Bykski A-AR7900XTX-X

Contents

Bykski A-AR7900XTX-X GPU Water Block User Manual

Model: A-AR7900XTX-X

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Bykski A-AR7900XTX-X GPU Water Block. Please read this manual thoroughly before proceeding with installation to ensure proper function and to prevent damage to your components.

Product Overview

The Bykski A-AR7900XTX-X is a high-performance GPU water block designed for specific AMD Radeon RX 7900 XTX graphics cards. It features a three-layer structure, combining electroplated high-purity copper and clear acrylic for efficient heat dissipation and aesthetic appeal. The block incorporates a jet microchannel structure and a T2 high-purity copper plate to ensure optimal cooling performance for the GPU core, RAM, and MOS components.

This water block also supports 5V 3PIN ARGB lighting, allowing for customizable visual effects that can be synchronized with various motherboard RGB systems.

Bykski A-AR7900XTX-X GPU Water Block with clear acrylic top and backplate

Figure 1: Bykski A-AR7900XTX-X GPU Water Block

Compatibility

This GPU water block is compatible with the following graphics card models:

  • ASRock AMD Radeon RX 7900 XTX Taichi
  • ASRock RX 7900 XTX Phantom Gaming OC

Note: Compatibility is based on reference designs only. The block may not fit altered, super-clocked, or other third-party variations that deviate from the reference design. Stock backplates are not guaranteed to fit due to mounting variances.

Compatibility table showing ASRock Radeon RX 7900 XTX Taichi and PCB exhibition

Figure 2: Compatible GPU models and PCB layout example

2. Setup and Installation

Careful installation is crucial for optimal performance and to prevent damage. Please follow these steps precisely.

2.1 Pre-Installation Checklist

  • Ensure your graphics card is compatible with the A-AR7900XTX-X water block.
  • Gather all necessary tools: screwdriver set, thermal paste/pads, cleaning solution (e.g., isopropyl alcohol), lint-free cloth.
  • Work in a clean, static-free environment.

2.2 Installation Steps

  1. Remove Original Radiator: Carefully remove the original cooling solution (radiator/heatsink) from your graphics card.
  2. Clean GPU and Components:
    • Clean up any original circuit and chip residue from the GPU.
    • Thoroughly clean the GPU die, memory chips, and MOS tubes with isopropyl alcohol and a lint-free cloth.
  3. Apply Thermal Interface Material:
    • Apply a thin, even layer of silicone grease (thermal paste) to the GPU core.
    • Affix thermal pads to the memory thermal conductive gasket and MOS thermal conductive gasket areas as shown in the diagram. Cut the heat conducting strip into proper size if necessary.
    Diagram showing thermal paste application before and after, and placement of thermal pads on memory and MOS components

    Figure 3: Thermal paste and pad application

    Important Warning: No heat conducting pads are required on the inductance. The graphics memory and MOS tubes marked in the gray area MUST be affixed with thermal pads, otherwise the graphics card will burn off.

  4. Install Water Block and Backplate:
    • Put the spacer column into the screw column.
    • Fit the graphics card cold head (water block) to the graphics card.
    • Align the screw column of the water cooling head with the screw holes of the graphics card.
    • If your graphics card has its own backplane and you ordered the cold head with a backplane: After placing the backplane on the back of the graphics card, use the backplane screws to lock the corresponding screw holes.
    • Secure the water block and backplate (if applicable) using the provided screws. First set the spring and gasket screw, then screw to diagonal. Wait for 4 screws. After the wire is engaged with the mounting backboard, tighten the corners in turn.
    Exploded diagram of water block installation with parts list and screw placement

    Figure 4: Water block and backplate installation diagram with parts list

    List of Installation Parts:

    Item Description Quantity
    ① A-AR7900XTX-X 1 PCS
    ② 1.5MM Grease 5 PCS
    ③ PCB 1 PCS
    ④ M2X5MM Grub Screw 4 PCS
    ⑤ Backplane 1 PCS
    ⑥ Aluminum backplane 8 PCS
  5. Connect RGB Lighting (if applicable):
    • For 5V RBW(A-RGB) lighting, connect the B-CNTR-95X3L tieline (3-pin interface) to the appropriate 5V ADD_HEADER on your motherboard. Ensure correct alignment with the needle insertion.
    • For 12V RGB lighting, connect the B-CNTR-95X4L tieline (4-pin interface) to the appropriate 12V RGB_HEADER on your motherboard. Ensure correct alignment with the needle insertion.
    Wiring diagram for 5V RBW(A-RGB) lighting connection to motherboard

    Figure 5: 5V RBW(A-RGB) lighting connection

    Wiring diagram for 12V RGB lighting connection to motherboard

    Figure 6: 12V RGB lighting connection

  6. Connect Water Cooling Loop: Connect your G1/4 thread fittings and tubing to the water block. Ensure all connections are secure and leak-free.

3. Operation

3.1 Water Cooling System Operation

Once the water block is installed and integrated into your custom liquid cooling loop, ensure your pump is filled and primed according to its manufacturer's instructions. Perform a leak test before powering on your system. The water block's design ensures efficient heat transfer from the GPU, RAM, and MOS components to the coolant.

Water-cooled fluid flow diagram showing heat dissipation principle

Figure 7: Water-cooled fluid flow diagram

3.2 RGB Lighting Control

The water block supports 5V 3PIN ARGB lighting, offering a dazzling color pattern with 16.7 million colors. The lighting effects can be controlled via your motherboard's RGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) or a compatible external RGB controller. If a remote control is provided with your RGB accessories, you can use its buttons to switch between different light effect modes.

Bykski GPU water block with vibrant RGB lighting

Figure 8: RGB lighting effect display

Examples of RGB lighting patterns on the water block

Figure 9: RGB circulation patterns

3.3 Real-time Temperature Monitoring (Optional)

This water block can be extended with real-time temperature monitoring capabilities, typically via an OLED LCD screen thermometer (sold separately or integrated into some versions). This allows for ultra-fast temperature refresh (0.15s) to monitor the water cooling system's temperature in real-time.

Image showing a water block with an integrated real-time temperature monitor

Figure 10: Example of real-time temperature monitoring

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your water block and cooling system.

4.1 Cleaning the Water Block

The water block features a 0.5mm jet microchannel structure designed for good passability and resistance to clogging. With proper water-cooled liquid (coolant) and regular system flushing, disassembly for maintenance may not be required for 1 to 2 years.

  • Coolant Quality: Always use high-quality, purpose-designed liquid cooling coolants to prevent algae growth and particle buildup.
  • System Flushing: Periodically flush your entire liquid cooling loop to remove any accumulated debris or degraded coolant.
  • Disassembly (if necessary): If you observe significant buildup or reduced performance, the water block can be disassembled for thorough cleaning. Use soft brushes and appropriate cleaning solutions for liquid cooling components. Avoid abrasive materials.
Diagram illustrating the jet microchannel structure and T2 high purity copper plate

Figure 11: Jet microchannel structure for efficient flow

5. Troubleshooting

5.1 Common Issues and Solutions

  • Water Block Does Not Fit:
    • Ensure your graphics card model is listed as compatible.
    • Do not force the water block onto the graphics card. Forcing it can cause irreparable damage.
    • Contact a technician or Bykski support if you encounter fitting issues, especially if your card is an altered or non-reference design.
  • Graphics Card Not Functioning After Installation:
    • Verify that all thermal pads are correctly placed on the graphics memory and MOS tubes. Missing thermal pads in these areas can lead to component burnout.
    • Double-check all power connections to the graphics card and motherboard.
    • Ensure the water block is securely mounted and not causing any shorts.
  • Poor Cooling Performance:
    • Verify that thermal paste is correctly applied to the GPU core and thermal pads are making good contact.
    • Check for air bubbles in the loop. Tilt your system gently to help dislodge them.
    • Ensure your pump is operating correctly and coolant is flowing.
    • Inspect the water block for any clogs or debris, especially if using non-clear coolants or if the system hasn't been flushed recently.
  • RGB Lighting Not Working:
    • Ensure the RGB cable (3-pin ARGB or 4-pin RGB) is correctly connected to the corresponding header on your motherboard or controller. Pay attention to the alignment needle.
    • Check your motherboard's BIOS/UEFI settings or RGB software to ensure the header is enabled and configured.
    • Verify that the RGB controller (if external) is powered and functioning.

6. Specifications

Feature Detail
Model Number A-AR7900XTX-X
Brand Name Bykski
Type VGA Front Water Block
Use for Video card (ASRock AMD Radeon RX 7900 XTX Taichi, ASRock RX 7900 XTX Phantom Gaming OC)
Material Electroplated High Purity Copper / Clear Acrylic (T2 High Purity Copper Plate)
Heatsink Material Copper
RGB Support A-RGB (5V 3PIN ARGB Lighting)
Screw Thread G 1/4'
Thermal Pads Included
Compression Fittings Included No
Certification CE
Origin Mainland China
Dimensions (Water Block) Length: 272.85 mm, Height: 155.72 mm, Thickness: 23.05 mm
Dimensions (Backplate) Length: 272.85 mm, Height: 125.46 mm, Thickness: 6.00 mm
Annex (Included Accessories) Adapter/backplane screw, spring screw, instruction, insulating gasket, spacer, thermal paste, silicone grease, plug
Screen (Optional) Tem. control display, OLED LCD screen
Product size diagram showing front, side, and top views with dimensions in millimeters

Figure 12: Product Dimensions

Product parameters table and image of the exclusive back panel

Figure 13: Exclusive back panel and additional product parameters

7. Warranty and Support

7.1 Product Warranty

This Bykski GPU Water Block comes with a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. Please retain your proof of purchase for warranty claims.

The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or use with incompatible components.

7.2 Technical Support

For technical assistance, troubleshooting, or further inquiries, please visit the official Bykski website:

http://www.bykski.com/

You can also scan the QR code on the original packaging or visit the website, use the search bar to find your specific model (A-AR7900XTX-X) for additional product details, installation guides, and tutorials.

Bykski logo

Figure 14: Bykski Official Logo

8. User Tips

  • Leak Testing is Critical: Always perform a 24-hour leak test with only the pump running (no power to other components) before introducing power to your system. This helps identify any leaks before they can cause damage.
  • Use Quality Coolant: Invest in a good quality, non-conductive coolant specifically designed for PC liquid cooling. This prevents corrosion, biological growth, and maintains system integrity.
  • Cable Management: When connecting RGB cables, ensure they are routed neatly and do not interfere with fans or other components. Proper cable management also aids in airflow.
  • Monitor Temperatures: Even with water cooling, it's good practice to monitor your GPU temperatures using software to ensure the system is performing as expected.

9. Product Video

Watch the official product video for a visual overview of the Bykski A-AR7900XTX-X GPU Water Block.

Video 1: Bykski A-AR7900XTX-X GPU Water Block Overview

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.