PeriPage P90-Pino Wireless Tattoo Stencil Printer User Manual

1. Introduction

Thank you for choosing the PeriPage P90-Pino Wireless Tattoo Stencil Printer. This compact and efficient thermal printer is designed for creating high-quality tattoo stencils directly from your mobile device or computer. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure you get the best experience from your device.

2. Package Contents

Please check the box for the following items:

• 1x PeriPage P90-Pino Tattoo Stencil Printer
• 5x Tattoo Transfer Paper
• 1x USB to USB-C Adapter
• 1x USB-C Cable
• 1x Quick Start Guide
• 1x User Manual (this document)

3. Product Overview

The PeriPage P90-Pino printer features a sleek, portable design with intuitive controls.

3.1. Controls and Indicators

• Paper Change Button: Press both buttons simultaneously to open the cover and exchange paper.
• USB Data Cable Port: Connects to a power bank or mobile phone charger for charging, or to a computer for printing.
• Power Button:
  • Press and hold for 2 seconds to turn the printer ON or OFF.
  • Double-click to print the device connection QR code.
  • Single-click to terminate printing.

3.2. Power Indicator Status

• Green light ON: Indicates normal printing status or fully charged battery.
• Red light ON: Indicates the cover is open, no paper, over-heat condition, or charging in progress.
• Green light FLASHING: Indicates paper suction mode. Please install folded paper.
• Red light FLASHING: Indicates low battery. Please charge the device promptly.

4. Setup

4.1. Charging the Printer

• Use a 5V/2A power input. It is recommended to use a mobile phone charger for optimal charging.
• Charge the battery fully before the first use.
• If the printer is not used for an extended period, charge it every 3 months to prevent long-term natural loss of lithium battery capacity.

Operating Environment: 5°C-40°C ambient temperature, 45%-90% RH (non-condensing state).

Caution: This is a Class A product. It may cause radio interference in a living environment. In such cases, users may need to take actions against interference.

4.2. Paper Installation

The printer supports both roll paper and folded sheet paper.

4.2.1. Roll Paper Installation

1. Press the left and right paper change buttons simultaneously to open the printer cover.
2. Place the roll paper with the printing side facing upwards. Ensure the paper edge extends slightly over the printer's opening.
3. Close the printer cover firmly.

4.2.2. Folded Paper Installation (Tattoo Transfer Paper)

Ensure there is no roll paper inside the printer before installing folded paper.

1. Unpack: Remove the pearl cotton from the box to allow sufficient upward buffer space for the folded paper during discharge.
2. Prepare Paper: Take out the top layer of the tattoo transfer paper with the printing side facing up. The black label should also be facing up.
3. Load Paper: Align the paper with the paper inlet and insert it until it is automatically sucked in and cannot be pulled out. Ensure the paper house is empty and the cover is tightly closed.
4. Tear Paper: After printing, tear off the stencil along the perforated tear line.

5. Operating the Printer

5.1. Mobile App Printing

1. Turn On: Press and hold the power button for 2 seconds to turn on the printer.
2. Download App: Search for "FxPrint" (or "PeriPage") in your mobile app store and download it.
3. Connect to Printer: Open the App. Follow the prompts to search for and connect to the printer. Alternatively, double-click the power button on the printer to print a QR code, then scan the QR code with the App to connect. (Important: Do NOT connect the printer directly via your phone's Bluetooth settings. Connect only through the App.)
4. Print: Select and edit the content you wish to print within the App, then confirm and initiate printing.

App Download QR Codes:

Operation Video Demonstration:

5.2. Computer Printing

1. Turn On: Press and hold the power button for 2 seconds to turn on the printer.
2. Connect: Connect the printer to your computer using the original USB cable.
3. Install Driver: Visit the website https://u.pcloud.link/publink/show?code=XZqAbj0Z6Jbp32WzLR8RxjiQyT2ioRFf0f8X to download and install the printer driver.
4. Print: When printing documents from your computer, select the PeriPage P90-Pino printer from your printer options.

6. Maintenance

6.1. Cleaning the Printer Head

Regular cleaning of the print head ensures optimal print quality and extends the life of your printer.

1. Turn off the printer and open the printer cover. Remove any paper inside.
2. Dip a cotton cloth or cotton swab in medical alcohol (e.g., isopropyl alcohol).
3. Gently wipe the print head from the center outwards to the periphery.
4. After cleaning, do not use the printer immediately. Wait for 1 to 2 minutes to allow the alcohol to completely evaporate before closing the cover and turning on the printer.

7. Specifications

8. Troubleshooting

If you encounter issues with your PeriPage P90-Pino printer, please refer to the following common solutions:

• Printer not turning on: Ensure the battery is charged. Connect the printer to a power source and check the red indicator light for charging status.
• Printing issues (no print, blank pages):
  • Verify that paper is loaded correctly and the cover is securely closed.
  • For mobile printing, ensure the printer is properly connected via the "FxPrint" App and not directly through your phone's Bluetooth settings.
  • For PC printing, confirm that the printer driver is installed correctly and the USB cable is securely connected.
• Poor print quality (faint, streaky prints): The print head may be dirty. Refer to Section 6.1 "Cleaning the Printer Head" for instructions.
• Printer overheating: If the red indicator light is on due to overheating, allow the printer to cool down before resuming operation.

9. User Tips

• Always use high-quality thermal A4 paper or quadruple tattoo transfer paper for best results.
• When using tattoo transfer paper, pay close attention to the printing details and instructions on the back of the paper to ensure optimal stencil transfer.
• For mobile connectivity, always initiate the Bluetooth connection through the official "FxPrint" app. Connecting directly via your phone's system Bluetooth settings may lead to connectivity issues.
• Keep the printer's firmware updated through the app to ensure compatibility and access to new features.

10. Warranty & Support

10.1. Warranty Policy (China Mainland)

For non-human induced appearance or performance failures, the product is covered by national "Three Guarantees" services from the date of receipt:

• Within 7 days: Return, replacement, or repair.
• Within 15 days: Replacement or repair.
• Within 1 year: Free repair.

Exclusions from "Three Guarantees" Service:

• Damage caused by force majeure.
• Unauthorized repair/disassembly.
• Battery depletion due to long-term (approx. 3 months) non-charging, rendering it unable to activate.

10.2. Contact Information

We are committed to providing you with an easy-to-use printing experience that delivers outstanding results. If you have any questions or need further assistance, please feel free to contact us:

• Tel: +86 13431006400
• Email: salesgzqj@hotmail.com
• Whatsapp: +86 15920362500

For visual guidance, an operation video demonstration is available at: https://youtu.be/qDV9aZZwaeE