ANNKE 3K Security Camera System

Contents

Annke 3K Security Camera System User Manual

Model: 3K Security Camera System

Brand: ANNKE

1. Introduction

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your Annke 3K Security Camera System. Please read this guide thoroughly before using the product to ensure proper functionality and safety.

The Annke 3K Security Camera System offers advanced surveillance capabilities with high-definition video, smart night vision, and intelligent motion detection. It is designed for both indoor and outdoor use, providing reliable security for your property.

2. What's in the Box

The following components are included in your Annke 3K Security Camera System kit:

Contents of the Annke 3K Security Camera System box, including DVR, cameras, power adapters, cables, mouse, user manual, and mounting accessories.
Figure 2.1: What's in the Box
  • 1x DVR (Digital Video Recorder)
  • 4x or 8x Cameras (depending on package)
  • Power Adapters (3x for 4-camera system, more for 8-camera system)
  • 1x USB Mouse
  • 1x HDMI Cable
  • 1x Network Cable
  • BNC Cables (e.g., 8x 60ft BNC Cable)
  • 1-to-4 Splitter Cable (2x)
  • 1x User Manual (this guide)
  • 1x Wall Sticker
  • Screw Bag (e.g., 8x Screw Bag)

3. Product Overview

3.1. DVR (Digital Video Recorder)

The DVR is the central unit for recording and managing video footage from your cameras.

Front Panel

Diagram of the DVR front panel showing Power LED, HDD LED, and Network LED.
Figure 3.1: DVR Front Panel
  • Power LED: Turns yellow when the DVR is powered.
  • HDD LED: Turns red when data is being read from or written to the HDD.
  • Network LED: Turns yellow when the DVR network is connected.

Rear Panel

Diagram of the DVR rear panel showing Video In, HDMI, Audio Out, USB, Power Supply, GND, Network Interface, Audio In, and VGA ports.
Figure 3.2: DVR Rear Panel Ports
  • VIDEO IN: BNC interface for TVI and other analog video inputs.
  • HDMI: HDMI video output connector.
  • AUDIO OUT: RCA connector for audio output.
  • USB Port: USB port for mouse, USB drive, and other additional devices.
  • Power Supply: 12V DC power supply.
  • GND: Ground screw (connect the ground wire before DVR's setup).
  • Network Interface: Connector for network.
  • AUDIO IN: RCA connector for audio input.
  • VGA: VGA video output connector.

3.2. Camera

The cameras capture high-quality video footage with advanced features.

Diagram of the camera showing IP67 Waterproof Housing, 2.8mm HD Lens, Mic, IR LEDs, White Light, Speaker, Mode Switch, Video Output, and Power Port.
Figure 3.3: Camera Components
  • IP67 Waterproof Housing: Ensures durability in various weather conditions.
  • 2.8mm HD Lens: Provides a wide diagonal FOV of 131°.
  • Mic: Built-in microphone for audio capture.
  • IR LEDs: Infrared LEDs for night vision.
  • White Light: Built-in white light for color night vision and deterrence.
  • Speaker: Built-in speaker for two-way audio.
  • Mode Switch: For adjusting camera modes.
  • Video Output: BNC connector for video signal.
  • Power Port: For connecting power adapter.

4. Specifications

4.1. DVR Specifications

CategoryFeatureSpecification
Video & AudioVideo CompressionH.264+/H.264/H.265/H.265 Pro+
Video Input8CH Analog HD/Analog + 2CH IP Video (up to 12 channel when IP enhanced mode on)
Video OutputHDMI and VGA Up to 1080P
Audio Input1-ch RCA, 8-ch via coaxial cable
Audio Output1-ch RCA
Supported Camera TypesSupport HD TVI Input: 3K/5MP@20FPS, 4MP, 3MP, 1080p, 720p; Support AHD Input: 5MP(20FPS)4MP, 1080p, 720P; Support CVI Input: 5MP(20FPS),4MP, 1080p, 720P; Support CVBS Input; Support IP Video Input: 6MP/5MP/4MP/3MP/1080P/720P
Analog HD Playback Resolution3K Lite/5MP Lite/4MP Lite@12fps, 1080p/720p@15fps
IPC Playback ResolutionUp to 6MP
Max Playback Channel8-ch
Network ProtocolsTCP/IP, PPPoE, DHCP, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP™, HTTPS
Total Bandwidth96Mbps
Remote Connection64
Motion Detection 2.0All analog channels support human and vehicle detection to reduce false alarm
Hard DriveHDD1 SATA interface
HDD CapacityUp to 10TB capacity
External InterfaceNetwork interface1, RJ45 10M/100M self-adaptive Ethernet interface
USBUSB2.0x2
GeneralOperating PowerDC12V, ≤ 12W (without HDD)
Working Temperature-14 °F – 131 °F /-10 °C – 55 °C
Dimensions(W x H x D)260 × 222 × 45 mm (10.2 × 8.7 × 1.8 inch)
Weight (without hard disk)≤ 1 kg (2.2 lb) (without HDD)

4.2. Camera Specifications

CategoryFeatureSpecification
CameraImage sensor3K CMOS Image sensor
Video Resolution2960 (H) × 1665 (V)
Signal SystemPAL/NTSC
Frame RateTVI: 3K @10 fps/12.5 fps/20 fps/25 fps, 4 MP @ 25 fps/30 fps, 1080P @ 25 fps/30 fps
Lens2.8 mm
Min.Illumination0.01 Lux @(F1.6, AGC ON), 0 Lux with White Light
Angle of View2.8 mm, horizontal FOV: 105°, vertical FOV: 62°, diagonal FOV: 131°
Supplement Light typeWhite Light (2pcs led) & IR (2pcs led)
Supplement Light RangeIR : Up to 25 m, white Light : Up to 20 m
Supplement Light ModeIR light works normally, and it switches to white light when human or vehicle are detected at night.
Wide Dynamic RangeDigital WDR
IR Cut FilterYes
Video Output1 HD Analog output
Microphone Pickup DistanceIn a radius of up to 5 m
GeneralSpeaker Rated Power2W
Speaker RangeIn a radius of up to 5 m
HousingPlastic
ColorWhite
Operating PowerDC12V
Operating Temperature-40 °F – 140 °F /-40 °C – 60 °C
Indoor/OutdoorIndoor/Outdoor
Weatherproof RatingIP67
Dimension (L x W x H)Ø110 mm x 93 mm (Ø4.33"x 3.66")
WeightApprox. 270 g (0.81 lb.)

5. Setup Guide

We recommend testing the camera video locally before permanent installation. Please disconnect power before installation.

5.1. Connection Diagram

Detailed connection diagram for the Annke 3K Security Camera System, showing cameras connected to DVR, DVR to monitor, router, and power.
Figure 5.1: System Connection Diagram
  1. Install the cameras in the desired location.
  2. Connect your camera with the video & power cable.
    • Connect the camera's BNC female port to the video & power cable's BNC male port.
    • Connect the camera's DC female port to the video & power cable's DC male port.
  3. Connect the 1-to-4 power splitter cable to the video & power cable's DC port and power adapter.
    • Connect the video & power cable's DC female port to the 1-to-4 power splitter cable's DC male port.
    • Connect the 1-to-4 power splitter cable's DC female port to the camera power adapter's DC male port.
  4. Connect the video cable's BNC male port to the DVR's BNC VIDEO IN port.
  5. Connect your DVR to a monitor via a VGA cable for live view.
  6. Connect your DVR to an HD TV via an HDMI cable for live view.

    Note: The DVR usually has HDMI and VGA video output ports; you can select one video output port to connect a monitor or HD TV.

  7. Connect the mouse's USB port to the DVR's USB port.
  8. Connect your DVR's RJ-45 port to the router's LAN port with a network cable.
  9. Connect the DVR's power adapter to the DVR's DC12V input port.

5.2. Initial System Setup

Follow the on-screen wizard to set up your DVR step by step.

  1. Create the DVR's password.
  2. Set reserved E-mail and backup GUID files.
  3. Set unlock pattern and security questions.
  4. Setting signal input status.
  5. Choose the system's language.
  6. Configure the time zone.
  7. Configure the IP Address and P2P function.
  8. Configure the ports and other settings.

A. Create Your Passwords

For first-time access, you need to activate the device by setting an admin password. Input your password three times to create it. It is recommended to reset your password monthly for better privacy protection.

Screenshot of the 'Activate Device' screen for setting up the admin password.
Figure 5.2: Password Creation Screen

B. Set the P2P Function

Manually create a verification code (6 to 12 digits or letters, ABCDEF is not allowed) and confirm it. Download the free Annke Vision APP, then follow the APP's prompts to scan the SN QR code to add the device. The device can only be successfully added if the P2P status is online. You can also go to Main Menu > Configuration > Network Settings > Platform Settings and scan the DVR's QR-Code to add it.

Screenshot of the Annke Vision P2P setup screen with QR code for device addition.
Figure 5.3: P2P Function Setup

C. Adjust the VGA/HDMI Output Resolution

The default DVR output resolution is 1024*768. For better viewing, adjust the DVR output resolution to a higher level if your monitor supports it. Navigate to System > General > Resolution to change this setting.

6. Operating Instructions

6.1. DVR Menu Structure

The DVR interface may vary slightly between different models and software versions. A general overview of the menu structure includes options for Live view, Playback, Search, System settings, Network configuration, Camera management, Record settings, Maintenance, and Shutdown.

6.2. Recording and Playback

The system supports various recording methods and customizable playback options.

Illustration of four video recording ways: 24/7 Continuous Recording, Motion Detection Recording, Scheduled Recording, and Recycle Recording.
Figure 6.1: Video Recording Ways
  • 24/7 Continuous Recording: Records continuously.
  • Motion Detection Recording: Records only when motion is detected.
  • Scheduled Recording: Records according to a predefined schedule.
  • Recycle Recording: Overwrites oldest footage when storage is full.

You can customize recording and playback settings via the DVR interface.

Screenshot showing customizable recording and playback timeline with indicators for person and vehicle detection.
Figure 6.2: Customize Recording & Playback

6.3. Night Vision Modes

The cameras feature three smart night vision modes for optimal visibility in low-light conditions:

Comparison of night vision modes: 66ft Full Color Night Vision, 82ft IR Night Mode, and Human & Vehicle triggered color mode.
Figure 6.3: Smart Night Vision Modes
  • Infrared B&W Mode: Provides crisp 82ft night vision in total darkness.
  • Full Color Night Vision: Achieves 66ft full-color night vision using built-in white light.
  • Triggered Color Mode: Automatically activates the spotlight and switches from infrared to color upon human or vehicle detection.

6.4. Remote Access via Mobile Phone

Access your security system remotely using the Annke Vision App.

A. Connect DVR to the Internet

Connect your DVR to your router using a network cable. Go to Menu > Configuration > Network > Platform Access. Ensure the P2P status shows "Online".

Screenshot of the DVR network settings showing P2P status.
Figure 6.4: DVR Internet Connection Status

B. Install Annke Vision App

Download the free Annke Vision APP from Google Play (for Android) or Apple App Store (for iOS). You can also scan the QR codes below:

Placeholder image for Annke Vision Android app QR code.
Android App QR Code
Placeholder image for Annke Vision iOS app QR code.
iOS App QR Code

C. Add the Device

After installing the app, select your country/region and register an account. To add your DVR, select the '+' icon in the upper right corner of the app. You can then scan the SN QR code found in Menu > Configuration > Network > Platform Access, or manually enter the device details.

D. Live View and Playback

Click the device name in the app to start live view. You can also playback recorded video, share the device, and perform other operations, including adjusting live view quality, starting/stopping live view windows, turning audio on/off, digital zoom, and capturing screenshots.

7. Maintenance

  • Ensure the plug is firmly connected to the power socket.
  • Do not drop the camera or the DVR.
  • Avoid touching the camera lens with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently.
  • Avoid placing the camera in extremely hot, cold (operating temperature: -40°C to 60°C), dusty, or damp locations.
  • Do not expose the camera to high electromagnetic radiation.
  • Regularly reset your DVR password (e.g., monthly) to protect your privacy.

8. Troubleshooting

  • No Recording/Playback: Ensure the hard disk is properly installed. Without an HDD, only live preview is available.
  • Poor Night Vision: Avoid placing cameras where large areas of black objects, open spaces, water, or other infrared-absorbing objects are in the monitoring scope, as this can reduce night vision effectiveness.
  • Poor Image Quality: Ensure the camera's installation angle does not obstruct the edges of the image. Do not point the camera directly at the sun or other bright light sources.
  • P2P Connection Issues: Verify that the DVR is connected to the internet via a network cable and that the P2P status in the DVR's network settings shows "Online".

9. User Tips

  • For optimal performance, install cameras at a recommended height of more than 2 meters.
  • Utilize the "Smart Dual-Light Mode" for effective deterrence and clear color footage when motion is detected at night.
  • Take advantage of H.265+ compression to save storage space and bandwidth, allowing for longer recording times.
  • Regularly check the Annke Vision app for notifications and device alarms to stay informed about your security status.

10. Warranty & Support

For technical support or any questions regarding your Annke 3K Security Camera System, please contact:

Shenzhen Kean Digital co.,Ltd.

Address: Room 1001, Rujun Building, No.105 Center Road, Bantian Street, Longgang District, Shenzhen, China. 518000

Tech Support Email Address: support@annke.com

Telephone Support:

  • US and CA: +1 833 717 0187 (Free Call, 7:00 am - 7:30 pm EST, Weekday)
  • UK: +44 8081966228 (Free Call, 12 am - 8 pm GMT, Weekday)

For more information, visit www.annke.com.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.