iScooter Y18

Contents

iScooter Y18 Electric Moto Scooter User Manual

Model: Y18

Brand: iScooter

1. Introduction

Thank you for choosing the iScooter Y18 Electric Moto Scooter. This manual provides essential information for the safe operation, maintenance, and care of your new electric scooter. Please read it thoroughly before your first ride and keep it for future reference. The Y18 is designed for an effortless driving experience, featuring a powerful 2000W motor, a 48V 20Ah battery, and 15-inch vacuum inflatable off-road tires, offering a maximum speed of 55 km/h and a range of 80-90 km.

2. Safety Information

Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

  • Always wear a helmet and appropriate safety gear (knee pads, elbow pads, gloves) when riding.
  • Familiarize yourself with local traffic laws and regulations regarding electric scooters and motorcycles.
  • Do not ride under the influence of alcohol or drugs.
  • Avoid riding in heavy rain, snow, or icy conditions.
  • Ensure all components are securely fastened and in good working order before each ride.
  • Keep hands and feet on the designated areas while riding.
  • Do not exceed the maximum load capacity of 150 kg.
  • Recommended age for riders is 14 years and above.

3. Package Contents

Upon unpacking, please verify that all items listed below are present and in good condition:

Accessories included with the iScooter Y18: NFC key cards, tools, installation manual, charger, rearview mirrors, and storage compartment keys.
Figure 1: Accessories included with your Y18 scooter.
  • iScooter Y18 Electric Moto Scooter
  • NFC Key Cards (for unlocking)
  • Tools (4 keys)
  • Installation Manual
  • Charger
  • Rearview Mirrors
  • Storage Compartment Keys

4. Product Overview

Familiarize yourself with the main components of your iScooter Y18:

Diagram showing the labeled parts of the iScooter Y18 electric moto scooter, including mirrors, throttle, display, charging port, kickstand, taillight, direction indicators, headlight, front fender, disc brake rotor, footrests, shock absorbers, storage compartments, and brake levers.
Figure 2: Labeled components of the Y18 Electric Moto Scooter.
  • Mirrors: For rear visibility.
  • Throttle: Controls acceleration.
  • Display: Smart LCD Color Round Dashboard showing operating data.
  • Charging Port: For connecting the charger.
  • Kickstand: For parking the scooter.
  • Taillight & Direction Indicators: For visibility and signaling turns.
  • Headlight: Ultra-bright LED for night driving.
  • Front Fender: Protects from splashes.
  • Disc Brake Rotor: Part of the front braking system.
  • Footrests: For rider's feet.
  • Shock Absorbers: Front sleeve and rear spring for damping.
  • Storage Compartments: For carrying small items.
  • Brake Levers: Controls the front disc brake and rear drum brake.

5. Specifications

Feature Specification
Model Number Y18
Brand Name iScooter
Max Motor Power 2000W
Voltage 48V
Battery Capacity 48V 20Ah Lithium battery
Max Speed 55 km/h (unlocked) / <25 km/h (limited)
Max Range 80-90 km
Tire Type 15" x 3.0" Vacuum Inflatable Off-Road Tires
Net Weight 49.9 kg
Gross Weight 54.5 kg
Maximum Load 150 kg
Charging Time 9-10 hours
Dimensions (L x H x W) 145 cm x 116 cm x 66 cm
Recommended Age 14 years and above
Image displaying key specifications of the Y18 Electric Motorcycle: Tire size 15x3.0, Battery 48V 20Ah, Maximum range 80-90km, Maximum speed 55km/h, Motor 2000W, Net weight 49.9kg, Recommended age 14 years, Maximum load 150kg.
Figure 3: Key specifications of the Y18 Electric Moto Scooter.
Image showing the dimensions of the Y18 Electric Moto Scooter: 145cm length, 116cm height, 66cm width. Also lists Maximum load 150kg, Gross weight 54.5kg, Net weight 49.9kg.
Figure 4: Dimensions and weight of the Y18 Electric Moto Scooter.

6. Setup and Assembly

Your iScooter Y18 may require some minor assembly before its first use. Please refer to the included 'Installation Manual' for detailed, step-by-step instructions. General steps include:

  1. Unpacking: Carefully remove all components from the packaging.
  2. Handlebar Installation: Attach the handlebars securely.
  3. Mirror Attachment: Install the rearview mirrors onto the handlebars.
  4. Initial Charge: Fully charge the battery before the first ride. Refer to the Charging section for details.
  5. Pre-Ride Check: Before your first ride, ensure all bolts are tightened, tires are properly inflated, and brakes are functioning correctly.

7. Operating Instructions

7.1 Power On/Off and NFC Unlocking

The Y18 features NFC unlocking technology for a smart and effortless driving experience.

  1. To power on, ensure the scooter is stable.
  2. Tap your NFC key card against the designated area near the dashboard.
  3. The scooter will power on, and the display will show a "Ready to Start" prompt.
  4. To power off, tap the NFC key card again or use the power button if available.

7.2 Smart LCD Color Round Dashboard

The 6-inch LCD dashboard displays crucial operating data at a glance:

Close-up of the Smart LCD Color Round Dashboard showing various indicators: 'Ready to Start' Prompt, Headlight is on, Left Direction Indicator, Real-time Speed, Right Direction Indicator, Error Codes, Riding Mode, Battery Voltage, Battery Level, Odometer, and NFC unlocking area.
Figure 5: Smart LCD Color Round Dashboard indicators.
  • "Ready to Start" Prompt: Indicates the scooter is ready for operation.
  • Headlight is on: Indicator for headlight status.
  • Left/Right Direction Indicator: Shows active turn signal.
  • Real-time Speed: Current riding speed.
  • Error Codes: Displays diagnostic codes if an issue occurs.
  • Riding Mode: Indicates the currently selected speed mode.
  • Battery Voltage: Current battery voltage.
  • Battery Level: Remaining battery charge.
  • Odometer: Total distance traveled.

7.3 Speed Modes and Limiter

The Y18 offers multiple adjustment modes to suit different riding preferences and regulations:

Table showing four speed modes for the Y18 scooter. Mode 1: Initial speed 5 km/h, speed after cracking 25 km/h. Mode 2: Initial speed 10 km/h, speed after cracking 35 km/h. Mode 3: Initial speed 15 km/h, speed after cracking 45 km/h. Mode 4: Initial speed 25 km/h, speed after cracking 55 km/h. Includes instructions for unlocking the speed limiter.
Figure 6: Multiple speed adjustment modes and speed limiter unlock method.
Mode Initial Speed Speed After Cracking (Unlocked)
Mode 1 5 km/h 25 km/h
Mode 2 10 km/h 35 km/h
Mode 3 15 km/h 45 km/h
Mode 4 25 km/h 55 km/h

Method to unlock the speed limiter: With the vehicle off, squeeze the brake lever and turn the accelerator lever fully. Turn on the device via NFC, then hold this position for 10 seconds — the speed limiter will then be unlocked.

7.4 Lighting System and Horn

The Y18 is equipped with an ultra-bright lighting system and a powerful horn for safety:

Image showing the ultra-bright LED headlight, taillight, and turn signals of the Y18 scooter, ensuring safe driving at night and in low visibility.
Figure 7: Ultra-bright lighting system (Headlight, Taillight, Turn Signals).
Dashboard view showing the horn switch and light switch, indicating the scooter is equipped with a powerful horn and bright lights for noisy and poorly lit environments.
Figure 8: Horn and Light switches on the handlebar.
  • Use the headlight for night riding and in low visibility conditions.
  • Activate the taillight and direction indicators to signal your presence and turns to others.
  • The horn switch is located on the handlebar for alerting pedestrians or other vehicles.

7.5 Braking System

The Y18 features a high-protection braking system for reliable stopping power:

Image showing a rider braking on the Y18 scooter, highlighting the fully updated high-protection braking system with front disc brake and rear drum brake (with power cut-off brake).
Figure 9: High-protection braking system.
  • The scooter is equipped with a front disc brake and a rear drum brake.
  • The rear drum brake includes a power cut-off feature for enhanced safety.
  • Always apply brakes smoothly and gradually to avoid skidding.

8. Charging

Proper charging is crucial for battery longevity and safety.

Diagram illustrating the internally certified high-performance, high-capacity 48V 20Ah battery, with specifications for 80-90 km range, 55 km/h maximum speed, and 9-10 hours charging time.
Figure 10: Battery specifications and charging time.
  1. Locate the charging port on your scooter (refer to Figure 2).
  2. Ensure the scooter is powered off before connecting the charger.
  3. Connect the charger to the scooter's charging port, then plug the charger into a standard power outlet.
  4. The charging indicator on the charger will show the charging status (e.g., red for charging, green for fully charged).
  5. A full charge typically takes 9-10 hours. Do not overcharge the battery.
  6. Always use the original charger provided with your scooter.
  7. Store the scooter and charger in a cool, dry place, away from flammable materials.

9. Maintenance

Regular maintenance ensures the longevity and safe operation of your Y18 scooter.

9.1 Tires

Image showing 15x3.0 inch vacuum inflatable all-terrain tires, with examples of muddy, urban, snowy, and beach roads, indicating suitability for all terrains.
Figure 11: 15" x 3.0" Vacuum Inflatable All-Terrain Tires.
  • Check tire pressure regularly. Maintain recommended pressure for optimal performance and safety.
  • Inspect tires for wear, punctures, or damage before each ride.
  • The 15" x 3.0" vacuum inflatable off-road tires are designed for various terrains, including muddy, urban, snowy, and beach roads.

9.2 Battery Care

  • Avoid completely draining the battery. Charge it regularly, even if not in use for extended periods.
  • Store the scooter with a partially charged battery (around 50-70%) if storing for a long time.
  • Do not expose the battery to extreme temperatures.

9.3 Brakes

  • Regularly check the brake levers and cables for proper tension and function.
  • Inspect the disc brake rotor and drum brake for wear. Replace components as needed.

9.4 Shock Absorbers

Image illustrating the dual damping design of the Y18 scooter, showing the front sleeve shock absorber and rear spring shock absorber, which ensure vehicle stability on sharp turns or rough roads.
Figure 12: Dual damping design with front sleeve and rear spring shock absorbers.
  • The dual damping system (front sleeve and rear spring shock absorbers) helps maintain stability. Periodically check for any signs of damage or leaks.

9.5 General Cleaning

  • Clean the scooter with a damp cloth. Avoid using high-pressure water jets directly on electrical components.
  • Do not use abrasive cleaners or solvents.

10. Troubleshooting

If you encounter issues with your Y18 scooter, refer to the following common troubleshooting steps:

  • Scooter not turning on: Ensure the battery is charged and the NFC key card is correctly used. Check for any error codes on the display.
  • Loss of power/reduced range: Check battery level. Ensure the battery is fully charged. Battery performance can degrade over time or in cold weather.
  • Brakes not effective: Inspect brake pads and cables. Adjust brake tension if necessary. If wear is significant, replace components.
  • Unusual noises: Stop riding immediately and inspect the scooter for loose parts, damaged components, or foreign objects.
  • Error Codes on Display: Note down the error code and consult the official iScooter support for specific diagnostics.

11. User Tips

  • Pre-Ride Inspection: Always perform a quick check of tires, brakes, lights, and battery level before each ride.
  • Smooth Acceleration: Apply the throttle gradually for a smoother ride and to conserve battery life.
  • Anticipate Traffic: Ride defensively and be aware of your surroundings, especially in urban environments.
  • Secure Parking: Always use the kickstand and consider additional locking mechanisms when parking your scooter.
  • Regular Cleaning: Keep your scooter clean to prevent dirt and debris from affecting moving parts and electrical components.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please contact iScooter customer service through the official channels. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.