1. Introduction
Thank you for choosing the Zealot-S127 Portable Bluetooth Speaker. This manual provides important information on how to set up, operate, and maintain your speaker. Please read it thoroughly before use and keep it for future reference.
Safety Warnings
- Read the manual carefully before operation.
- Store the product in a dry and cool place.
- Avoid high temperatures, direct sunlight, and charging near heat sources.
- To prevent hearing damage, avoid listening at high volumes for extended periods.
- Do not use alcohol, benzene, or other chemicals for cleaning.
- Keep out of reach of children.
- Do not disassemble or modify the product.
- Battery replacement must be done with the same or equivalent type to prevent explosion.
- Do not expose the battery to excessive heat (sunlight, fire).
- Do not dispose of any part in fire.
2. Package Contents
Please check the box for the following items:
- 1 x Zealot-S127 Portable Bluetooth Speaker
- 1 x USB-C Charging Cable
- 1 x Audio Cable (AUX)
- 1 x Storage Bag
- 1 x Shoulder Strap
- 1 x Instruction Manual

3. Product Overview
Familiarize yourself with the speaker's controls and ports.

Control Panel:
- Power Button: Long press to turn ON/OFF.
- Light ON/OFF Button: Toggles RGB lights.
- EQ Button: Cycles through Equalizer modes (Bass, Vocal, Normal).
- Mode (M) Button: Switches between Bluetooth, TF Card, and AUX modes.
- Play/Pause Button: Plays or pauses audio.
- Volume Down (-) / Previous Track: Long press for volume down, short press for previous track.
- Volume Up (+) / Next Track: Long press for volume up, short press for next track.
- PartyAdd Button: Initiates True Wireless Stereo (TWS) pairing.
Ports:
- IN 5V (USB-C): Charging input port.
- OUT 5V (USB-A): Power bank output port.
- AUX: 3.5mm audio input port.
- TF: MicroSD card slot.
4. Setup
4.1 Charging the Speaker
Before first use, fully charge the speaker. Use the provided USB-C cable and a compatible power adapter (DC 5V, 2A or higher for faster charging).
- Connect the USB-C end of the charging cable to the IN 5V port on the speaker.
- Connect the other end of the cable to a USB power adapter.
- The charging indicator will illuminate. Once fully charged, the indicator may change color or turn off.
Note: For optimal performance and battery longevity, avoid completely draining the battery frequently.
4.2 Powering On/Off
Long press the Power Button on the control panel for approximately 3 seconds to turn the speaker ON or OFF. A prompt tone will indicate the status.
5. Operating Instructions
5.1 Bluetooth Connection
- Turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing light or prompt tone.
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "ZEALOT-S127" from the list of devices.
- Once connected, a prompt tone will confirm the successful pairing.
Note: The speaker will automatically try to reconnect to the last paired device when powered on.
5.2 Mode Switching
Press the Mode (M) Button to cycle through the available playback modes:
- Bluetooth Mode: For wireless audio streaming.
- TF Card Mode: Plays audio files directly from a MicroSD card (up to 32GB, FAT32 format, MP3 files recommended).
- AUX Mode: For wired connection using the 3.5mm audio cable.
5.3 Music Playback
- Play/Pause: Press the Play/Pause Button.
- Next Track: Short press the Volume Up (+) Button.
- Previous Track: Short press the Volume Down (-) Button.
- Volume Up: Long press the Volume Up (+) Button.
- Volume Down: Long press the Volume Down (-) Button.
5.4 PartyAdd (True Wireless Stereo - TWS) Function
Connect multiple Zealot-S127 speakers for a synchronized audio experience.
- Ensure all S127 speakers you wish to connect are powered on.
- Connect one speaker (the primary speaker) to your device via Bluetooth.
- On the primary speaker, press the PartyAdd Button. It will enter TWS search mode.
- On each additional S127 speaker (secondary speakers), press the PartyAdd Button. They will automatically connect to the primary speaker.
- A prompt tone will confirm successful connection for each speaker. All connected speakers will play audio synchronously.

5.5 Lighting Effects
The speaker features dynamic RGB lighting.
- Press the Light ON/OFF Button to turn the lights on or off.
- Press the Light Mode Switch Button to cycle through different lighting patterns.

5.6 Equalizer (EQ) Settings
Press the EQ Button to switch between different sound profiles:
- Bass: Enhances low frequencies for a deeper sound.
- Vocal: Optimizes mid-range frequencies for clearer vocals.
- Normal: Provides a balanced sound profile.
6. Maintenance
6.1 Cleaning
- Wipe the speaker with a soft, dry cloth.
- Do not use abrasive cleaners, alcohol, benzene, or other chemicals, as they may damage the surface or internal components.
6.2 Battery Care
- Charge the speaker regularly, even if not in use, to maintain battery health.
- Avoid extreme temperatures, which can reduce battery life.
- Do not attempt to replace the battery yourself. Contact qualified service personnel if battery issues arise.
7. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Speaker won't turn on. | Battery might be depleted. Charge the speaker fully before attempting to turn it on. |
| Speaker won't charge. | Battery might be in a dormant state (due to low temperature/deep discharge). Charge continuously for at least 1 hour; charging should normalize. Check charging cable and adapter. |
| No sound output. | Check volume levels on both speaker and connected device. Ensure music is playing. If using TF card, ensure music format is MP3. |
| Cannot connect/pair via Bluetooth. | Ensure speaker is in Bluetooth pairing mode. Disconnect other Bluetooth devices from your phone. Move speaker closer to your device. Restart both devices. |
| Volume cannot be adjusted. | Check if both speaker and phone volume are already at maximum or minimum. Adjust from both ends. |
| TF card not recognized. | Ensure TF card is formatted to FAT32 and contains MP3 audio files. Max capacity 32GB. |
| Cannot connect to TV. | Connect via AUX data cable to the TV's audio output port. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | Zealot-S127 |
| Wireless Version | Bluetooth 5.3 |
| Output Power | 100W |
| Battery Capacity | 24,000mAh |
| Playback Time | Up to 12 hours (varies by volume and content) |
| Charging Voltage | DC 5V (2A recommended) |
| Charging Interface | USB-C |
| Charging Time | Approx. 4 hours (with 45W fast charger) |
| Power Bank Output | 5V 2A (USB-A) |
| Working Voltage | 11.1V |
| Frequency Range | 20Hz - 20KHz |
| Transmission Distance | Up to 10 meters (33 feet) |
| Signal-to-Noise Ratio | ≥90dB |
| Distortion | <1% |
| Waterproof Rating | IPX6 |
| Audio Input | Bluetooth, TF Card, AUX |
| Microphone | Built-in |
| Dimensions (L x W x H) | 33.6 x 17.1 x 17.0 cm (13.23 x 6.73 x 6.69 inches) |
| Weight | 3.54 kg (7.8 lbs) |
| FCC ID | 2AFKR-S127 |
| Certifications | CE |

9. User Tips
- Optimal Placement: For the best sound experience, place the speaker on a stable surface at ear level.
- Outdoor Use: While IPX6 rated, avoid submerging the speaker in water. Ensure port covers are securely closed when near water.
- Battery Preservation: For long-term storage, charge the speaker to about 50-70% and store it in a cool, dry place. Recharge every few months.
- PartyAdd Setup: For a seamless multi-speaker experience, connect the primary speaker to your device first, then add secondary speakers one by one.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for warranty claims.