AZDOME M550 Pro-2CH

Contents

AZDOME M550 Pro-2CH 4K+2.5K Dash Cam User Manual

Model: M550 Pro-2CH

Brand: AZDOME

1. Introduction

Thank you for purchasing this AZDOME dashcam. This instruction manual contains information on how to operate your dashcam. Before using your dashcam, we recommend that you read through this manual to ensure correct usage. To improve the performance of the product, the contents of this manual are subject to change without prior notice. Please read and understand the manual before operating.

  • Please ALWAYS connect with power when using.
  • The AZDOME M550 Pro comes with an AZDOME 64GB memory card in the package. Please format your memory card before first use to ensure better recording.

View User Manual (PDF)

2. What's Included

The package contains the following accessories. If any accessories are missing, please contact customer support.

AZDOME M550 Pro-2CH Dash Cam package contents

Image: AZDOME M550 Pro-2CH Dash Cam and accessories including front camera, rear camera, car charger, USB cable, electrostatic films, cable clips, pry tool, 64GB SD card, and user manual.

  • Front Dash Cam
  • 2.5K Rear Camera
  • Type-C USB Car Charger
  • Electrostatic films (x4)
  • Cable Clips (x5)
  • Pry Tool
  • 64GB SD Card
  • User Manual

PLEASE NOTE:

M550 Pro comes with a 64GB SD card. The M550 Pro dash cam supports memory cards of up to 256GB. We recommend using a Class 10, U3, A2 Speed Micro-SD memory card. Unqualified memory cards may cause the machine to restart repeatedly or incomplete recordings. Please format your memory card before first use to ensure better recording.

3. Product Overview

3.1. Product Diagram

Diagram of AZDOME M550 Pro-2CH Dash Cam with labeled parts

Image: Various views of the dash cam with numbered callouts for components like screen, mounting bracket, power button, MIC, SD card slot, rear camera connection, etc.

No.ComponentNo.Component
①Screen⑥Down Button
②Mounting bracket⑦Mode Button
③Power Button⑧MIC
④UP Button⑨Reset Button
⑤OK Button⑩Speaker
⑪Type-C charging port⑫Rear camera connection port
⑬SD card slot⑭Rear camera
⑮Type-C connection port for cabin camera

3.2. Button Functions

KeyFunctions
Power Supply5V/2.5A
Power Button
  • Shutdown state: Press and hold to turn on; indicator light turns on.
  • Startup state: Press and hold to turn off; indicator light turns off.
  • Startup state: Briefly press to turn screen off/on.
Up Button
  • In menu mode: Select up.
  • In playback mode: Select up.
OK Button
  • In recording mode: Short press to start/stop recording.
  • In menu mode: Set confirmation key.
  • In playback mode: Short press to play/pause files.
Down Button
  • Menu mode/playback mode: Short press to select down.
  • Recording mode (in recording status): Short press to lock the video.
Mode Button
  • Recording mode: Press once to switch to settings.
  • Menu mode: Press once to return to the previous interface.

4. Setup and Installation

4.1. Installation Steps

Video: Product overview and installation guide for the AZDOME M550 Pro-2CH Dash Cam.

QR code to watch installation video

Scan QR code to watch the installation video.

  1. Install the front camera at the top of the front windshield. Remove any foreign matter, and clean and dry the windshield before installation. Install the rear camera at the top of the rear windshield.
  2. Correctly connect the magnetic bracket and M550 Pro dash cam through the strong magnetic attraction.
  3. Insert the microSD card into the microSD slot of the dash cam and format your SD card for the first time use.
  4. Stick the electrostatic film on your windshield, then stick the magnetic bracket on the middle of the electrostatic film.
  5. Turn off the car engine.
  6. Connect the charging cable to the Type-C port of the magnetic bracket. Use the pry tool to lift the edges of the windshield trim/molding and tuck in the power cord.
  7. Adjust the angle of the lens by the bracket of the front camera. We recommend pointing the lens slightly downwards (≈10° below horizontal), so as to record video with a 6:4 road to background ratio.
  8. Peel off the protective film from the double-sided tape and attach the rear camera to the rear windshield. Adjust the angle of the lens by rotating the body of the rear camera, connect the front camera and the rear camera.
  9. Use the pry tool to lift the edges of the rubber window sealing and molding and tuck in the rear camera connection cable.
  10. Plug the cigarette lighter power cable into the cigarette lighter socket and the front camera. Use the pry tool to lift the edges of the windshield trim/molding and tuck in the power cord.

Note: The length of the original cable for the rear camera is 6m/20ft, suitable for most types of cars. A 4 Pin rear camera Extension Cable is not included. Search for "Extension Cable for M550 Pro" on Amazon if needed.

5. Operating Instructions

5.1. First Time Use

  1. For the longevity of the machine, please use the car charger included in our package and ensure that the output power can reach 5V/2.5A. Unstable power supply or insufficient input current will cause the machine to automatically switch on or off or not turn on.
  2. Please insert the memory card in the correct direction. PLEASE NOTE: AZDOME M550 Pro comes with an AZDOME 64GB memory card in the package. We recommend using a Class 10, U3, A2 Speed Micro-SD memory card. M550 Pro dash cam supports memory cards of up to 256GB. Unqualified memory cards may cause the machine to restart repeatedly or incomplete recordings. Please format your memory card before first use to ensure better recording.
  3. After confirming that the power supply and rear camera are correctly connected and the memory card has been inserted into the machine, you can turn on the machine and use it. (Removing accessories during the startup process will cause the machine to shut down).
  4. Click the "M" button > Time Zone Selection > Select local time zone.

After completing the above settings, you can pre-set the dash cam according to your driving habits.

5.2. Formatting Micro-SD Card

A. Formatting by the Dash Cam

  • Click the "M" button > System Settings > SD Card Formatting > OK.

B. Formatting by the AZDOME APP

  1. Install the AZDOME App.
  2. Connect to the dash cam via Wi-Fi.
  3. Access the real-time preview page.
  4. Pause the recording, then tap the settings button in the upper right corner of the live preview page.
  5. In the settings menu, find the option to format the SD card. Select it and confirm the operation.
  6. Wait for the formatting to complete. You will hear a prompt indicating that the formatting is successful.

5.3. Connecting to AZDOME APP

  1. Search for the AZDOME App in the Google Play Store or Apple App Store and install it on your smartphone.
AZDOME App download QR codes for Google Play and App Store

Image: Screenshots showing the AZDOME app interface for WiFi connection and dashcam selection.

  1. Turn on the WiFi of the dash cam: Click the “M” button > System Settings > Wi-Fi Info > Wi-Fi Switch > On. PLEASE NOTE: Some mobile phones do not support 5G WiFi. If you cannot find the WiFi of our dash cam in the WiFi list, please try to switch to 2.4G WiFi. (Click the “M” button > System Settings > Wi-Fi Band > 2.4GHz/ 5.8GHz).
  2. Please connect to our dash cam's WiFi on your mobile phone before opening the AZDOME APP. WiFi Name SSID: AZDOME_M550Pro_********** Default Password: 12345678.
  3. After installing the AZDOME App, please register with your email on the registration screen to log in. If you are unable to receive the verification code, click “Skip Login” in the top right corner to enter the next page and click “Add Dashcam”. PLEASE NOTE: If you encounter any problems during use, you can find us through the customer service window in the lower right corner.
  4. Select your dash cam type.
  5. Select "Dashcam installed and powered on” and click “Next”.
  6. Select "Wi-Fi connected" and click "Next".
  7. After selecting your model, you can set up the dash cam and view recorded videos through the APP.

5.4. How to View Video on Mobile Phone

AZDOME App interface for viewing videos

Image: Screenshots showing the AZDOME app's local album and live video preview with GPS tracking.

  • The Local album on the home page allows you to view locally downloaded videos.
  • The Playback album for real-time preview allows you to view videos stored in the memory card (not saved on the user's phone).
  • You can select the videos you need to view through the preview interface.

5.5. How to View Video on Dash Cam

  1. Click the “M” button > File Explorer > to enter the playback mode.
  2. Select the file you want to view: Video_Front, Video_Front_Lock, Image_Front, Video_Back, Video_Back_Lock, Image_Back.
  3. Click to view the video you want to view.
  4. Click the “M” button > Return to previous level.

5.6. How to View Video on Computer

The GPS Player enables display of traveling track information when playing a video.

  1. Please remove the Micro SD Card from the camera and connect the Micro SD Card to the computer via a card reader.
  2. Go to the AZDOME website: https://www.azdomevip.com/pages/download-app to download the AZDOME Player (For Windows 32bits/64bits or macOS). You can also click on the "GPS_Player" file in your memory card directory to copy the download address.

PLEASE NOTE:

Please close or ignore the prompt of the anti-virus software, we confirm that it will not bring any security impact to your computer.

  1. After installation, there are two methods to play the video files.

Method 1:

Click the File-Open icon to choose the folder which you want to play, click to start play. (Note that you CANNOT see any video files, please select a whole folder Normal or Event to play.)

Method 2:

Select from “PC” and find the memory card disk. Double click in it, then you will see the file AZDOME folder.

  • Standard Video: Normally recorded video. When loop recording mode is turned on, the latest video will replace the oldest video when the memory card is full.
  • Locked Video: Video locked when the G-sensor senses a collision/Video locked manually by the user through voice control or touch. When loop recording mode is turned on, the locked video will not be replaced by the latest video when the memory card is full.
  • Photo: Photos taken by users through voice control or touch.

Choose one video file you want to play, you can drag and drop the file directly to the player. You can get the GPS information on the player.

Note:

Please do not delete the gps_data folder, as this will affect the GPS data in the video!

6. Dash Cam Settings

  • Record Resolution:
    • Front+Rear: 4K+2.5K (Default), 2.5K+2.5K, 1080P+2.5K
    • Front: 4K(3840x2160P) (Default), 2.5K(2560×1440P), 1080P(1920×1080P)
  • Loop Recording: 1 Minute/ 2 Minutes/ 3 Minutes. Enables continuous recording. When the memory card is full, the oldest files are automatically deleted.
  • Light Source Frequency: 50Hz (Default)/ 60Hz. Choose based on your region (50Hz for Europe, Asia, Africa; 60Hz for North America, South America, some Asian countries).
  • G-sensor: Closed/ Low/ Medium (Default)/ High. Select appropriate sensitivity for driving conditions.
  • Time-Lapse Recording: Closed (Default)/ 1 FPS/ 2 FPS/ 3 FPS. Only visible when connected to a 3-lead hardwire kit.
  • Audio: OFF/ ON (Default).
  • Date & Time Stamp: OFF/ ON (Default).
  • Speed Stamp: OFF/ ON (Default).
  • GPS Stamp: OFF/ ON (Default).
  • Logo Stamp: OFF/ ON (Default).
  • Rear Camera Display: Closed, Flip, Mirror (Default), Flip & Mirror.
  • Volume Settings: 0/ 1/ 2/ 3 (Default)/ 4.
  • Key Tone: OFF/ ON (Default).
  • Screen Saver: Closed (Default)/ 1 Minute/ 3 Minutes. Screen turns off after inactivity, but recording continues.
  • Speed Units: KM/H, MPH (Default).
  • Time Zone Selection: GMT-08:00 (Default). Adjust for local time. Applied upon GPS connection.
  • Language Settings: English (Default), 简体中文, 繁體中文, Deutsch, italiano, Español, Русский, Français, العربية, Português.
  • Satellite Information: Check GPS status, latitude, and longitude.
  • Wi-Fi Band: 2.4GHz/ 5.8GHz (Default).
  • Wi-Fi Info: OFF/ ON (Default). SSID: AZDOME-M550Pro-6C6403, PWD: 12345678.
  • Voice Control: Closed/ Open (Default). Voice commands include: Turn on WiFi, Turn off WiFi, Take Picture, Lock the Video, Turn on Screen, Turn off Screen, Show Front Camera, Show Rear Camera, Turn on Audio, Turn off Audio.
  • Date & Time Settings: YY-MM-DD/ DD-MM-YY/ MM-DD-YY (Default).
  • SD Card Formatting: OK/ Cancel. Erases all data on the memory card.

6.1. Smart Driving Features (ADAS)

ADAS (Advanced Driver Assistance Systems) is an intelligent driving assistance feature that leverages advanced technologies like computer vision, machine, and artificial intelligence. It analyzes road conditions to provide real-time warnings and alerts, helping to prevent accidents and enhance driving safety.

ADAS Powered features diagram

Image: Diagram illustrating the 5 ADAS features: Forward Collision Warning, Pedestrian Collision Warning, Lane Departure Warning, Close Distance Warning, and Front Vehicle Start Warning.

Calibrate: ADAS > CALIBRATE - OFF (Default)/ ON

It offers 5 essential ADAS features:

  • Forward Collision Warning: Warns drivers of potential collisions with vehicles or obstacles ahead.
  • Lane Departure Warning: Alerts drivers when the vehicle drifts out of its lane without signaling.
  • Pedestrian Collision Warning: Alerts drivers of potential collisions with pedestrians ahead.
  • Front Vehicle Start Warning: Warns the driver of a sudden start or movement of a stationary vehicle ahead.
  • Close Distance Warning: Alerts drivers when the following distance to the vehicle ahead becomes unsafe.

ADAS Setting

  • Forward Collision Warning - Closed/ Low/ Medium (Default)/ High
  • Lane Departure Warning - Closed / Low/ Medium (Default)/ High
  • Pedestrian Collision Warning - Closed/ Low/ Medium (Default)/ High
  • Front Vehicle start Warning - Closed/ Low/ Medium (Default)/ High
  • Close Distance Warning - Closed/ Low/ Medium (Default)/ High
  • Alarm Prompt Tone - Closed/ Open (Default)
  • Alarm Area Display - Closed/ Open (Default)

6.2. Blind Spot Detection (BSD) & Lane Change Assist (LCA)

Calibrate: BSD & LCA > CALIBRATE - OFF (Default)/ ON

BSD (Blind Spot Detection System) uses sensors to monitor blind spots on both sides and behind the vehicle in real time. When a vehicle enters the blind spot, it alerts the driver with warning lights and audible alerts.

LCA (Lane Change Assist System) is an extension of BSD. When the driver signals to change lanes, it assesses the situation of vehicles in adjacent lanes and uses stronger warnings or even steering intervention to prevent unsafe lane changes. Together, they reduce the risk of lane changes.

BSD & LCA > SETTING

  • Alarm Sensitivity: Low/ Medium (Default)/ High
  • Speed Threshold: 0km/h, 30km/h (Default), 50km/h, 80km/h, 100km/h
  • Alarm Prompt Tone: Closed/ Open (Default)
  • Alarm Area Display: Closed/ Open (Default)

7. Firmware Update

When the camera doesn't respond to your operation and resetting doesn't help, it's useful to update to the latest firmware.

  1. Format Micro-SD Card. You can do this by going into the camera's system settings. PLEASE NOTE: Make sure to backup your recordings if you need them before formatting the Micro-SD Card.
  2. Insert the card into the Micro SD Card reader and connect it to a computer.
  3. According to the original firmware version in your dash cam, choose the correct firmware to download it from the AZDOME official website: https://www.azdomevip.com > Support > Download > AZDOME Firmware > M550 Pro Firmware.
  4. Please unzip the firmware package and cut all the files in the folder to the root directory of the memory card. After inserting the memory card and turning on the power, the dash cam will start to upgrade the new firmware.

8. Troubleshooting

  • Camera turns ON/OFF automatically?

    Ensure that the output current can reach 5V/2.5A and use the provided car charger. Ensure the rear camera is connected correctly. The dashcam reboots automatically if it detects different cameras connected to improve stability.

  • The power is on, but cannot be turned on?

    If the dash cam does not function normally, try restarting it. To restart, press the small “Reset” hole on top of the device next to the USB port with a flattened paper clip.

  • Video does not play smoothly?

    You are viewing high-bit rate video files. General computer configurations may have problems with faster data processing. Record videos at a lower resolution and try again. If this does not solve the problem, please contact customer support at service@azdomevip.com.

  • Device fails to record video or take a picture?

    Plugin the card. If the card is not recognized, unplug it and plug it in again, or clean up any contamination from the card contacts. If not solved, format the memory card in the dash cam.

  • All buttons fail to function?

    Press the Reset Key to restart the device. If not solved, remove the memory card or rear camera to confirm if the accessories have an effect on it.

  • Video Image is blurred?

    Remove the protective lens film, clean the lens, make sure the windshield is clean and clear of grease, dirt, and debris.

  • Camera gets Hot?

    It is normal for your camera to run slightly hot. Due to video being recorded at high speed, the dash cam may be hot during use (Nomore than 158°F/ 70°C).

  • No power to my dash cam but it works upon my computer?

    The cigarette power cable is not working. Inspect the fuse in the Car Power Cable plug. If the fuse is found to be blown, inspect the power cable for damage which may have caused the fuse to blow.

  • The sound is not synchronized with video during playback?

    The Codecs on your PC may not be compatible or the latest standard. Download the latest AZDOME GPS Player from www.azdomes.com > Support > Downloads.

  • Video Files cannot be played on my computer?

    The video files from the Dash Cam are in MP4 format and may not be compatible with your PC if suitable playback software is not installed.

  • Photograph is blurred?

    The Dash Cam has a minimum focal range of around 2 meters. Objects closer than this are likely to become blurred. LONG PRESS for 2-Seconds to Take Snap.

  • Camera showing “Memory Error"?

    Using unqualified SD or third-party cards can affect the dashcam's performance and in some cases, force the dashcam to reboot randomly during recording. If it still cannot work normally, it should be that the TF card is unqualified and can not meet the recording requirements of the dash cam. Please contact us to get a new memory card.

  • Video has no sound?

    Ensure that “Sound Recording” function is turned ON. Ensure that "Time Lapse Parking Mode” setting is turned OFF within the Menu.

9. Maintenance

  • Regular SD Card Formatting: Periodically reformat the memory card (every 2-3 weeks is recommended). As formatting the card will remove all content, first download any files you wish to keep.
  • Cleaning: Only clean the device with a soft dry cloth. For tough dirt, apply some neutral detergent diluted in 5 to 6 parts water to a soft cloth. Avoid alcohol, thinner, benzene, etc., as they could cause damage.
  • Lens Care: Avoid making direct contact with the lens. If required, clean the glass lens carefully using spectacle lens cleaning fluid on a soft cloth only.
  • Temperature: The dash cam is designed to operate in temperatures from -20℃ to 70℃ (-4°F to 158°F).

10. Specifications

AttributeValue
ModelM550 Pro
Screen Size3.19 Inch
ApertureF=1.8
ColorBlack
LanguageArabic, Chinese (Simplified), Chinese (Traditional), English, French, German, Portuguese, Russian, Spanish
Video FormatMP4
Photo FormatJPG
Video CodeH.264
Record Resolution (Front+Rear)4K+2.5K (Default), 2.5K+2.5K, 1080P+2.5K
Record Resolution (Front)4K(3840x2160P) (Default), 2.5K(2560×1440P), 1080P(1920×1080P)
ADAS FunctionsForward Collision Warning, Lane Departure Warning, Pedestrian Collision Warning, Front Vehicle Start Warning, Close Distance Warning
G-sensorBuilt-in 3-Axis Acceleration Sensor
Loop RecordingSupport
Parking ModeSupport (ONLY works when connected to 3-Lead Hardwire Kit)
MemoryMax support 256GB (Class 10, U3 Speed)
GPSBuilt-in
MicrophoneBuilt-in
SpeakerBuilt-in
Power Interface5V/ 2.5A
Working Temperature-20℃ to 70℃ (-4°F to 158°F)
Cable Length6m
Weight0.6KG
Power SourceCorded Electric
APP CompatibilityAPP Control
Built-in ScreenYes
NightShot FunctionYes
Rear CameraYes
Original PackageYes
Touch ScreenNo
Screen Ratio16:9
Memory Card Required Reading SpeedClass 10
View angle150°
Camera Resolution3840x2160
Is Batteries IncludedNo
Max External Memory256G
Number Of Lenses2
Imaging SensorGC4653
Pixels800Mega
GPS loggerInternal
BatteryNone (Super Capacitors)
Assembly ModePortable Recorder
Chipset ManufacturerNOVATEK
Frames Per Second25
OriginMainland China
DisplayIPS
Accessory Type64GB TF Card+ Charger+ cable+ Crowbar
Item TypeCar DVR
CertificationCE, FCC, RoHS, WEEE
Battery Capacity(mAh)NO (Super Capacitors)
InterfaceAV-In, USB 2.0, Wi-fi, Micro SD/TF

11. User Tips

  • Always ensure the dash cam is connected to a stable power source (5V/2.5A car charger) to prevent automatic shutdowns or restarts.
  • Regularly format your Micro-SD card (every 2-3 weeks) to maintain optimal recording performance and prevent data corruption. Remember to back up important files before formatting.
  • For optimal GPS tracking and app connectivity, ensure your phone's cellular data and VPN are turned off when connecting to the dash cam's Wi-Fi.
  • If experiencing blurred images, check and clean the lens and ensure the windshield is clear.
  • Consider using a 3-lead hardwire kit for continuous 24-hour parking monitoring features like collision detection and time-lapse recording.

12. Warranty and Support

AZDOME offers a 1-year warranty for this product. For any operational problems or support inquiries, please contact AZDOME customer service.

13. Important Safety Information

Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem.

  • Please only use the AZDOME car charger included in this package.
  • Be sure to format your microSD card with your dashcam for the first time use. Periodically reformat the memory card. Every 2-3 weeks we recommend that you reformat the memory card. As formatting the card will remove all content, first download any files from the card that you may want to keep.
  • Do not remove or insert the memory card when the Stream Dash Camera is turned on. This may damage the memory card.
  • Do not remove or insert GPS or rear camera when the Stream Dash Camera is turned on. This may damage the camera.
  • The camera is designed to power up and record automatically when it receives power. Then saves the video record and turns off automatically when the car shuts off.
  • Please MAKE SURE to connect all cameras and wires BEFORE power ON the Mirror Screen, otherwise, the camera cannot work properly.
  • Improper installation will void the manufacturer's warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system.
  • Consult an experienced technician if you are not comfortable installing the product.
  • Do not expose this product to rain, moisture or water under any circumstances, doing so may result in the risk of electric shock or fire.
  • Do not obscure the view of the road ahead or impede the deployment of any airbags in the event of an accident.
  • Only clean the device with a soft dry cloth, for tough dirt, apply some neutral detergent diluted in 5 to 6 parts water to a soft cloth.
  • Note that alcohol, thinner, benzene etc could cause damage to the paint or coatings.
  • Avoid making contact with the Lens as damage may be caused.
  • If required clean the glass lens carefully using spectacle lens cleaning fluid on a soft cloth only.
  • The video recordings made by this Digital Video Recorder are intended for personal use only.
  • Whilst driving, do not adjust the controls of your device as this is a distraction to driving.

13.1. Regulatory Compliance

CE Notice

This product complies with the radio interface requirements of the European Community.

Disposal Information

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate recycling facility to protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

FCC Notice

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

Battery Warning

WARNING: INGESTION HAZARD - This product contains a button/coin battery.

If swallowed, the battery can cause severe internal burns or death within 2 hours. Keep new and used batteries away from children. Immediate action required if ingested: Seek emergency medical help. This product complies with ANSI/ UL 4200A-2023 safety standards. Do not discard with household waste.

*(Label conforms to 16 CFR Part: 1263 requirements, high-contrast English warnings with safety symbol and signal word “WARNING”.)*

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.