1. Introduction
Dear Customer,
Thank you for purchasing the ILIFE A30 Pro Robotic Vacuum Cleaner! You've joined the millions of people cleaning with robots - the smartest way to do it.
Please take a few moments to read through this manual and familiarize yourself with your robot to achieve the best performance. If you encounter any issues with your robot, feel free to contact our customer service at warranty_repair_EU@iliferobot.com or visit our website at www.iliferobot.com for further assistance.
2. What's in the Box
The ILIFE A30 Pro package includes the following components:
Video: Unboxing the ILIFE A30 Pro Robot Vacuum Cleaner, showing all included accessories.

Image: Detailed packing list showing the robot vacuum, self-empty station, dust bags, 2-in-1 dustbin & water tank, mopping support, mop cloths, remote control, side brush, user manual, and high-efficiency filter.
- Robot Vacuum x1
- Self-Empty Station x1
- 2in1 Dustbin & Water Tank x1
- Mopping Support x1
- Mop Cloths x2
- Dust Bags x5
- Remote Control x1
- Side Brush x1
- User Manual x1
- High-efficiency Filter x1
Note: Product illustrations in this manual are for reference only. Due to updates and improvements, actual products may differ slightly from illustrations.
3. Technical Specifications
Robot
| Specification | Details |
|---|---|
| Model | A30 Pro |
| Dimensions | 330 x 330 x 95 mm |
| Battery Type | Li-ion |
| Charging Time | < 300 minutes |
| Dustbin Capacity | 0.2 L |
| Water Tank Capacity | 0.2 L |
| Net Weight | 2.7 kg |
| Power (W) | 40W |
| Voltage | 14.4 V |
| Max. Suction | 5000Pa |
| Battery Capacity | 3200mAh / 14.4V |
| Run Time | 180 Minutes |
| Cleaning Coverage | 180㎡ |
| Filter Type | HEPA |
| Certification | CE |
| Connection | WiFi (2.4G) + Bluetooth |
Self-Empty Station
| Specification | Details |
|---|---|
| Dimensions | 285 × 145 × 253 mm |
| Rated Input | 220V-240V ~ 50/60 Hz |
| Rated Output | 19V = 0.6A |
| Dust Bag Capacity | 2.5 L |
| Net Weight | 2.0 kg |
| Dust Collection Power | 12000Pa Cyclone Dust Collection |
| Dust Bag Free Period | Up to 7 Weeks |
Note: Specifications are subject to change without notice as we continuously improve our products.
4. Product Overview
Robot Components

Image: Top view of the robot vacuum, highlighting the Obstacle Sensor, Start/Pause Button, and LiDAR Sensor.

Image: Bottom view of the robot vacuum, highlighting Cliff Sensors, Side Brush, Side Wheels, Nose Wheel, Battery Compartment, 2-in-1 Roller Brush, 2-in-1 Dustbin & Water Tank, Charging Pins, and Water Tank Release Button.
Water Tank Assembly

Image: Exploded view of the water tank assembly, detailing Primary Filter, Sponge Filter, High Performance Filter, Water Inlet Plug, Dust Outlet, Mop Bracket, and Mop Cloth.
Self-Empty Station Components

Image: Diagram of the self-empty station, detailing Top Cover, Status Indicator Light, Dust Inlet, Dust Bag, Charging Pins, and Lens Sensor.
5. Buttons and Indicator Lights
Robot Button Instruction
| Button | Operation | Function |
|---|---|---|
| Power | Press and hold 2 seconds | Power on |
| Short press | Start/Pause cleaning | |
| Press and hold 3 seconds | Power off | |
| Quick double presses | Return to charging dock | |
| Press and hold 25 seconds | System reset |
Robot Indicator Lights
| Light Color | Status | Description |
|---|---|---|
| Green | Solid | Sufficient battery |
| Blinking | Standby mode | |
| Orange | Blinking | Low battery |
| Blinking slowly | Charging | |
| Red | Flashing | Error |
Self-Empty Station Indicator Lights
| Light Color | Status | Description |
|---|---|---|
| Green | Solid | Robot fully charged |
| Blinking slowly | The station is powered on | |
| Orange | Blinking | Dust collection in progress |
| Blinking slowly | Robot charging | |
| Red | Flashing | No dust bag |
| Off | No light | Standby/sleep mode |
6. Remote Control Guide
Before using the remote, insert two AAA/R03 batteries. Remove the batteries if not used for a long time.

Image: Diagram of the remote control, showing buttons for Power, Direction, Suction, Path Mode, Edge Mode, Spot Mode, and Home.
| Button | Function |
|---|---|
| 1 Power | Wake the robot from sleep / Start or pause cleaning |
| 2 Direction | In standby mode: Forward, Left, Right (Not functional during running) |
| 3 Suction | Switch Suction Level by Each Press: Standard → Strong → Max → Silent → Standard |
| 4 Path Mode | Starts standard zigzag cleaning across the entire area |
| 5 Edge Mode | Cleans along walls and furniture edges |
| 6 Spot Mode | Deeply cleans a 1.5m × 1.5m area in a spiral pattern |
| 7 Home | Send the robot back to the charging dock manually |
7. Setup
7.1 Important Pre-Cleaning Notes
Frequent use helps the robot learn your home layout for more efficient path planning and reduced missed spots. Follow these guidelines before each use to protect your home and maximize the robot's cleaning efficiency:
- Remove loose items from the floor: Clear cables, clothing, or small objects that could get tangled in the wheels or brushes.
- Fold the rug's tassel trim underneath: Prevent tangling during cleaning. Avoid using on high-pile or thick rugs (>18mm or 0.71").
- Block off dangerous zones: For areas like fireplaces, vents, or staircases, place physical barriers or set "No-Go Zones" in the app.
- Avoid use on floor with excessive water: Avoid vacuuming large amounts of water as it will potentially damage the robot.
- Obstacle height limit: The robot can climb over thresholds up to 20mm (0.79").
- Cliff sensor limitations: Although the robot includes anti-drop sensors, performance may decrease on dark carpets or reflective surfaces, or if the sensors get stained. Use physical barriers as needed.
7.2 Installing and Using the Self-Empty Station
Placement Guidelines
- Place the station on a hard, flat surface against a wall.
- Ensure there are no obstacles within 1.5 meters in front and 0.5 meters on both sides.
- Avoid placing it in areas with strong sunlight or reflective surfaces.
- Keep it away from places where pets sleep to avoid noise disturbance.
Power Connection
Plug in the power cable. Once powered, the station's indicator light will turn on.
Dust Bag Installation
- Open the top cover of the station.
- Insert the dust bag with the small hole facing up and press it into place firmly.
- Close the cover. The green light will begin blinking slowly, indicating standby mode.
How Self-Emptying Works
Once the robot returns to the station and the charging pins align for 3 seconds, the station automatically starts dust collection. The inside fan motor runs for about 15 seconds, indicated by a blinking orange light, and the station is back to standby mode after finished.
7.3 Charging the Robot
Charging Steps
- Proper Placement: Align the robot with the charging pins on the station. When connected properly, the robot's orange charging light will blink slowly, indicating it is charging.
- Charging Completes: When all indicator lights turn off, the battery is fully charged.
Tip: Recharge the robot after each use to extend battery life.
Important Notes
- In Daily Use:
- Make sure the charging pins on the robot and station remain clean to avoid poor contact.
- Store the robot on the station with the station powered on.
- When Not in Use: For long-term storage, fully charge the robot, turn it off (press and hold power for 3 seconds), and store it in a dry, ventilated place.
7.4 Installing and Using the Water Tank & Mop
Installation Steps
- Remove the Water Tank: Press the water tank's release button and pull the tank backward to remove it.
- Fill the Water Tank: Open the rubber plug on the tank and fill with clean water. Use purified water to reduce limescale buildup. Reseal the plug tightly to prevent leakage.
- Attach the Mop Cloth: Smooth the mop cloth onto the bracket and use velcro to secure it. Align the bracket with the bottom of the tank and slide it in until it clicks into place.
- Start Mopping: Reinstall the tank into the robot. The robot will automatically detect the mop and switch to mop mode.
Important Notes
- Where Not to Use Mopping Mode:
☑ Do not use the mop on carpets. For best practice, zone out the carpet on app while mopping.
☑ Do not use hot water or cleaning agents (it may damage or clog the tank). - Maintenance Tips: Monitor water levels during mopping; refill when low. After mopping, remove the mop and wash/dry it to avoid mildew or odors.
8. Operating the ILIFE A30 Pro
8.1 Using the ILIFE Clean App
To access all features, it's recommended to control the robot through the ILIFE Clean App.
Network Compatibility
Supports 2.4GHz or dual-band 2.4GHz/5GHz networks. Does not support 5GHz-only networks.
Step-by-Step Setup
- Download the App: Scan the QR code or search for “ILIFE Clean” in your app store.
- Register/Login: Open the app and sign up or log in with your credentials.
- Enable Pairing Mode: Press and hold the AUTO button on the robot for 6 seconds. You'll hear "WiFi pairing started” and the WiFi light will start blinking slowly.
- Add Device: Tap "Add Device” or the “+” icon in the top right corner to begin connecting.
Wi-Fi Pairing Modes
Bluetooth Pairing Mode:
- Go to your phone's settings, turn on Bluetooth and enable Bluetooth permission for ILIFE Clean app.
- Return to the ILIFE Clean app — the device will appear automatically and tap "Add" to begin.
- Select your 2.4GHz Wi-Fi network and enter the password to go next.
- The device starts downloading.
- Device is added successfully and done.
AP (Access Point) Pairing Mode:
- In the app, choose your specific robot model.
- Choose your 2.4GHz Wi-Fi network and enter the password.
- Go to your phone's Wi-Fi settings and connect to a network that starts with "SmartLife". Return to the app once connected.
- Wait for the app to complete the device connection process.
Map Management
Open the ILIFE Clean app → Tap “Settings" → Select "Manage Map"
- Create/Switch Maps: Perfect for multi-floor homes (up to 5 maps supported).
- Reset/Delete Maps: Delete or reset a saved map.
Setting No-Go and No-Mop Zones
- No-Go Zone: Robot avoids both vacuuming and mopping in this area.
- No-Mop Zone: Robot vacuums but does not mop in this area.
- Virtual Wall: Acts as an invisible barrier the robot won't cross.
To set zones: Go to "Forbid Edit" in the app → Tap set restricted areas → Draw your desired zone and select the type.
Scheduled Cleaning
Ensure the charging station remains powered on. The robot should have sufficient battery charge.
To schedule: Open the ILIFE Clean app → Go to Scheduled Cleaning → Set the desired time and recurrence (e.g., daily or weekly) → Confirm your settings.
Selecting Cleaning Modes
- Start / Pause Cleaning: In the App: Tap the “Start/Pause" button. On the Robot: Press the power button once to start or pause cleaning.
- Smart Cleaning Mode: The robot will leave the station and automatically plan a cleaning route. It will return to the station when cleaning is complete.
- Room Cleaning Mode: Select specific room in the app for targeted cleaning.
- Zone Cleaning Mode: Draw a rectangular zone on the map in the app. Set the size and number of cleaning passes (e.g., clean 2x). The robot will clean that area and return to the station.
- Spot Cleaning Mode: For localized messes like pet food or snack spills. Tap the target spot on the map. The robot will deep-clean a 1.5m × 1.5m area in a spiral pattern, then return to base.
- Do Not Disturb Mode: Ideal for nighttime or rest hours. Once enabled, the robot will: Pause auto-charge and auto-resume cleaning. Stop self-emptying automatically. Shut down voice prompts.
Cleaning Plan Customization
- Suction & Water Level Adjustment: In the app via: “Cleaning Plan" → Adjust suction power (Silent / Standard / Strong / Max) and water flow (Low / Medium / High).
- Per-Room Customization: In the app via: “Cleaning Plan" → "Plan 1 / Plan 2” Set specific suction, water flow, number of passes, and cleaning sequence for each room.
8.2 Voice Assistant Setup (Alexa/Google Assistant)
Before setting up, please make sure:
- A30 Pro is fully charged and connected to ILIFE Clean app.
- You own a supported voice assistant device (e.g., Amazon Echo, Google Nest). These devices are sold separately.
- Alexa or Google Home app is installed on your mobile device.
- You have an active account for your voice assistant.
Alexa Setup
- Connect your robot to the ILIFE Clean app.
- Open the Alexa app → Tap Skills & Games → Search Smart Life.
- Tap "Enable to Use”.
- Enter your ILIFE Clean account credentials and authorize access.
- Tap "Authorize".
- Alexa will search and link your robot automatically.
9. Maintenance
9.1 Recommended Maintenance Frequency
Always turn off the robot and unplug the power adapter before performing maintenance.
| Component | Clean Frequency | Replace Frequency |
|---|---|---|
| Mop Cloth | As needed | Every 3-6 months |
| Dustbin | Weekly | N/A |
| Filter | N/A | Every 1-1.5 months |
| Side Brush | Weekly | Every 3-6 months (or if damaged) |
| Roller Brush | Weekly | Every 6 months |
| Side Wheels | Monthly | N/A |
| Cliff Sensors | Monthly | N/A |
| Charging Contacts | Monthly | N/A |
| Disposable Dust Bag | N/A | Every 1-1.5 months (or if damaged) |
9.2 Cleaning the Dustbin and Filter
- Press the release button to remove the 2-in-1 dustbin.
- Open the dustbin lid.
- Empty the dustbin.
- Remove the filters and rinse the dustbin with water.
- Dry thoroughly with a clean cloth.
- Replace the filter if necessary and reinsert the dustbin.
Note: The filter is unwashable.
9.3 Cleaning the Water Tank and Mop Cloth
Mop Cloth
- Remove the mop bracket and peel off the cloth.
- Rinse with clean water and let it air-dry completely.
2-in-1 Water Tank
- Open the rubber plug and drain any leftover water.
- Wipe the tank clean and let it dry thoroughly.
9.4 Cleaning the Roller Brush
- Unlock and lift the brush cover.
- Remove the roller brush by pulling it upward.
- Use the provided tool to cut away tangled hair or debris.
- Rinse the roller brush and cover with water.
- Air-dry those components.
- Reinstall the roller brush and snap the cover back into place.
9.5 Cleaning the Side Brushes and Side Wheels
Side Brushes
Unscrew and remove the brushes. Clear hair or debris wrapped around them.
Side Wheels
Check and remove any obstructions caught in the wheels.
9.6 Cleaning the Sensors and Charging Pins
Cliff Sensors
Use a soft brush to gently clean the sensors on the underside of the robot.
Charging Pins
Wipe both the robot's and station's charging pins with a dry cloth to maintain charging efficiency.
9.7 Replacing the Dust Bag and Cleaning the Station
Replace Dust Bag
- Open the top cover.
- Remove and dispose of the used dust bag.
- Install a new one with the small hole facing up.
Reminder:
- Damaged bags can impair performance and damage the station. Check regularly.
- Check the metal filter at the inside bottom of the station in case of clogging.
9.8 Clear the Dust Path
If the suction is weakened or blocked:
- Unplug the station.
- Flip it over and unscrew the transparent duct cover.
- Remove debris and reinstall the cover.
10. Battery Care and Activation
For Long-Term Storage
- Charge the robot fully.
- Power it off (hold the power button for 3 seconds).
- Store in a dry, ventilated place. Recharge every 3 months to avoid battery degradation.
Battery Activation (After Deep Discharge or Long Inactivity)
- Align the robot on the charging station.
- Charge it for 3 minutes and then remove it away. Repeat this process 3 times.
- Then charge continuously for 5–6 hours until it is fully charged when the indicator turns off.
11. Troubleshooting
11.1 Voice Alerts & Error Codes
When a malfunction occurs, the robot's indicator light will flash red and a voice alert will play. Use the table below to identify and resolve the issue.
| Voice Alert | Possible Cause | Solution |
|---|---|---|
| Side wheel/ Side brush blocked | Hair or debris is caught | Check and clean side wheels/brushes |
| Please check the cliff sensor/Bumper is stuck | Bumper gets caught or stained/cliff sensors get stained | Clear and clean those components |
| Robot is stuck | Trapped by cords or obstacles | Remove the obstruction |
| Gyroscope initialization failed | Gyroscope failed to position due to robot skidding | Remove and relocate the robot |
11.2 Water Tank / Mopping Issues
| Issue | Possible Cause | Solution |
|---|---|---|
| Water tank leaking | Rubber plug not sealed | Reseal the plug |
| No water output while mopping | The water tank not installed properly or empty | Reinstall or refill the tank |
| Mop cloth falling off | Velcro not attached well or worn out | Secure the mop cloth or replace it |
11.3 Self-Empty Station Issues
| Issue | Possible Cause | Solution |
|---|---|---|
| Station not working | Dust bag not installed properly or clogging happens | Reinstall or replace dust bag, or refer to 5.7 to clear inside filter and dust path |
| Indicator light blink orange but the dust is not emptying | Robot not properly docked | Adjust position to align charging pins |
11.4 App Issues
| Issue | Possible Cause | Solution |
|---|---|---|
| Can't connect to the app | Incorrect router username/password | Re-enter correct Wi-Fi credentials |
| Out of Wi-Fi signal coverage | Move the robot closer to the router | |
| Robot not in pairing mode | Hold the power button for 6 seconds until "WiFi pairing" prompt is heard | |
| Incompatible network type | Only supports 2.4GHz or mixed 2.4/5GHz networks, not 5GHz-only | |
| Wrong app installed | Use the QR code or app store to download ILIFE Clean app | |
| Map not generated | The robot does not start cleaning from station | Start cleaning from charging station |
| Robot was moved during cleaning | Avoid moving the robot in mid of cleaning | |
| Task has not completed | Let robot finish the cleaning session and return to the station automatically. |
11.5 Robot Issues
| Issue | Possible Cause | Solution |
|---|---|---|
| Can't return to the station | Improper station placement or power loss | Please refer to 2.2 on how to place the station correctly |
| The robot does not start cleaning from station | Suggest to start from station | |
| Obstructed return path (e.g., door closed) | Keep the return path clear | |
| Robot returns before finishing | Battery gets low in large areas | Enable "Auto Resume" feature in the app |
| Cleaning coverage may be poor due to complex home layout. | Tidy the environment for better navigation | |
| Can't charge | Charging pins not aligned or dirty | Adjust position and clean pins |
| The station is not powered | Ensure the station is plugged into a power supply. | |
| Battery over-discharged from long storage | Manually charge 3 times for 3 mins each, then full charge for 5-6 hours | |
| Loud noise during operation | Brushes or dustbin clogged; in high suction mode | Clean components or switch to standard mode |
| Frequently gets stuck | Tangled in wires/ carpet fringe or get stuck under low furniture | Tidy up or use virtual walls in app |
| Climbing ability is weakened with mop installed | Remove the mop bracket, or assist robot over high thresholds if needed | |
| Skipped or repeated cleaning areas | The floor is too much cluttered | Tidy up the cables, shoes |
| The robot can not navigate correctly due to wheel is skidding in failure to climb the threshold, or on a slippery floor | Close doors to problematic rooms to avoid threshold, avoid waxed floors | |
| Top LiDAR does not work due to dust or foreign objects caught on sensor | Clean the LiDAR with soft cloth | |
If the issue persists:
- Press and hold the power button for 3 seconds to turn off, then press for 2 seconds to restart.
- If still unresolved, please contact customer support.
12. Safety Information
Important Safety Instructions
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Remove hazards such as power cords, small items, or loose objects from the floor before cleaning.
- Fold carpet tassels under the rug and lift hanging curtains or tablecloths off the floor.
- For staircases or elevated areas, test whether the robot detects edges. Use barriers if necessary.
- Use only manufacturer-recommended accessories and original rechargeable battery and charging dock.
- Ensure the voltage matches the specifications on the charging dock.
- This device is for indoor home use only. Do not use outdoors or in commercial environments.
- Do not use water to rinse the device or wipe it with a wet cloth.
- Do not operate the robot on wet or flooded surfaces.
- Do not use near open flames or fragile items.
- Keep hair, fingers, and loose clothing away from moving parts and openings.
- Do not vacuum hard, sharp, flammable, or burning objects.
- Do not use a damaged charging dock or power cord.
- Keep the power cord away from heat sources and do not allow the robot to run over it.
- If the power cord is damaged, have it replaced by a qualified technician.
- Ensure the dustbin and filter are installed correctly before use.
- Do not operate in a room where an infant is sleeping.
- Stop using the device if it has been dropped, damaged, exposed to water, or used outdoors. Contact customer service.
Danger – Critical Safety Warnings
- Disconnect the product from power if not used for a long period.
- Remove the battery before cleaning or performing maintenance.
- Always unplug the charging adapter before maintenance.
- Warning: Non-rechargeable batteries must not be recharged.
- Only qualified personnel may replace the battery.
- Use only the provided auto-empty station (Model: P200) for recharging.
- Do not power the device via external switches or circuits controlled by utility services.
- If the power cord is damaged, it must be replaced by the manufacturer or authorized agent.
- Maintain at least 20 cm distance between the antenna and your body during operation.
- Frequency bands: Bluetooth 2402–2480 MHz; Wi-Fi 2412–2472 MHz.
- Maximum RF transmission power: Bluetooth <10 dBm (EIRP), Wi-Fi <20 dBm (EIRP).
- Before discarding the product, power it off and remove the battery.
- Dispose of batteries according to local regulations.
- Do not incinerate the product or battery even if damaged.
- Use the product only as described in this manual. ILIFE is not responsible for loss or injury from misuse.
- Not suitable for high-pile carpets or certain dark-colored carpets.
CLASS 1 CONSUMER LASER PRODUCT (Robot)
- Laser model: VP100L
- Invisible laser radiation
- Laser energy: Exposure near aperture may cause burns
- Wavelength: 905nm
- Output power: 1.5w
- Frequency: 1MHz
- Pulse duration: 1.5ns
- Laser of vacuum cleaner complies with the standard for Class 1 laser products of EN 50689:2021 & EN 60825-1:2014+A11:2021
CLASS 1 CONSUMER LASER PRODUCT (Self-Empty Station)
- Laser model: D3A3
- Invisible laser radiation
- Laser energy: Exposure near aperture may cause burns
- Wavelength: 940nm
- Output power: 6mW
- Frequency: Steady on
- Laser of vacuum cleaner complies with the standard for Class 1 laser products of EN 50689:2021 & EN 60825-1:2014+A11:2021
13. User Tips
- App Connection: Ensure your Wi-Fi network is on the 2.4 GHz band for successful app pairing. If you experience issues, try restarting the robot and phone, and ensure the robot is close to the router.
- Mopping: For best results, use purified water at room temperature in the water tank. Avoid using hot water or chemical cleaning agents directly in the tank to prevent damage or clogging. If using cleaning solutions, apply them to the mop cloth directly.
- Noise: The robot can be noisy, especially during the self-emptying process due to its powerful suction. Consider scheduling cleaning during times when noise is less disruptive.
- Carpet Cleaning: The A30 Pro is designed to handle carpets and will boost suction automatically. However, it's not suitable for high-pile carpets.
- Maintenance: Regularly check and clean the main brush, side brush, and wheels for entangled hair or debris to maintain optimal performance and prevent unusual noises. The high-efficiency filter is not washable; replace it as recommended.
- Charging Station Placement: Place the charging station against a wall with at least 0.5 meters clear space on each side and 1.5 meters in front to ensure the robot can dock properly. Avoid areas with strong signal interference (e.g., routers, TVs) or reflective surfaces (e.g., mirrors, windows).
14. Frequently Asked Questions (FAQ)
- Q: Can not find the charging station?
A: Ensure the charging station is placed against the wall, with 0.5 meters clear space on each side and 1.5 meters clear space in front. Keep it away from signal interference sources like routers, TVs, mirrors, or windows. - Q: The robot moves in circles in one direction.
A: The wheels may be blocked with hair or debris. Clean them thoroughly using the provided tools. If the issue persists, contact customer service. - Q: The robot is working with loud noise.
A: 1. Check the main brush and side brush for entangled foreign matter and clean them if necessary. 2. Clean the filter of the dust box (note: the high-efficiency filter cannot be washed with water). 3. If the main brush and side brush are not installed, run the machine to see if there is any abnormal sound. If not, the sound from the brushes is normal. 4. If the sound is too harsh or exceeds 70 decibels, record a video and send it to technical support. - Q: What is the warranty for this product?
A: As an ILIFE authorized store, we guarantee that all products are brand new and original. We provide official after-sales service for our products (excluding consumables) for a period of 2 years. We also have repair and after-sales centers worldwide. In case of issues, you can send it to a repair center for free service, or we can send necessary parts with instructions for self-installation.
15. Warranty and Support
ILIFE provides a 2-year limited warranty for this product (excluding consumable accessories). All products purchased from an ILIFE Authorized Store are 100% genuine and brand new.
ILIFE operates authorized after-sales service centers in Germany, and Russia for fast and reliable support. If your product requires service during the warranty period, you can send it to an authorized service center for repair. When applicable, we may also provide replacement parts free of charge with detailed installation guidance for easy replacement.
For further assistance, please contact customer service at warranty_repair_EU@iliferobot.com or visit www.iliferobot.com.
For more detailed information, please refer to the User Manual (PDF).