SUMRY MPS-VIII ECO Series

Contents

SUMRY MPS-VIII ECO Series Hybrid Solar Inverter User Manual

Model: MPS-VIII ECO Series (3.6kW, 4.2kW, 6.2kW)

Brand: SUMRY

1. Introduction

The SUMRY MPS-VIII ECO Series is a multi-functional hybrid solar inverter designed to combine the functions of an inverter, solar charger, and battery charger to offer uninterruptible power support. This series includes models with power ratings of 3.6kW, 4.2kW, and 6.2kW, operating at 24V or 48V DC and providing 230VAC output. It features a pure sine wave output, high PV input voltage range, and built-in MPPT solar charge controller, making it suitable for various on-grid and off-grid applications.

SUMRY MPS-VIII ECO Series Hybrid Solar Inverter with key features
Figure 1: SUMRY MPS-VIII ECO Series Inverter highlighting key specifications.
Pure Sine Wave Inverter features including battery-less operation and dual communication ports
Figure 2: Key features of the Pure Sine Wave Inverter, including battery-less operation and communication capabilities.

2. Safety Information

Please read all instructions and cautionary markings on the unit and in this manual before installation and operation. This inverter is designed with multiple protection features to ensure safe operation. However, improper installation or use can lead to hazards.

  • Ensure all wiring is performed by qualified personnel.
  • Do not disassemble the inverter. There are no user-serviceable parts inside.
  • Keep the inverter away from flammable materials and moisture.
  • Ensure proper ventilation around the inverter to prevent overheating.
  • Verify battery voltage and polarity before connecting to the inverter.
  • Always disconnect all power sources (PV, AC, Battery) before performing any maintenance or wiring.
Diagram showing comprehensive protection features of the inverter
Figure 3: Comprehensive protection features including Overload, Overheating, High/Low Voltage, Battery, Short Circuit, Overcurrent, Anti-Reverse, and Power Failure Protection.

3. Product Overview

3.1 Physical Dimensions and Features

The inverter features a compact design with dimensions of 420mm (D) x 310mm (W) x 110mm (H).

Inverter dimensions and communication ports
Figure 4: Inverter dimensions and location of dual communication ports (BMS RS485, WiFi RS232).

3.2 Display and Controls

The inverter is equipped with an LCD display and function buttons for monitoring and configuration. LED indicators provide quick status updates.

LCD Display, LED Indicators, and Function Keys with descriptions
Figure 5: Front panel showing LCD display, LED indicators, and function buttons.

LED Indicator Messages:

LED IndicatorStateMessages
INV/ACSolid OnOutput is powered by utility in Line mode.
GreenOutput is powered by battery or PV in battery mode.
CHGSolid OnBattery is fully charged.
GreenBattery is charging.
FAULTSolid OnFault occurs in the inverter.
RedWarning condition occurs in the inverter.

Function Keys:

Function KeyDescription
ESCTo exit setting mode
UPTo go to previous selection
DOWNTo go to next selection
ENTERTo confirm the selection in setting mode or enter setting mode

4. Specifications

The following table details the technical specifications for the SUMRY MPS-VIII ECO Series Hybrid Solar Inverter models.

Product Data Sheet Part 1: PV Input, Grid Output, Efficiency
Figure 6: Product Data Sheet - Part 1 (PV Input, Grid Output, Efficiency).
Product Data Sheet Part 2: Two-Load Output, Off-Grid Operation, Battery Charger
Figure 7: Product Data Sheet - Part 2 (Two-Load Output, Off-Grid Operation, Battery Charger).
Product Data Sheet Part 3: General, Interface, Environment, Standard
Figure 8: Product Data Sheet - Part 3 (General, Interface, Environment, Standard).
FeatureMPS-VIII 3.6KWMPS-VIII 4.2KWMPS-VIII 6.2KW
General
Phase1-phase
Dimension (D*W*H)420*350*110 mm
Net Weight8.0 kgs8.0 kgs8.9 kgs
Operating Temperature-10°C ~ 50°C
Humidity5% to 95% Relative Humidity (Non-condensing)
Compliance SafetyCE
PV Input (DC)
Nominal DC Voltage/Max DC Voltage360/500 VDC
Start-up Voltage/Initial Feeding Voltage90VDC/120VDC
MPPT Voltage Range60-450 VDC
Maximum Input Current1/18 A1/22 A1/18 A, 1/22 A
Max PV Input Power6200 W6200 W6500 W
Grid-Tie Operation
Rated Output Power3600W/3600VA4200W/4200VA6200W/6200VA
Nominal Output Voltage220/230/240 VAC
Output Voltage Range195-253 VAC
Nominal Output Current15.7 A18.2 A27.0 A
Power Factor>0.99
Max Conversion Efficiency (DC/AC)98%
Two-Load Output Power
Full Load3600 W4200 W6200 W
Maximum Main Load3600 W4200 W6200 W
Max Second Load (battery mode)1200 W1400 W2067 W
Max Load Cut Off Voltage (24V/48V)26VDC/52VDC26VDC/52VDC26VDC/52VDC
Max Load Return Voltage (24V/48V)27VDC/54VDC27VDC/54VDC27VDC/54VDC
Off-Grid Operation
AC Start-up Voltage/Auto Restart Voltage120-140VAC/180VAC
Acceptable Input Voltage Range90-280VAC or 170-280VAC
Maximum AC Input Current21.1 A24.7 A36.4 A
Frequency Range59-61 Hz
Nominal Output Voltage (Battery Mode)220/230/240 VAC
Output Waveform (Battery Mode)Pure sine wave
Efficiency (DC to AC)94%
Battery Charger
Nominal DC Voltage24VDC48VDC24VDC, 48VDC
Maximum Solar Charging Current120 A80 A120 A, 80 A
Maximum AC Charging Current100 A
Maximum Solar+AC Charging Current120 A80 A120 A, 80 A
Interface
Communication PortRS232/RS485/WIFI/GPRS/LITHIUM BATTERY

5. Installation and Setup

Proper installation is critical for the safe and efficient operation of your SUMRY Hybrid Solar Inverter. Ensure all local electrical codes are followed.

5.1 System Architecture

The inverter can be integrated into various solar power systems, including off-grid and on-grid configurations with or without battery backup.

Off-Grid Solar Inverter system diagram showing connections for solar panels, generator, battery, and home appliances
Figure 9: Off-Grid Solar Inverter System Diagram. Solar panels are recommended to be connected in series.
Basic System Architecture diagram for on/off grid solar inverter with monitoring
Figure 10: Basic System Architecture for On/Off Grid Solar Inverter, including monitoring via APP/Computer.

5.2 Connection Ports

Identify the various connection ports on the rear panel of the inverter for proper wiring.

Rear panel connections with numbered labels for AC input, outputs, battery, and communication
Figure 11: Rear Panel Connections. 1: AC input, 2: Main output, 3: Second output, 4: Battery communication RS-485 port, 5: WIFI communication RS-232 port, 6: PV input, 7: Battery input.
  1. AC Input: Connect the utility grid or generator AC power source.
  2. Main Output: Connect to your primary AC loads.
  3. Second Output: Connect to secondary AC loads, if applicable.
  4. Battery Communication RS-485 Port: For communication with compatible battery management systems (BMS).
  5. WIFI Communication RS-232 Port: For WiFi module connection and remote monitoring.
  6. PV Input: Connect the solar panel array. Ensure correct polarity and voltage within specified limits.
  7. Battery Input: Connect the battery bank. Ensure correct polarity and voltage (24V or 48V).

5.3 Battery Compatibility

The inverter is compatible with multiple battery types, offering flexibility for your energy storage needs.

Diagram showing compatible battery types: Flooded, Gel, LiFePO4, Lithium, AGM, and User Custom
Figure 12: Compatible Battery Types.
  • Flooded Batteries
  • Gel Batteries
  • LiFePO4 Batteries (Lithium Iron Phosphate)
  • Lithium Batteries
  • AGM/Sealed Batteries
  • User Custom Battery settings

6. Operating Instructions

Once installed, the inverter can be operated and monitored via its LCD display and function buttons. For detailed settings and monitoring, refer to the specific communication software or app.

6.1 Powering On/Off

  • To Power On: Ensure all connections are secure. Turn on the battery breaker first, then the PV array breaker, and finally the AC input breaker (if connected to grid/generator). The inverter will initiate its startup sequence.
  • To Power Off: Reverse the power-on sequence. First, turn off the AC input breaker, then the PV array breaker, and finally the battery breaker.

6.2 Monitoring and Settings

Use the function keys (ESC, UP, DOWN, ENTER) to navigate through the LCD display menus to view operational data and adjust settings. Refer to the LED Indicator Messages and Function Keys table in Section 3.2 for basic understanding.

For advanced monitoring and configuration, connect to the inverter via the RS485 (BMS) or RS232 (WiFi) communication ports using appropriate software or mobile applications.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter.

  • Cleaning: Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris.
  • Connection Checks: Annually inspect all electrical connections (PV, battery, AC) for tightness and signs of corrosion.
  • Environment: Ensure the operating environment remains within specified temperature and humidity ranges.
  • Firmware Updates: Check the manufacturer's website for any available firmware updates to improve performance or add features.

8. Troubleshooting

If the inverter is not operating as expected, refer to the LED indicators (Section 3.2) for fault or warning messages. Common issues and basic troubleshooting steps are listed below:

  • No Power/Display Off: Check all power connections (battery, AC input). Ensure battery voltage is within the operating range.
  • Fault LED On: Refer to the LCD display for specific error codes. This usually indicates an internal fault or a severe external condition. Disconnect all power sources and contact support if the fault persists after restarting.
  • Warning LED Flashing: Indicates a non-critical condition that may affect performance. Check for environmental issues (overheating) or input voltage fluctuations.
  • No AC Output: Verify AC output connections. Check if the inverter is in a fault state. Ensure sufficient PV input or battery charge.
  • Battery Not Charging: Check PV input connections and voltage. Verify battery settings are correct for the connected battery type.

For complex issues, it is recommended to contact qualified technical support.

9. User Tips

  • Voltage Compatibility: The inverter's nominal output voltage is 220/230/240VAC. While some systems might use 110V, this inverter is primarily designed for higher voltage AC systems. Ensure your load voltage matches the inverter's output.
  • Battery Selection: Utilize the inverter's compatibility with various battery types (Flooded, Gel, LiFePO4, Lithium, AGM) to select the best option for your specific application and budget. Ensure the battery voltage (24V or 48V) matches your inverter model.
  • Monitoring: Take advantage of the dual communication ports (RS485 for BMS, RS232 for WiFi) to set up remote monitoring. This allows you to track performance and receive alerts, optimizing your system's efficiency.

10. Warranty and Support

The SUMRY MPS-VIII ECO Series Hybrid Solar Inverter comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

Warranty and service information: 1 year warranty, 24 hours response time
Figure 13: Warranty and Service details.

For technical support, warranty claims, or service inquiries, please contact SUMRY customer service. Expect a response within 24 hours for your queries.

Manufacturer: Shenzhen Sunray Power Co., Ltd.

Brand: SUMRY

Store: SUMRY Inverter Store


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.