1. Product Overview
The CONENTOOL XCJ-002 is a versatile cordless electric high-pressure water spray gun designed for various cleaning tasks, including car washing, outdoor AC unit cleaning, yard cleaning, and greenery watering. It features a powerful 650W brushed motor, a 6-in-1 multi-functional nozzle, and is powered by a 21V rechargeable battery compatible with Makita 18V batteries.
2. Package Contents
Please check the package contents upon receipt to ensure all items are present:
- High-Pressure Water Spray Gun (main unit)
- 5m Water Pipe
- Foam Pot
- 6-in-1 Nozzle
- Charger
- Filter
- Instruction Manual
- Battery (1 pcs or 2 pcs, depending on purchased variant)
3. Setup Instructions
- Charge the Battery: Before first use, fully charge the battery using the provided charger. Connect the charger to a power outlet and then to the battery. Ensure the battery is charged indoors and not exposed to rain.
- Install the Battery: Slide the charged battery into the base of the spray gun handle until it clicks securely into place.
- Connect the Water Pipe: Attach one end of the 5m water pipe to the water inlet on the spray gun. Ensure a tight connection to prevent leaks.
- Prepare Water Source: The spray gun supports multiple self-priming water sourcing methods:
- Coke Bottle Self-Priming: Attach the pipe to a standard coke bottle.
- River Self-Priming: Place the filter end of the pipe into a river or other natural water source.
- Bucket Self-Priming: Place the filter end of the pipe into a bucket of water.
- Attach Nozzle/Foam Pot: Select the desired attachment (6-in-1 nozzle or foam pot) and securely attach it to the front of the spray gun.
4. Operating Instructions
- Power On: Press the push-button start on the handle to activate the spray gun.
- Select Spray Pattern: Rotate the head of the 6-in-1 multi-functional nozzle to select the desired spray pattern. Options typically include 0° (direct jet), 15°, 25°, 40° (fan spray), and a general 'spray' setting for wider coverage.
- Begin Cleaning: Aim the nozzle at the surface to be cleaned and press the trigger. Maintain a safe distance from the surface, especially with higher pressure settings, to avoid damage.
- Foam Cleaning: If using the foam pot, fill it with appropriate car wash soap or cleaning solution. Attach it to the gun and spray to apply thick, rich foam for deep cleaning.
- Power Off: Release the trigger to stop the water flow. For complete shutdown, release the push-button. The intelligent gun shutdown feature helps extend motor life.
5. Maintenance
- Battery Care: Always charge the battery fully after each use and before long-term storage. Store the battery in a cool, dry place. Do not expose the battery or charger to moisture.
- Filter Cleaning: Regularly inspect and clean the water filter to prevent blockages and ensure optimal water flow. Rinse the filter with clean water to remove any debris.
- Nozzle Maintenance: After use, rinse the nozzle and foam pot thoroughly to remove any soap residue or dirt.
- Storage: Disconnect the battery and water pipe. Drain any remaining water from the gun and pipe. Store the unit and accessories in a dry, protected area, away from direct sunlight and extreme temperatures.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Gun does not turn on | Battery not charged or improperly installed. | Ensure battery is fully charged and correctly inserted. |
| Low water pressure | Water filter clogged; insufficient water supply; air in the system. | Clean the water filter. Ensure water source is adequate. Prime the pump by running water through it without the nozzle for a few seconds. |
| No water flow | Water pipe kinked or blocked; water source empty; filter clogged. | Check water pipe for kinks. Replenish water source. Clean the filter. |
| Water leaks from connections | Loose connections; worn O-rings. | Tighten all connections. Inspect and replace O-rings if damaged. |
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | CONENTOOL |
| Model Number | XCJ-002 |
| Rated Voltage | 21V |
| Rated Power | 650W |
| Product Speed | 19000 r/min |
| Water Pressure | 70 Bar |
| Rated Flow | 4 L/min |
| Water Pipe Length | 5m |
| Battery Capacity | 2000mAh / 2.0Ah |
| Spray Head | 6-in-1 Spray Head |
| Motor Type | Brushed Motor |
| Power Type | Electric |
| Feed Type | Pressure |
| Application | Washing Gun |
| Use | Home DIY |
| Certification | CE, WEEE |
| Origin | Mainland China |
| Battery Included | Yes |
8. Warranty and Support
This product is covered by a manufacturer's warranty. For specific warranty details and duration, please refer to the documentation provided with your purchase or contact the seller directly. The product is certified original, ensuring quality and authenticity.
Returns: Free returns are available within 90 days of purchase. Please refer to the seller's return policy for detailed instructions.
Security & Privacy: Your personal details are protected and not shared with third parties without consent. Payments are secure.
9. User Tips
- For optimal cleaning, start with a wider spray pattern (e.g., 40°) to wet the surface, then switch to a narrower, higher-pressure spray (e.g., 15° or 0°) for stubborn dirt.
- When using the foam pot, pre-soaking the surface with foam can significantly improve cleaning results, especially for vehicles.
- Always test the spray on an inconspicuous area first to ensure it does not damage the surface.
- Keep the battery charged for consistent performance. A partially charged battery may result in reduced pressure.
- Ensure the water pipe is free of kinks and the filter is clean to maintain steady water flow and pressure.