1. Introduction
Thank you for choosing the VTOMAN VT-PRO 10000A Car Battery Jump Starter. This powerful and portable device is designed to jump start 12V and 24V vehicles, including cars, trucks, motorcycles, RVs, and yachts. It also functions as a portable power bank and features an LED flashlight. Please read this manual carefully before use to ensure safe and optimal performance.
Image: VTOMAN VT-PRO Jump Starter highlighting its 10000A peak current, 12V/24V compatibility, and suitability for all gas and diesel engines.
2. Package Contents
Please check the package for the following items:
- VT-PRO Jump Starter Unit
- 145W AC Adapter
- USB Charging Cable
- User Manual (this document)
Image: Visual representation of the VTOMAN VT-PRO package contents.
3. Product Overview
Familiarize yourself with the different parts of your VTOMAN VT-PRO jump starter:
Image: Detailed diagram showing the various ports, buttons, and indicators on the VTOMAN VT-PRO unit.
- Battery Level Indicator: Shows the current charge level.
- 12V Mode Indicator: Lights up when in 12V jump start mode.
- 24V Mode Indicator: Lights up when in 24V jump start mode.
- Warning Lights: Indicates potential malfunctions or safety alerts.
- Battery Clamp: Connects to the vehicle battery terminals.
- LED Flashlight: Provides illumination with multiple modes.
- Flashlight Button: Activates and cycles through flashlight modes.
- 12V Override Button: For manually selecting 12V jump start mode.
- 24V Override Button: For manually selecting 24V jump start mode.
- DC 29V5A Input Port: For charging the jump starter using the AC adapter.
- USB-C Input Port: For charging the jump starter or other devices.
- USB-A Out Port: For charging external USB devices.
4. Charging the VTOMAN VT-PRO
Before first use, fully charge the jump starter. It takes approximately 1.5 hours to fully charge using the 145W DC adapter, or about 4.5 hours using the USB-C input.
- Connect the 145W AC adapter to the DC 29V5A Input Port on the jump starter, or connect a USB-C cable to the USB-C Input Port.
- Plug the AC adapter into a wall outlet, or connect the USB-C cable to a compatible power source.
- The Battery Level Indicator will show the charging progress. All LEDs will be solid when fully charged.
Image: Fast DC charging of the VTOMAN VT-PRO unit.
5. Operating Instructions
5.1. Jump Starting a Vehicle (12V/24V)
The VTOMAN VT-PRO is equipped with a 10 Intelligent Protection System for safe operation, including Over-Charge, Short-Circuit, Spark-Proof, Reverse-Polarity, and more.
Image: Overview of the 10 Intelligent Protection System.
- Connect the Jumper Cable Correctly:
- Connect the red clamp (+) to the positive terminal of the vehicle battery.
- Connect the black clamp (-) to the negative terminal of the vehicle battery.
- Ensure a secure connection.
- Select Voltage Mode:
- The 12V or 24V LED indicator on the jump starter will flash or turn solid, indicating the detected voltage.
- If the vehicle battery voltage dropped in 12V/24V and the unit cannot jump start, press and hold the corresponding 12V or 24V override button for 2 seconds. The LED will turn solid.
- Start the Vehicle:
- Once the correct voltage mode is indicated, start your vehicle's engine.
- If the vehicle does not start immediately, wait a few minutes before trying again. Do not crank for more than 3 seconds.
- Remove the Clamps:
- Once the vehicle starts, remove the black clamp (-) first, then the red clamp (+).
- Store the jump starter safely.
Image: Visual guide for jump starting a vehicle.
5.2. Using as a Portable Power Bank
The VTOMAN VT-PRO can charge various electronic devices:
- USB-A Out Ports: Connect your USB devices (e.g., smartphones, tablets) to the USB-A Out ports (5V-2.4A; 5V-1A) using a compatible USB cable.
- USB-C Input Port: This port can also be used for output to charge compatible devices (5V=2A; 9V=2A).
Image: VTOMAN VT-PRO functioning as a portable power bank.
5.3. LED Flashlight Operation
The built-in LED flashlight has three modes:
- Press the Flashlight Button once to turn on the flashlight (Lighting mode).
- Press again for Strobe mode.
- Press a third time for SOS mode.
- Press a fourth time to turn off the flashlight.
Image: Illustration of the VTOMAN VT-PRO's LED flashlight modes.
6. Safety Precautions
Failure to follow these safety instructions may result in electric shock, explosion, fire, or other serious injury.
- Do Not Submerge In Water.
- Do Not Disassemble the unit.
- Do Not Drop the unit.
- Avoid Extreme Temperatures (Operating temperature: -40℃ to 60℃ / -40°F to 140°F).
- Do Not Place Near or Into Fire.
- Ensure proper connection to avoid reverse polarity.
- Use only the provided or recommended charging accessories.
- Keep out of reach of children.
- If the unit is hot, allow it to cool down before use or charging.
7. Maintenance and Storage
- Store the jump starter in a cool, dry place away from direct sunlight.
- Recharge the unit every 3-6 months to maintain battery health, even if not in use.
- Clean the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
- Keep the battery clamps clean and free of corrosion.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| The unit can not be active by pressing any buttons. | Over-discharge protection may be activated. | Please recharge the unit. If still cannot activate after recharging, contact after-sales service. |
| The unit can not be recharging. | 1. No power from AC adaptor or USB port. 2. Faulty USB cable. |
1. Please change AC adaptor or plug into a different USB outlet. 2. Replace USB cable. If still cannot charge, contact after-sales service. |
| The 12V/24V LED flashing or solid on but it still can not jump start the vehicle. | 1. The vehicle battery voltage dropped in 12V/24V. 2. Mechanical issue with vehicle. |
1. For specific operations, please refer to the boost mode (Section 5.1). 2. Please ask a car service or professional for help. |
| RED warning light flashing. | Over-temperature protection is activated. | Stop to use and wait for the unit to cool down. |
| The 25%/50%/75% three LEDs flashing together when recharging the unit. | Internal battery temperature is too low, the recharge is forbidden. | Move to room temperature area, and recharge it after the internal battery warmed up. |
| 25%/50% two LEDs or 50%/75% two LEDs flashing together when recharging the unit. | The adapter is not original, and the voltage or current does not match. | Please use the original adapter to charge the product. |
| 25% one LED fast flashing. | Internal battery over-discharged. | Please contact with after-sales service if the unit is still in warranty time, or purchase a new one. |
9. Technical Specifications
| Feature | Specification |
|---|---|
| Model No. | JS-373 |
| Dimension | 290*207.6*180mm |
| Weight | 4300±50g (4.3kg) |
| Battery Capacity | 58800mAh (215.8Wh) |
| Output | 2x USB-A (5V-2.4A; 5V-1A); 12V/24V Jump Start; 3W LED Flashlight |
| Input | DC (29V-5A); USB-C (5V=2A; 9V=2A) |
| Full Charge Time | About 1.5 hours (DC 29V-5A) / About 4.5 hours (USB-C) |
| Peak Current | 10000A |
| Operating Temperature | -40℃ to 60℃ / -40°F to 140°F |
| Battery Type | LiFePO4 |
| Certification | CE, FCC, RoHS, WEEE, UL |
Image: Technical specifications and quick reference guide.
10. User Tips
- Ensure the unit is fully charged before any critical use, especially for jump-starting.
- While the advertised capacity is 58800mAh, some users have noted the actual usable capacity might be closer to 8400mAh based on internal battery configuration (7 lithium-ion batteries, 4V and 8.4Ah each, connected in series). This is common for jump starters where the mAh rating refers to the sum of internal cells, not necessarily the output capacity at 12V.
- Always double-check the clamp connections to the battery terminals to prevent sparks and ensure effective jump-starting.
- If the unit doesn't seem to be charging, try a different AC adapter or USB outlet, and ensure the charging cable is not faulty.
11. Warranty and Support
The VTOMAN VT-PRO comes with:
- 18-Month Limited Warranty Service
- Lifetime Technical Service
For any inquiries or support, please feel free to contact VTOMAN:
- Email: Support@vtoman.com
- US Phone: 1-888-818-9811 (Mon. - Fri. 9 am - 5 pm PST)
VTOMAN has switched to a digital version of the manual to reduce paper usage and support environmental sustainability. You can scan the QR code in the Quick Reference Guide image for detailed instructions, or access the PDF directly at VTOMAN VT-PRO User Manual (PDF).