Introduction
Thank you for choosing the Ugreen Robot Power Bank. This portable charger is designed to provide efficient and convenient power on the go for your electronic devices. Featuring a 10,000mAh capacity, 30W bidirectional fast charging, a clear TFT digital display, and broad compatibility, it ensures your devices stay powered throughout the day.

Figure 1: Ugreen Robot Power Bank with built-in USB-C cable.
Package Contents
- Ugreen Robot Power Bank (10,000mAh)
- User Manual
- (Note: Charging cable for the power bank itself is built-in USB-C. Additional cables for other devices may be required.)
Setup
1. Initial Charging of the Power Bank
Before first use, it is recommended to fully charge your Ugreen Robot Power Bank. Use the built-in USB-C cable or a separate USB-C cable to connect the power bank to a compatible USB power adapter (not included).
- Connect the built-in USB-C cable or an external USB-C cable to the power bank's USB-C port.
- Plug the other end into a USB wall charger.
- The TFT digital display will show the charging status and battery level.
- A full charge typically takes several hours.
2. Connecting Devices for Charging
The power bank offers multiple charging options:
- Using the Built-in USB-C Cable: Extend the integrated USB-C cable and plug it directly into your USB-C compatible device.
- Using the USB-A Port: Connect your device's USB-A charging cable to the power bank's USB-A output port.
- Using the USB-C Port: Connect your device's USB-C charging cable to the power bank's USB-C output port.
The power bank can charge up to three devices simultaneously using its built-in USB-C cable, USB-A port, and USB-C port.
Operating Instructions
1. Charging Your Devices
Once your device is connected, the power bank will automatically begin charging. The 30W bidirectional fast charging feature allows for rapid power delivery to compatible devices.

Figure 2: 30W Bidirectional Fast Charging in action.
2. TFT Digital Display
The integrated TFT digital display provides real-time information about the power bank's status, including:
- Remaining battery percentage.
- Charging status (input/output).
- Vivid and interesting expressions that indicate operational status.
3. Small Current Mode
For low-power devices such as wireless earbuds (AirPods) or smartwatches, activate the small current mode to ensure safe and optimized charging. Refer to the power bank's physical button or specific instructions for activating this mode (details not provided in source, assume standard power bank operation).
4. Compatibility
The Ugreen Robot Power Bank is widely compatible with various devices:
- Smartphones: iPhone 16/15/14/13/12/11 series, Samsung S24/S23/A52/A32/Z Fold/Z Flip series, Google Pixel series, and other Android phones.
- Tablets: Various models compatible with USB-C or USB-A charging.
- Small Devices: AirPods, Smartwatches (use Small Current Mode).
Note: For iPhone 8-14 Series, please use a C-L (USB-C to Lightning) charging cable.

Figure 3: Wide Compatibility with various devices.

Figure 4: 10,000mAh capacity provides multiple charges for modern smartphones.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the power bank. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the power bank in a cool, dry place away from direct sunlight, extreme temperatures, and humidity.
- Battery Care: To prolong battery life, avoid fully discharging the power bank frequently. Recharge it when the battery level is low.
- Protection: The power bank features 13 levels of protection to ensure safe operation.

Figure 5: The power bank incorporates 13 levels of protection for safety.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging | Cable not connected properly; faulty charger/cable; power bank fully discharged. | Ensure all connections are secure. Try a different USB wall charger and/or cable. Allow a few minutes for the power bank to respond if deeply discharged. |
| Device not charging from power bank | Device cable not connected properly; power bank battery empty; device incompatible; small current mode not activated for low-power devices. | Check cable connections. Recharge the power bank. Ensure your device is compatible. Activate small current mode for low-power devices. |
| Slow charging | Non-fast charging cable/adapter; device not supporting fast charging; multiple devices charging simultaneously. | Use a fast-charging compatible cable and adapter. Ensure your device supports 30W fast charging. Charging multiple devices may reduce individual charging speeds. |
| TFT display not working | Power bank off; software glitch. | Press the power button to activate the display. If the issue persists, try fully discharging and recharging the power bank. |
Specifications
| Feature | Detail |
|---|---|
| Model | Robot Power Bank |
| Capacity | 10,000mAh |
| Max Output Power | 30W |
| Input Interface | USB-C (Bidirectional) |
| Output Interfaces | Built-in USB-C cable, USB-A port, USB-C port |
| Battery Type | Lithium Ion Battery |
| Shell Material | Plastic |
| Features | Built-in Cables, TFT Screen, 13 Levels of Protection |
| Dimensions (approx.) | 4.5 x 2.7 x 0.7 inches |
User Tips
- Optimal Charging: For the fastest charging experience, ensure both your device and charging cable support 30W USB Power Delivery (PD).
- Cable Management: The built-in USB-C cable is convenient, but remember to retract it properly after use to prevent damage.
- Monitor Display: Pay attention to the TFT display for accurate battery levels, especially before long trips, to avoid running out of power unexpectedly.
- Small Device Charging: Always use the dedicated small current mode when charging low-power devices like earbuds or smartwatches to prevent overcharging or damage.
Warranty and Support
For warranty information, technical support, or any product-related inquiries, please refer to the official UGREEN website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.