ILIFE A12 Pro

Contents

ILIFE A12 Pro Robot Vacuum and Mop Combo User Manual

1. Introduction

Dear Customer,

Thank you for purchasing the ILIFE A12 Pro Robotic Vacuum Cleaner! You've joined the millions of people cleaning with robots - the smartest way to do it.

Please take a few moments to read through this manual and familiarize yourself with your robot to achieve the best performance. If you encounter any issues with your robot, feel free to contact our customer service or visit our website at www.iliferobot.com for further assistance.

Enjoy comprehensive cleaning every day! Best regards, ILIFE Innovation

2. What's in the Box

The ILIFE A12 Pro package includes the following components:

Video: Unboxing the ILIFE A12 Pro Robot Vacuum and Mop Combo, showing all included accessories.

All components of the ILIFE A12 Pro package

Image: All components included in the ILIFE A12 Pro package, laid out for inspection.

  • Robot Vacuum
  • Self-Empty Station
  • Dust Bags (x5)
  • Mop Cloth Bracket Assembly
  • Extra Side Brush (x2)
  • Remote Control
  • High Performance Filter
  • User Manual
  • AAA Battery (x2)

Note: Product illustrations in this manual are for reference only. Due to updates and improvements, actual products may differ slightly from illustrations.

3. Technical Specifications

Robot

SpecificationDetails
ModelA12 Pro
Dimensions315 x 315 x 93 mm
Battery TypeLi-ion
Charging Time< 300 minutes
Dustbin Capacity0.2 L
Water Tank Capacity0.2 L
Net Weight2.4 kg
Power (W)40w
Voltage14.4 V
Filter TypeHEPA
Cleaning RoutePlanned Type
FunctionMopping & Sweeping & Suction Type
Number of operating modes3-4
Timing ReservationYes
Remote ControlYes
InstallationRobot
Dust Storage TypePaper Dust Bag
Bag Or BaglessWith Bag
Cord Length (m)WireLess
LCDNo
Handle MaterialOthers
Certificationce
OriginMainland China

Self-Empty Station

SpecificationDetails
Dimensions285 × 145 × 253 mm
Rated Input220V-240V ~ 50/60 Hz
Rated Output19V = 0.6A
Dust Bag Capacity2.5 L
Net Weight2.0 kg

Note: Specifications are subject to change without notice as we continuously improve our products.

4. Product Overview

Robot Components

Top view of the ILIFE A12 Pro Robot Vacuum

Image: Top view of the ILIFE A12 Pro Robot Vacuum, highlighting the Obstacle Sensor, Start/Pause Button, and LiDAR Sensor.

  • Obstacle Sensor
  • Start/Pause Button
  • LiDAR Sensor
Bottom view of the ILIFE A12 Pro Robot Vacuum

Image: Bottom view of the ILIFE A12 Pro Robot Vacuum, showing Cliff Sensors, Side Brushes, Side Wheels, Nose Wheel, Battery Compartment, Suck Passage, and the 2-in-1 Dustbin & Water Tank.

  • Cliff Sensors
  • Side Brushes
  • Side Wheels
  • Nose Wheel
  • Battery Compartment
  • Suck Passage
  • 2-in-1 Dustbin & Water Tank
Side view of the ILIFE A12 Pro Robot Vacuum

Image: Side view of the ILIFE A12 Pro Robot Vacuum, indicating the Charging Pins and Water Tank Release Button.

  • Charging Pins
  • Water Tank Release Button

Water Tank Assembly

Diagram of the Water Tank Assembly

Image: Diagram illustrating the components of the Water Tank Assembly, including Primary Filter, High Performance Filter, Water Inlet Plug, Dust Outlet, Mop Bracket, and Mop Cloth.

  • Primary Filter
  • High Performance Filter
  • Water Inlet Plug
  • Dust Outlet
  • Mop Bracket
  • Mop Cloth

Self-Empty Station Components

Diagram of the Self-Empty Station Components

Image: Diagram showing the components of the Self-Empty Station, such as Top Cover, Status Indicator Light, Dust Inlet, Dust Bag, Charging Pins, and Lens Sensor.

  • Top Cover
  • Status Indicator Light
  • Dust Inlet
  • Dust Bag
  • Charging Pins
  • Lens Sensor

Remote Control Guide

Before using the remote, insert two AAA/R03 batteries. Remove the batteries if not used for a long time.

Diagram of the ILIFE A12 Pro Remote Control

Image: Diagram of the ILIFE A12 Pro Remote Control with labeled buttons.

ButtonFunction
PowerWake the robot from sleep / Start or pause cleaning
DirectionIn standby mode: Forward, Left, Right (Not functional during running)
SuctionSwitch Suction Level by Each Press: Standard → Strong → Max → Silent → Standard
Path ModeStarts standard zigzag cleaning across the entire area
Edge ModeCleans along walls and furniture edges
Spot ModeDeeply cleans a 1.5m × 1.5m area in a spiral pattern
HomeSend the robot back to the charging dock manually

Note: The robot can only respond to the remote control within 3 meters horizontal distance.

5. Getting Started

Important Pre-Cleaning Notes

Daily Use Encouraged: Frequent use helps the robot learn your home layout for more efficient path planning and reduced missed spots.

Follow these guidelines before each use to protect your home and maximize the robot's cleaning efficiency:

  • Remove loose items from the floor: Clear cables, clothing, or small objects that could get tangled in the wheels or brushes.Robot avoiding tangled cables

    Image: Robot vacuum encountering loose cables on the floor, illustrating the need to clear such items.

  • Fold the rug's tassel trim underneath: Prevent tangling during cleaning. Avoid using on high-pile or thick rugs (>18mm or 0.71").Robot on a rug with folded tassels

    Image: Robot vacuum on a rug, demonstrating how to fold rug tassels underneath to prevent tangling.

  • Block off dangerous zones: For areas like fireplaces, vents, or staircases, place physical barriers or set “No-Go Zones" in the app.Robot approaching a staircase

    Image: Robot vacuum approaching a staircase, emphasizing the need for physical barriers or No-Go Zones.

  • Avoid use on floor with excessive water: Avoid vacuuming large amounts of water as it will potentially damage the robot.
  • Obstacle height limit: The robot can climb over thresholds up to 20mm (0.79").Robot navigating a threshold

    Image: Robot vacuum navigating a small threshold, illustrating its climbing capability.

  • Cliff sensor limitations: Although the robot includes anti-drop sensors, performance may decrease on dark carpets or reflective surfaces, or in the situation the sensors get stained. Use physical barriers as needed.Robot on a dark carpet near a cliff

    Image: Robot vacuum on a dark carpet near a drop-off, highlighting potential cliff sensor limitations on certain surfaces.

Installing and Using the Self-Empty Station

Placement Guidelines:

  • Place the station on a hard, flat surface against a wall.
  • Ensure there are no obstacles within 1.5 meters in front and 0.5 meters on both sides.
  • Avoid placing it in areas with strong sunlight or reflective surfaces.
  • Keep it away from places where pets sleep to avoid noise disturbance.
Self-Empty Station placement diagram

Image: Diagram illustrating the recommended placement of the Self-Empty Station, showing clearance requirements.

Power Connection: Plug in the power cable. Once powered, the station's indicator light will turn on.

Dust Bag Installation:

  1. Open the top cover of the station.
  2. Insert the dust bag with the small hole facing up and press it into place firmly.
  3. Close the cover. The green light will begin blinking slowly, indicating standby mode.
Self-Empty Station dust bag installation steps

Image: Diagrams showing the steps to install the dust bag in the Self-Empty Station.

How Self-Emptying Works:

Once the robot returns to the station and the charging pins align for 3 seconds, the station automatically starts dust collection. The inside fan motor runs for about 15 seconds, indicated by a blinking orange light, and the station is back to standby mode after finished.

Robot returning to self-empty station

Image: Robot vacuum returning to the Self-Empty Station, illustrating the automatic dust collection process.

Charging the Robot

Charging Steps:

  • Proper Placement: Align the robot with the charging pins on the station. When connected properly, the robot's orange charging light will blink slowly, indicating it is charging.Robot charging on the self-empty station

    Image: Robot vacuum properly docked and charging on the Self-Empty Station.

  • Charging Completes: When all indicator lights turn off, the battery is fully charged.

Tip: Recharge the robot after each use to extend battery life.

Important Notes:

  • In Daily Use:
    1. Make sure the charging pins on the robot and station remain clean to avoid poor contact.
    2. Store the robot on the station with the station powered on.
  • When Not in Use: For long-term storage, fully charge the robot, turn it off (press and hold power for 3 seconds), and store it in a dry, ventilated place.

Installing and Using the Water Tank & Mop

Installation Steps:

  • Remove the Water Tank: Press the water tank's release button and pull the tank backward to remove it.Removing the water tank from the robot

    Image: Diagram showing how to remove the water tank from the robot vacuum.

  • Fill the Water Tank: Open the rubber plug on the tank and fill with clean water. Tip: Use purified water to reduce limescale buildup. Reseal the plug tightly to prevent leakage.Filling the water tank

    Image: Diagram illustrating the process of filling the water tank.

  • Attach the Mop Cloth: Smooth the mop cloth onto the bracket and use velcro to secure it. Align the bracket with the bottom of the tank and slide it in until it clicks into place.Attaching the mop cloth to the bracket

    Image: Diagram showing how to attach the mop cloth to the mop bracket.

  • Start Mopping: Reinstall the tank into the robot. The robot will automatically detect the mop and switch to mop mode.Robot with mop cloth attached, ready for mopping

    Image: Robot vacuum with the mop cloth attached and water tank installed, ready to begin mopping.

Important Notes:

  • Where Not to Use Mopping Mode:
    • Do not use the mop on carpets. For best practice, zone out the carpet on app while mopping.
    • Do not use hot water or cleaning agents (it may damage or clog the tank).
  • Maintenance Tips:
    1. Monitor water levels during mopping; refill when low.
    2. Leakage could happen if the filled water tank is tilted. Leveling the water tank to avoid leaking.
    3. After mopping, remove the mop and wash/dry it to avoid mildew or odors.

6. Using the ILIFE Clean App

To access all features, it's recommended to control the robot through the ILIFE Clean App.

Network Compatibility: Supports 2.4GHz or dual-band 2.4GHz/5GHz networks. Does not support 5GHz-only networks.

Downloading the App

Scan the QR code or search for “ILIFE Clean” in your app store.

QR code for ILIFE Clean App download

Image: QR code for downloading the ILIFE Clean App.

Open the app and sign up or log in with your credentials.

ILIFE Clean App login/registration screen

Image: Screenshot of the ILIFE Clean App login and registration screen.

Wi-Fi Pairing Modes

Enable Pairing Mode: Press and hold the AUTO button on the robot for 5 seconds. You'll hear "WiFi pairing started" and the Wi-Fi light will start blinking slowly.

Robot with Wi-Fi light blinking for pairing

Image: Robot vacuum with its Wi-Fi indicator light blinking, signaling it is in pairing mode.

Bluetooth Pairing Mode:

  1. Go to your phone's settings, turn on Bluetooth and enable Bluetooth permission for ILIFE Clean app.
  2. Return to the ILIFE Clean app — the device will appear automatically and tap "Add" to begin.
  3. Select your 2.4GHz Wi-Fi network and enter the password to go next.
  4. The device starts downloading.
  5. Device is added successfully and done.
ILIFE Clean App Bluetooth pairing steps

Image: Series of screenshots from the ILIFE Clean App demonstrating the Bluetooth pairing process.

AP (Access Point) Pairing Mode:

  1. In the app, choose your specific robot model.
  2. Choose your 2.4GHz Wi-Fi network and enter the password.
  3. Go to your phone's Wi-Fi settings and connect to a network that starts with "SmartLife". Return to the app once connected.
  4. Wait for the app to complete the device connection process.
ILIFE Clean App AP pairing steps

Image: Series of screenshots from the ILIFE Clean App demonstrating the AP (Access Point) pairing process.

Map Management

How to Access: Open the ILIFE Clean app → Tap “Settings" → Select "Manage Map"

ILIFE Clean App Map Management screen

Image: Screenshot of the ILIFE Clean App's Map Management screen.

Available Functions:

  • Create/Switch Maps: Perfect for multi-floor homes (up to 5 maps supported).
  • Reset/Delete Maps: Delete or reset a saved map.

Setting No-Go and No-Mop Zones

Tip: It's recommended to complete a full-home mapping before setting restricted zones.

Zone Types:

  • No-Go Zone: Robot avoids both vacuuming and mopping in this area.
  • No-Mop Zone: Robot vacuums but does not mop in this area.
  • Virtual Wall: Acts as an invisible barrier the robot won't cross.

How to Set Zones:

  1. Go to "Forbidden Edit" in the app.
  2. Tap set restricted areas.
  3. Draw your desired zone and select the type.
  4. Save "Settings".
ILIFE Clean App No-Go and No-Mop Zones setting screens

Image: Screenshots from the ILIFE Clean App showing how to set No-Go and No-Mop Zones.

Note: These features are for convenience and do not replace physical barriers in high-risk areas like staircases.

Scheduled Cleaning

Before You Start: Ensure the charging station remains powered on. The robot should have sufficient battery charge.

How to Schedule:

  1. Open the ILIFE Clean app.
  2. Go to Scheduled Cleaning.
  3. Set the desired time and recurrence (e.g., daily or weekly).
  4. Choose your preferred cleaning mode.
  5. Confirm your settings.
ILIFE Clean App Scheduled Cleaning screens

Image: Screenshots from the ILIFE Clean App showing the interface for setting up scheduled cleanings.

After Scheduling:

  1. The robot will start cleaning automatically at the scheduled time.
  2. After cleaning, it will return to the charging station.

Selecting Cleaning Modes

Start / Pause Cleaning:

  • In the App: Tap the “Start/Pause" button.
  • On the Robot: Press the power button once to start or pause cleaning.

Tip: It's recommended to create a full-house map before using room-by-room or zone cleaning.

Smart Cleaning Mode:

  1. Tap “Start” in the app.
  2. The robot will leave the station and automatically plan a cleaning route.
  3. It will return to the station when cleaning is complete.
ILIFE Clean App Smart Cleaning Mode screen

Image: Screenshot of the ILIFE Clean App showing the Smart Cleaning Mode interface.

Room Cleaning Mode: Select specific room in the app for targeted cleaning.

ILIFE Clean App Room Cleaning Mode screen

Image: Screenshot of the ILIFE Clean App showing the Room Cleaning Mode interface.

Note: You can customize suction power, water volume, and cleaning sequence per room.

Zone Cleaning Mode:

  1. Draw a rectangular zone on the map in the app.
  2. Set the size and number of cleaning passes (e.g., clean 2x).
  3. The robot will clean that area and return to the station.
ILIFE Clean App Zone Cleaning Mode screen

Image: Screenshot of the ILIFE Clean App showing the Zone Cleaning Mode interface.

Spot Cleaning Mode:

  1. For localized messes like pet food or snack spills.
  2. Tap the target spot on the map.
  3. The robot will deep-clean a 1.5m × 1.5m area in a spiral pattern, then return to base.
ILIFE Clean App Spot Cleaning Mode screen

Image: Screenshot of the ILIFE Clean App showing the Spot Cleaning Mode interface.

Do Not Disturb Mode:

  • Ideal for nighttime or rest hours. In the app: Go to "Settings” → “Robot Settings" → Do Not Disturb.
  • Once enabled, the robot will:
    1. Pause auto-charge and auto-resume cleaning.
    2. Stop self-emptying automatically.
    3. Shut down voice prompts.
ILIFE Clean App Do Not Disturb Mode screen

Image: Screenshot of the ILIFE Clean App showing the Do Not Disturb Mode settings.

Dust Collection Frequency

Adjust in the app via: "Settings" → "Dust collection" → Frequency e.g. Collect dust after each sweep; Collect dust after two sweeps, etc.

ILIFE Clean App Dust Collection Frequency screen

Image: Screenshot of the ILIFE Clean App showing options for setting dust collection frequency.

Note: If the robot returns but fails to start self-emptying automatically, it might be because the last cleaning task was less than 5 minutes.

Cleaning Plan Customization

  • Suction & Water Level Adjustment: In the app via: “Cleaning Plan" → Adjust suction power (Silent / Standard / Strong / Max) and water flow (Low / Medium / High).ILIFE Clean App Suction & Water Level Adjustment screen

    Image: Screenshot of the ILIFE Clean App showing settings for suction power and water level adjustment.

  • Per-Room Customization: In the app via: “Cleaning Plan" → "Plan 1 / Plan 2” Set specific suction, water flow, number of passes, and cleaning sequence for each room.ILIFE Clean App Per-Room Customization screen

    Image: Screenshot of the ILIFE Clean App showing options for per-room cleaning customization.

7. Voice Assistant Setup (Alexa/Google Assistant)

Before setting up, please make sure:

  1. A12 Pro is fully charged and connected to ILIFE Clean app.
  2. You own a supported voice assistant device (e.g., Amazon Echo, Google Nest). These devices are sold separately.
  3. Alexa or Google Home app is installed on your mobile device.
  4. You have an active account for your voice assistant.

Alexa Setup

  1. Connect your robot to the ILIFE Clean app.
  2. Open the Alexa app → Tap Skills & Games → Search Smart Life.
  3. Tap "Enable to Use”.
  4. Enter your ILIFE Clean account credentials and authorize access.
  5. Tap "Authorize".
  6. Alexa will search and link your robot automatically.
Alexa Setup steps for ILIFE A12 Pro

Image: Series of screenshots guiding through the Alexa setup process for the ILIFE A12 Pro.

8. Cleaning & Maintenance

Always turn off the robot and unplug the power adapter before performing maintenance.

ComponentClean FrequencyReplace Frequency
Mop ClothAs neededEvery 3-6 months
DustbinWeeklyN/A
FilterN/AEvery 1-1.5 months
Side BrushWeeklyEvery 3-6 months (or if damaged)
Roller BrushWeeklyEvery 6 months
Side WheelsMonthlyN/A
Cliff SensorsMonthlyN/A
Charging ContactsMonthlyN/A
Disposable Dust BagN/AEvery 1-1.5 months (or if damaged)

Cleaning the Dustbin & Filter

  1. Press the release button to remove the 2-in-1 dustbin.
  2. Open the dustbin lid.
  3. Empty the dustbin.
  4. Remove the filters and rinse the dustbin with water.
  5. Dry thoroughly with a clean cloth.
  6. Replace the filter if necessary and reinsert the dustbin.

Note: The filter is unwashable.

Dustbin and filter cleaning steps

Image: Diagrams illustrating the steps for cleaning the dustbin and filter.

Cleaning the Water Tank and Mop Cloth

Mop Cloth:

  1. Remove the mop bracket and peel off the cloth.
  2. Rinse with clean water and let it air-dry completely.
Mop cloth cleaning steps

Image: Diagrams showing how to remove and clean the mop cloth.

2-in-1 Water Tank:

  1. Open the rubber plug and drain any leftover water.
  2. Wipe the tank clean and let it dry thoroughly.
Water tank cleaning steps

Image: Diagrams illustrating the steps for cleaning the water tank.

Cleaning the Side Brushes and Side Wheels

Side Brushes: Unscrew and remove the brushes. Clear hair or debris wrapped around them.

Side brush cleaning diagram

Image: Diagram showing how to clean the side brushes.

Side Wheels: Check and remove any obstructions caught in the wheels.

Side wheel cleaning diagram

Image: Diagram showing how to clean the side wheels.

Cleaning the Sensors and Charging Pins

Cliff Sensors: Use a soft brush to gently clean the sensors on the underside of the robot.

Cliff sensor cleaning diagram

Image: Diagram showing how to clean the cliff sensors.

Charging Pins: Wipe both the robot's and station's charging pins with a dry cloth to maintain charging efficiency.

Charging pin cleaning diagram

Image: Diagram showing how to clean the charging pins on both the robot and the station.

Replacing the Dust Bag and Cleaning the Station

Replace Dust Bag:

  1. Open the top cover.
  2. Remove and dispose of the used dust bag.
  3. Install a new one with the small hole facing up.
Dust bag replacement steps

Image: Diagrams illustrating the steps for replacing the dust bag in the Self-Empty Station.

Reminder:

  • Damaged bags can impair performance and damage the station. Check regularly.
  • Check the metal filter at the inside bottom of the station in case of clogging.

Clear the Dust Path: If the suction is weakened or blocked:

  1. Unplug the station.
  2. Flip it over and unscrew the transparent duct cover.
  3. Remove debris and reinstall the cover.
Clear dust path diagram

Image: Diagram showing the transparent duct cover and dust path for clearing blockages.

Battery Care and Activation

For Long-Term Storage:

  1. Charge the robot fully.
  2. Power it off (hold the power button for 3 seconds).
  3. Store in a dry, ventilated place. Recharge every 3 months to avoid battery degradation.

Battery Activation (After Deep Discharge or Long Inactivity):

  1. Align the robot on the charging station.
  2. Charge it for 3 minutes and then remove it. Repeat this process 3 times.
  3. Then charge continuously for 5–6 hours until it is fully charged when the indicator turns off.

9. Troubleshooting

When a malfunction occurs, the robot's indicator light will flash red and a voice alert will play. Use the tables below to identify and resolve the issue.

Voice Alerts & Error Codes

Voice AlertPossible CauseSolution
Side wheel/Side brush blockedHair or debris is caughtCheck and clean side wheels/brushes
Please check the cliff sensor/Bumper is stuckBumper gets caught or stained/cliff sensors get stainedClear and clean those components
Robot is stuckTrapped by cords or obstaclesRemove the obstruction
Gyroscope initialization failedGyroscope failed to position due to robot skiddingRemove and relocate the robot

Water Tank / Mopping Issues

IssuePossible CauseSolution
Water tank leakingRubber plug not sealedReseal the plug
No water output while moppingThe water tank not installed properly or emptyReinstall or refill the tank
Mop cloth falling offVelcro not attached well or worn outSecure the mop cloth or replace it

Self-Empty Station Issues

IssuePossible CauseSolution
Station not workingDust bag not installed properly or clogging happensReinstall or replace dust bag, or refer to 5.6 to clear inside filter and dust path
Indicator light blink orange but the dust is not emptyingRobot not properly dockedAdjust position to align charging pins

App Issues

IssuePossible CauseSolution
Can't connect to the app
  • Incorrect router username/password
  • Out of Wi-Fi signal coverage
  • Robot not in pairing mode
  • Incompatible network type
  • Wrong app installed
  • Re-enter correct Wi-Fi credentials
  • Move the robot closer to the router
  • Hold the power button for 6 seconds until "WiFi pairing" prompt is heard
  • Only supports 2.4GHz or mixed 2.4/5GHz networks, not 5GHz-only
  • Use the QR code or app store to download ILIFE Clean app
Map not generated
  • The robot does not start cleaning from station
  • Robot was moved during cleaning
  • Task has not completed
  • Start cleaning from charging station
  • Avoid moving the robot in mid of cleaning
  • Let robot finish the cleaning session and return to the station automatically.

Robot Issues

IssuePossible CauseSolution
Can't return to the station
  • Improper station placement or power loss
  • The robot does not start cleaning from station
  • Obstructed return path (e.g., door closed)
  • Please refer to 2.2 on how to place the station correctly
  • Suggest to start from station
  • Keep the return path clear
Robot returns before finishing
  • Battery gets low in large areas
  • Cleaning coverage may be poor due to complex home layout.
  • Enable "Auto Resume" feature in the app
  • Tidy the environment for better navigation
Can't charge
  • Charging pins not aligned or dirty
  • The station is not powered
  • Battery over-discharged from long storage
  • Adjust position and clean pins
  • Ensure the station is plugged into a power supply.
  • Manually charge 3 times for 3 mins each, then full charge for 5-6 hours
Loud noise during operationBrushes or dustbin clogged; in high suction modeClean components or switch to standard mode
Frequently gets stuck
  • Tangled in wires/carpet fringe or get stuck under low furniture
  • Climbing ability is weakened with mop installed
  • Tidy up or use virtual walls in app
  • Remove the mop bracket, or assist robot over high thresholds if needed
Skipped or repeated cleaning areas
  • The floor is too much cluttered
  • The robot can not navigate correctly due to wheel is skidding in failure to climb the threshold, or on a slippery floor
  • Top LiDAR does not work due to dust or foreign objects caught on sensor
  • Tidy up the cables, shoes
  • Close doors to problematic rooms to avoid threshold, avoid waxed floors
  • Clean the LiDAR with soft cloth

If the issue persists:

  1. Press and hold the power button for 3 seconds to turn off, then press for 2 seconds to restart.
  2. If still unresolved, please contact customer support.

10. Safety Information

Important Safety Instructions

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  • Remove hazards such as power cords, small items, or loose objects from the floor before cleaning.
  • Fold carpet tassels under the rug and lift hanging curtains or tablecloths off the floor.
  • For staircases or elevated areas, test whether the robot detects edges. Use barriers if necessary.
  • Use only manufacturer-recommended accessories and original rechargeable battery and charging dock.
  • Ensure the voltage matches the specifications on the charging dock.
  • This device is for indoor home use only. Do not use outdoors or in commercial environments.
  • Do not use water to rinse the device or wipe it with a wet cloth.
  • Do not operate the robot on wet or flooded surfaces.
  • Do not use near open flames or fragile items.
  • Keep hair, fingers, and loose clothing away from moving parts and openings.
  • Do not vacuum hard, sharp, flammable, or burning objects.
  • Do not use a damaged charging dock or power cord.
  • Keep the power cord away from heat sources and do not allow the robot to run over it.
  • If the power cord is damaged, have it replaced by a qualified technician.
  • Ensure the dustbin and filter are installed correctly before use.
  • Do not operate in a room where an infant is sleeping.
  • Stop using the device if it has been dropped, damaged, exposed to water, or used outdoors. Contact customer service.

Danger – Critical Safety Warnings

  • Disconnect the product from power if not used for a long period.
  • Remove the battery before cleaning or performing maintenance.
  • Always unplug the charging adapter before maintenance.
  • Warning: Non-rechargeable batteries must not be recharged.
  • Only qualified personnel may replace the battery.
  • Use only the provided auto-empty station (Model: P200) for recharging.
  • Do not power the device via external switches or circuits controlled by utility services.
  • If the power cord is damaged, it must be replaced by the manufacturer or authorized agent.
  • Maintain at least 20 cm distance between the antenna and your body during operation.
  • Frequency bands: Bluetooth 2402–2480 MHz; Wi-Fi 2412–2472 MHz.
  • Maximum RF transmission power: Bluetooth <10 dBm (EIRP), Wi-Fi <20 dBm (EIRP).
  • Before discarding the product, power it off and remove the battery.
  • Dispose of batteries according to local regulations.
  • Do not incinerate the product or battery even if damaged.
  • Use the product only as described in this manual. ILIFE is not responsible for loss or injury from misuse.
  • Not suitable for high-pile carpets or certain dark-colored carpets.

CLASS 1 CONSUMER LASER PRODUCT

Laser model: VP100L
Invisible laser radiation
Laser energy
Exposure near aperture may cause burns
Wavelength: 905nm
Output power: 1.5w
Frequency: 1MHz
Pulse duration: 1.5ns
Laser of vacuum cleaner complies with the standard for Class 1 laser products of EN 50689:2021 & EN 60825-1:2014+A11:2021

Laser model: D3A3
Invisible laser radiation
Laser energy
Exposure near aperture may cause burns
Wavelength: 940nm
Output power: 6mW
Frequency: Steady on
Laser of vacuum cleaner complies with the standard for Class 1 laser products of EN 50689:2021 & EN 60825-1:2014+A11:2021

11. User Tips

  • App Pairing: If the app pairing process seems unclear, refer to the detailed steps in the manual or try restarting the robot and app.
  • Coverage: The robot is efficient for areas around 45m², with the water tank capacity typically sufficient for one cleaning cycle of this size.
  • Obstacle Navigation: The robot can easily pass over foam mats and floor slats at doors, making it suitable for homes with various floor transitions.
  • Self-Emptying Noise: Be aware that the self-emptying station produces a loud noise, similar to a regular vacuum cleaner, during the dust collection process.
  • Pet-Friendly Design: The absence of a central brush helps prevent pet hair from tangling, reducing maintenance for pet owners.
  • Filter Maintenance: Regularly check and clean the dustbin filter to prevent blockages and maintain optimal suction. Replace the filter every 1-1.5 months.
  • Nose Wheel & Side Brush Cleaning: If the robot cleans in small areas or side brushes rotate slowly, check and clean the nose wheel and side brushes for any obstructions.

12. Warranty & Support

Warranty: The product comes with a 2-year warranty.

Customer Service: For further assistance or warranty inquiries, please contact:

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.