1. Introduction
The GuliKit TT MAX Wireless Game Controller is a high-performance gamepad designed for an immersive gaming experience across multiple platforms. Featuring advanced TMR joysticks with adjustable tension, Hall Effect triggers, and customizable buttons, it offers precise control and reliable performance. This manual provides detailed instructions for setting up, operating, and maintaining your controller.
2. Package Contents
Please check the package for the following items:
- GuliKit TT MAX Wireless Game Controller
- USB-C to USB-A Data Cable
- Hyperlink Gen 2 Wireless Controller Adapter (USB Dongle)
- Additional Joystick Caps (various heights)
- Additional ABXY Buttons (for customization)
- Additional Rear Paddles
- User Manual (this document)

CAUTION! This product contains small parts (such as buttons, joystick caps, and screws) that may pose a choking hazard if swallowed by children.
3. Controller Overview
Familiarize yourself with the controller's layout and indicators:
- Controller Mode Indicator Light: Shows the current operating mode.
- Controller Battery Indicator Light: Displays battery status.
- USB-C Port: For charging and wired connection.
- Mode Button: Double-click to switch modes. Long press to power off, click to power on.
- Pairing Button: Long press for over 2 seconds to initiate pairing.
- APG Button: For Auto-Pilot Gaming functionality.
- Settings Button: Used in combination with other buttons for advanced settings.


4. Setup and Connection
4.1. Power On/Off
- Power On: Short press the Mode button or Home button.
- Power Off: Long press the Mode button.
- The controller automatically powers off after 15 minutes of inactivity.
- The controller will not power off automatically when connected via USB or when Auto-Continuous Fire (Turbo) is active.
4.2. Charging
Connect the USB-C to USB-A data cable to the controller's USB-C port and the other end to a power source (e.g., computer USB port, USB wall adapter). The Controller Battery Indicator Light will show charging status.
4.3. Pairing Methods
4.3.1. PC (Windows)
The GuliKit TT MAX supports both Bluetooth and Wired connections for PC.
- Bluetooth Pairing - 730Hz Polling Rate:
- Switch the controller to PC mode.
- Press and hold the Pairing Button for 2 seconds until the indicator light flashes rapidly.
- On your computer, open Bluetooth settings, search for new devices, and select "GuliKit XW Controller".
- Once the interface displays "Connected", pairing is complete.
- Wired Connection - 1000Hz Polling Rate:
- Set the controller to PC mode.
- Connect one end of the USB-C to USB-A data cable to the controller and the other end to a USB-A port on your computer.
- For desktop computers, it is recommended to use a USB port on the back of the computer case for a more stable connection.
4.3.2. Android, iOS, macOS Devices
- Switch the controller to the corresponding mode (Android/iOS).
- Press and hold the Pairing Button for 2 seconds until the indicator light blinks quickly.
- On your device, go to Bluetooth settings, search for new devices, and select "GuliKit XW Controller".
- The interface will display "Connected" once pairing is complete.
4.3.3. Nintendo Switch / Switch 2
- Set the controller to NS mode and power it on.
- Press and hold the Pairing Button for 2 seconds. The indicator light will blink quickly.
- When the Switch/Switch 2 is in sleep mode (black screen), press the HOME button on a Joy-Con to wake it up. This will enter the controller pairing interface.
- Once the Switch/Switch 2 interface shows that a new controller is connected, the pairing is complete.
4.4. Joysticks Calibration
To calibrate the joysticks:
- While the controller is powered on, press and hold the "L," "R," "D-pad Left," and "A" buttons simultaneously for 6 seconds to enter calibration mode.
- Rotate both the left and right joysticks in full circles 2 to 3 times.
- The controller will vibrate once to indicate successful calibration and will automatically exit calibration mode.
4.5. PC Gyroscope Calibration
To calibrate the gyroscope for PC:
- While the controller is powered on and placed on a flat surface, press and hold the "+", "-", "D-pad Left", and "A" buttons simultaneously to initiate automatic gyroscope calibration.
- The controller will vibrate once to indicate successful calibration.
Note: Calibration is not necessary when the gyroscope is functioning normally.
5. Operating Instructions and Advanced Features
The GuliKit TT MAX offers a range of customizable features to enhance your gaming experience.
5.1. Auto Pilot Gaming (APG) Functionality
The patented APG feature allows you to record and replay controller actions.
- Recording: Long press the APG button for 3 seconds (short vibration). Perform your desired controller actions. Press the APG button again to end recording (long vibration).
- Single Playback: Short press the APG button.
- Repeat Playback: Double-click the APG button.
During replay, you can still use the joystick for movement, allowing you to perform actions while moving. To cancel replay midway, press any other button. Maximum recording time is 10 minutes.

5.2. Back Button Configuration Mapping
The 4 metal rear paddles (G1, G2, G3, G4) can be mapped to other buttons.
- Mapping: Press the Settings button (short vibration) + desired Back button (G1-G4). Then press the button you want to map to it.
- Cancel: Press the Settings button + desired Back button (long vibration) to cancel the current mapping.
Note: The back buttons can only map to normal key functions and do not support the Continuous Fire feature.
5.3. Back Button APG Function
Each of the 4 back buttons has a 30-second APG function.
- Recording: Press APG button + desired Back button. Perform controller actions. Press the APG button again to end recording.
- Single Playback: Short press the Back button.
5.4. Trigger Mode Setting
Toggle the switch on the back of the controller to switch between digital tactile switch trigger mode and Hall effect analog trigger mode for ZL and ZR triggers.
Make sure the triggers are released before switching modes.
5.5. Special Function Settings (General Notes)
- All special function settings require holding down the Settings button while pressing the corresponding buttons for configuration.
- All special settings will be automatically saved.
- The logo light will be white when no special settings are configured, and blue when special settings are configured.
- When the battery is low, the logo light will flash, and the vibration function will automatically turn off. Vibration will resume when the battery level is restored.
5.6. Clear All Settings (Reset)
To restore factory settings, press and hold the Settings button + Mode button + Home button simultaneously. A long vibration indicates the reset is complete.
5.7. Joystick Dead Zone Mode
Press Settings button + Screenshot button to cycle through modes:
- One Vibration: Joystick with dead zone mode (high-sampling-rate).
- Two Vibrations: Anti-Snapback mode (Dead zone ON, low-sampling-rate).
- Long Vibration: Joystick without dead zone mode (high-sampling-rate, default setting).

5.8. Continuous Fire (Turbo)
Press Settings button + ZR button to cycle through modes:
- One Vibration: Normal Continuous Fire (active when button is held, stops when released).
- Two Vibrations: Auto Continuous Fire (press once to activate, press again to stop).
- Long Vibration: Cancel Continuous Fire.
5.9. A-B X-Y Swap
Press Settings button + A button to cycle through modes:
- One Vibration: Swaps input values of the A-B and X-Y buttons.
- Long Vibration: Restores default button assignments.
5.10. Vibration Intensity Adjustment
Press Settings button + D-pad Up/Down to adjust vibration intensity:
- One Vibration: Weak vibration.
- Two Vibrations: Standard vibration (default setting).
- Three Vibrations: Strong vibration.
- Long Vibration: Turn off vibration.
5.11. Vibration Mode Adjustment
Press Settings button + D-pad Left/Right to adjust vibration mode:
- One Vibration: Rotary Motor mode.
- Two Vibrations: GuliKit Maglev Haptic mode (PC Default setting).
- Three Vibrations: HD vibration mode (Switch Default setting).

5.12. Joystick Sensitivity Adjustment (R3 L3)
Press Settings button + R3/L3 (pressing down on the joystick) to adjust sensitivity:
- One Vibration: Sensitivity 50%.
- Two Vibrations: Sensitivity 100% (default setting).
- Three Vibrations: Sensitivity 150%.
Each joystick can be individually configured.
5.13. D-pad Mode (4-direction/8-direction)
Press Settings button + D-pad button to adjust D-pad mode:
- One Vibration: D-pad switches to 4-direction mode.
- Long Vibration: Restores default 8-direction mode (default setting).
5.14. Motion Aim Assist for PC FPS Games
Press Settings button + L/ZL to set motion aim assist:
- One Vibration: Low sensitivity aim assist.
- Two Vibrations: Medium sensitivity aim assist.
- Three Vibrations: High sensitivity aim assist.
- Long Vibration: Disable motion aim assist (default mode).
+L: Set motion assist to activate when the L button is held in-game.
+ZL: Set motion assist to activate when the ZL trigger is held in-game.
5.15. Star Ring Lighting Effects
Press Settings button + Joystick button to cycle through lighting effects:
- Default steady on
- Joystick-activated flowing Light
- Colorful Flowing Light
- Trigger-activated flowing light
- Off
- (Repeats in this cycle)

5.16. APG Recording File Share
This feature allows you to manage your APG recording files:
- Enter APG read/write mode (specific button combination not provided in OCR, refer to official GuliKit documentation if needed).
- Insert the USB data cable into your computer. A USB drive named "GuliKit dat" should appear.
- Open the USB drive to find "Auto.apg", your APG recording file. You can copy it for backup or sharing.
- To overwrite an existing APG file, copy a new APG file into the USB drive.
Once writing is complete, the controller will automatically power off. Avoid changing the file name to ensure proper functionality.
6. Maintenance
- Keep the controller clean by wiping it with a dry, soft cloth.
- Avoid exposing the controller to extreme temperatures, humidity, or direct sunlight.
- Do not disassemble the controller, as this may void the warranty and cause damage.
- Store the controller in a safe place to prevent physical damage.
7. Troubleshooting
- Controller not powering on: Ensure the battery is charged. Connect it to a power source using the USB-C cable.
- Connection issues: Re-attempt pairing. For PC wired connection, try a different USB port, preferably on the back of a desktop computer. Ensure the correct mode is selected on the controller for your device.
- Buttons or joysticks not responding: Try calibrating the joysticks (Section 4.4). If issues persist, perform a factory reset (Section 5.6).
- Continuous Fire not working as expected: Review the Continuous Fire settings (Section 5.8) and ensure the correct mode (Normal or Auto) is selected. Note that rear paddles do not support Continuous Fire.
- Gyroscope not working on PC: Perform PC Gyroscope Calibration (Section 4.5).
- PS5 Compatibility: The GuliKit TT MAX can work on PS5 via a P5 Brook adapter. Set the controller to Switch mode, and it should function via USB and wirelessly with the dongle.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | GuliKit |
| Model Number | NS69 (TT Max) |
| Compatible Platform | Nintendo Switch, Nintendo Switch 2, PC, Android, iOS |
| Compatible Nintendo Model | Nintendo Switch 2, Nintendo Switch, Nintendo Switch OLED |
| Interface Type | Bluetooth, Type C |
| Joystick Sensor Module Brand/Type | TMR Joysticks (Hall Effect) |
| Trigger Button Type | Hall-Linear |
| ABXY Switch Type | Tactile switch |
| Bumpers Switch Type | Tactile switch |
| D-pad Switch Type | MEMBRANE |
| RGB lighting joysticks | Yes |
| Battery Included | Yes |
| Support Software configuration | No |
| Certification | CE |



9. User Tips
- PS5 Compatibility: For PS5, use a P5 Brook adapter. Set the GuliKit TT MAX controller to Switch mode, and it will work via USB and wirelessly with the dongle.
- Continuous Fire in FPS Games: Be aware that using the Auto Continuous Fire setting for AR guns might cause them to shoot automatically until the magazine is empty. For precise control in games like Warzone or ranked multiplayer, normal fire mode or careful use of rapid fire for pistols is recommended.
- High Quality Build: Users consistently praise the solid, high-quality construction of the controller.
10. Warranty and Support
GuliKit products are designed for durability and performance. For detailed warranty information and technical support, please visit the official GuliKit website:
You can also find more FAQs and troubleshooting guides on the website under the Technical Support section.
A user manual in PDF format is available for download and reference: GuliKit TT PRO Controller User Manual (PDF)