Introduction
The Trimui Smart Pro S TG5050 is a powerful and portable handheld game console designed for an immersive gaming experience on the go. Featuring an Allwinner A523 Octa-core processor, a vibrant 4.96-inch IPS display, and a 5000mAh battery, it offers robust performance for a wide range of games. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

Figure 1: Trimui Smart Pro S Handheld Game Console
What's in the Box
Upon unboxing your Trimui Smart Pro S, please ensure all the following items are present:
- Trimui Smart Pro S Game Console x1
- USB Charging Cable x1
- User Manual x1
- Packing Box x1

Figure 2: Package Contents
Product Overview
The Trimui Smart Pro S features a thoughtful design with intuitive controls and essential ports for a seamless gaming experience. Familiarize yourself with the layout:

Figure 3: Console Layout (Red Model)
Controls and Ports:

Figure 4: Control and Port Diagram
- D-pad: Directional Pad (up/down/left/right)
- L Joystick / R Joystick: Analog joysticks (TMR Dual Hall joystick, supports pressing for L3/R3 functions)
- Buttons: A, B, X, Y
- Shoulder Buttons: L1, L2, R1, R2 (Larger triggers for better control)
- System Buttons: Menu, Select, Start, Home
- Power Button: For turning the device on/off.
- Reset Button: For system reset.
- Volume Buttons: Vol- (Volume Down), Vol+ (Volume Up)
- Custom FN DIP Switch: For additional function customization.
- Charging Port: Bottom Type-C (5V/2A charging, also supports OTG function).
- USB Host: Top Type-C port.
- TF Card Slot: For expandable storage (up to 1TB).
- Earphone Jack: 3.5mm headphone jack.
- Microphone: Built-in mono microphone.
- Speakers: Built-in stereo speakers (1W) x 2.
- LED Indicator: Middle LOGO charging indicator light.
- Ambient LED: RGB dual Joystick ambient light.
Setup Instructions
1. Initial Charging
Before first use, fully charge your Trimui Smart Pro S. The device is equipped with a 5000 mAh Li-polymer battery, 3.7V, offering approximately 6 hours of battery life. Use the provided USB Type-C cable and a 5V/2A charger for optimal charging. The middle LOGO will act as a charging indicator light.
2. Inserting a TF Card (Optional)
The device supports TF card expansion up to 1TB. If you have purchased a console without a pre-installed card or wish to expand storage, insert a FAT32 formatted TF card into the designated slot.
3. Powering On/Off
- To Power On: Press and hold the Power button until the screen lights up.
- To Power Off: Press and hold the Power button until the power-off options appear on the screen, then select 'Power Off'. Alternatively, press and hold the Power button until the light goes out for a complete shutdown.
Operating Instructions
1. Navigation
Use the D-pad or the L/R Joysticks to navigate through menus and game selections. The A, B, X, Y buttons are used for selection and actions within games, while Select, Start, Menu, and Home buttons provide system-level controls.
2. Playing Games
The Trimui Smart Pro S runs on an Open Source Linux system and is designed to play a wide variety of retro games. Games can be loaded from the internal 8GB eMMC storage or an external TF card. The USB port also supports FAT32 format for USB flash drives.
3. Language Settings
The device supports multiple languages including Japanese, French, German, Italian, Spanish, Portuguese, Russian, English, Polish, Korean, Dutch, Latin American Spanish, Brazilian Portuguese, Simplified Chinese, and Traditional Chinese Style. You can typically change the system language through the device's settings menu.
4. Connecting Peripherals
The top Type-C port functions as a USB Host, allowing connection of compatible USB accessories. The bottom Type-C port supports OTG (On-The-Go) functionality, enabling the device to act as a host for other USB devices.
Video 1: Trimui Smart Pro S product showcase, highlighting features like faster GPU, precise controls, and portability.
Maintenance
1. Cleaning
Use a soft, dry cloth to clean the device. Avoid using liquid cleaners or abrasive materials, as they may damage the screen or casing.
2. Battery Care
- Avoid fully discharging the battery frequently.
- Charge the device regularly, even if not in use, to maintain battery health.
- Do not expose the device to extreme temperatures.
3. Storage
When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
Charging Issues:

Figure 5: Charging Instructions and Troubleshooting
- Situation One: Device has been charging for a long time, but battery level is still 0%.
- Situation Two: Device has been charging for a long time, but the battery level has not increased.
- Situation Three: When the charging cable is plugged in, the charging light does not light up or flickers.
Operation Suggestions for Charging Issues:
- Shut down the device (Press and hold the power button until the light goes out).
- Charge for more than 1-2 hours (a 5V/1A charger is recommended).
Firmware Update:
If you encounter system instability or wish to update the device's software, follow these steps:
- Download the Trimui TG5050 firmware and copy it to the root directory of your SD (TF) card.
- Turn on the device and insert the SD (TF) card.
- Hold down the [Volume-] key and briefly press the [RESET] button.
- Once a green progress bar appears on the screen, release the [Volume-] key. The system will then enter the upgrade mode.
- After the upgrade is completed, the device will automatically restart.
Emulator Specific Issues:
- Mupen64 Emulator Screen Crop: The Mupen64 emulator may crop about 30% of the screen, making it difficult to play. This can often be corrected by pressing the 'X' button within the emulator and choosing an alternative emulator.
Specifications

Figure 6: Trimui Smart Pro S (TG5050) Spec Sheet
| Feature | Description |
|---|---|
| Color | Black / White / Gray / Red / Yellow / Green |
| CPU | Allwinner A523 Octa-core Processor @ 2.0GHz |
| GPU | Arm Mali-G57 MC1 @ 744MHz |
| DRAM | 1GB LPDDR4 |
| Built-in storage | 8GB eMMC |
| External storage | TF card can be expanded up to 1TB. The USB port supports FAT32 format for USB flash drives. |
| Display/Touch | 4.96 inch, 1280x720-pixel, IPS, fully laminated (No Touch Screen) |
| Wireless | WLAN 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz) |
| Bluetooth | BT 5.4 |
| Speaker | Built-in stereo speakers (1W) x 2 |
| Earphone | 3.5mm headphone jack |
| Microphone | Built-in mono microphone |
| Battery | 5000 mAh Li-polymer battery, 3.7V, with 6 hours battery life |
| Charging | USB Type-C interface with 5V/2A charging capability and support for charging while turned off. The USB data transfer is limited to 500mA. |
| LED | Middle LOGO charging indicator light |
| Ambient LED | RGB dual Joystick ambient light |
| Function keys | DPAD(up/down/left/right), A/B/X/Y, Select/Start/Menu/Home, L1/L2/R1/R2, L3/R3(joystick) |
| Other Function key | Power/Volume-/Volume+/Custom FN DIP switch |
| Sockets | 1. Top Type-C: USB Host, 2. Bottom Type-C: USB charging port, OTG function, 3. TF card slot |
| Vibrating motor | Single-channel vibration motor |
| Joystick | Dual Hall joystick |
| System OS | Linux |
| System UI | Trimui UI |
| Language | Chinese / English (and other listed in properties) |
| Material | ABS plastic + glass + electronic components |
| Product Dimensions | Width: 187.4 mm (7.38 inch), Height: 79.8 mm (3.14 inch), Depth: 17.2 mm (0.68 inch) |
| Net weight | 256 g |
User Tips
- PSP Game Performance: Many PSP games run well, often at 2x resolution. For more demanding titles like God of War, 1x resolution might be necessary for smoother gameplay.
- Custom Firmware: While the stock OS works, the hardware is excellent and can be greatly enhanced with custom firmware like SpruceOS for improved performance and features. Note that a fully functioning custom firmware for the 'S' model might still be under development.
- Game Management: You can easily add and delete games by connecting the console to a computer via the USB cable, without needing to remove the SD card.
- SD Card Selection: If purchasing a bundle with a pre-loaded SD card, be aware that the game selection might be subjective or lack certain titles (e.g., DS games). Consider purchasing without an SD card if you prefer to curate your own game library.
- Color Variation: The 'Red' color option may appear as a lighter red or orange in person, rather than a deep red.
- Dreamcast Upscaling: The device is capable of upscaling Dreamcast games, providing an enhanced visual experience.
Warranty and Support
For detailed warranty information and further technical support, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF here.
For any inquiries not covered in this manual, please contact customer support.