ESSGOO 9-inch Android 15 Car Stereo Radio

Contents

ESSGOO 9-inch Android 15 Car Stereo Radio

User Manual

1. Safety Information

1.1. Tips and Warnings

In order to emphasize the important information of the user manual, special attention should be paid when seeing the label ⚠, which indicates some important warnings and reminders.

1.2. Important Tips

  • Please read all instructions before installation. It is recommended that the machine be installed by a car audio professional.
  • ⚠ This machine is suitable for vehicle 12V power supply system (grounding wire is required). Please do not install this machine in 24V vehicle, otherwise it will damage the machine.
  • Do not repair the power fuse without professional guidance. Improper use of the fuse can cause damage to the machine or cause a fire.
  • To avoid violating traffic rules, drivers cannot watch videos while driving and operating machines to avoid unnecessary accidents.
  • For the sake of safety and to ensure the normal use of the product, please invite professionals to install, disassemble or repair the machine to avoid machine damage and accidents.
  • Please avoid placing this product in a humid environment and water to avoid fire due to electric shock or other unnecessary damage.

Note: To prevent burning out the machine, please do not energize until you have connected the power cord correctly! The product contains small parts. Keep out of reach of children to prevent swallowing!

2. Package Contents

The ESSGOO 9-inch Android 15 Car Stereo Radio package includes the following items:

  • 1 x 2 DIN car radio
  • 1 x radio frame
  • 1 x GPS antenna
  • 1 x power cable
  • 1 x RCA connection cable
  • 1 x CAN bus box
  • 1 x radio antenna adapter
  • 1 x reversing camera input cable
  • 1 x instruction manual
  • 2 x USB Cable (4Pin/6pin)

Optional accessories (not included in the standard package):

  • DAB+ Adapter
  • AHD Rear View Camera
Package contents of the ESSGOO car stereo, showing the main unit, radio frame, cables, antennas, and manual.

Image: Detailed view of all items included in the ESSGOO car stereo package.

3. Specifications

FeatureSpecification
SystemAndroid 15
Screen9-inch 1280 x 720 HD capacitive touch screen
CPU4x Cortex-A53 1.5GHZ (MT8163 Chipset)
Memory (RAM+ROM)1GB+32GB / 2GB+32GB / 2GB+64GB / 4GB+64GB (optional)
Radio BandFM (87.5M-108M) with RDS (RT, AF, TA)
Output Power4 x 45 watts (Mosfet output stage)
Bluetooth4.1
Audio FormatMP3, FLAC, APE, WMA, WAV, AAC, AMR
Video FormatAVI, ASF, MP4, MOV, MPG, MPEG1/2/4, VOB, MKV, FLV, TS, WMV, RMVB, 3GP
OSD LanguagesEnglish, German, French, Italian, Spanish, Portuguese, Russian, Turkish, Polish
Working Voltage12V
Din SizeDouble Din
InterfaceUSB
CertificationCE, FCC
Quad Core System diagram showing CPU, RAM, and ROM specifications.

Image: Quad Core System details, highlighting CPU, RAM, and ROM.

9 inch HD IPS Display with 1280x720 resolution and 1080P video playback capability.

Image: 9-inch HD IPS Display features, including resolution and video playback.

4. Installation

4.1. Pre-Installation Test

A quick simple test before the installation is to confirm that the device is working normally and as expected. In case there is a wrong step in the subsequent installation, which causes it to fail to work. If you perform a successful test but the unit did not work after installing it please recheck the installation steps.

Test car stereo:

  1. The red and yellow wires of the car stereo combine together firstly and then connected to the positive pole of the 12V battery.
  2. The black wire is connected to the negative pole of the battery.
  3. 2 seconds later, check the car stereo, if the screen is lighting up, it means the car stereo is proper functioning.

4.2. Compatibility Check

This product is specifically designed for Audi A3, S3, and RS3 models from 2003-2013. Please ensure your vehicle's central control unit is compatible with a dual DIN car central control system. If your car's central control unit includes 1DIN standard parts, this product is not suitable.

Compatibility diagram showing 1DIN incompatible and dual DIN compatible Audi central control units.

Image: Visual guide for Audi central control unit compatibility (1DIN vs. dual DIN).

Examples of compatible and incompatible Audi A3 and S3 central control units.

Image: Examples of Audi A3 (2003-2012) and Audi S3 (2006-2012) central control units, indicating compatibility.

Important Note: Please confirm whether your car has a fiber optic power amplifier function. If your car has a fiber optic power amplifier function, it is not compatible with our products and you will need to purchase additional accessories. If you are unsure, please contact customer service.

Diagram illustrating the need for a fiber optic adapter if no sound is present after installation.

Image: Fiber optic adapter connection note for sound issues after installation.

4.3. Installation Methods

There are three common ways to install the machine. Choose one according to your actual situation. You can also re-install the new radio according to the installation method of the original car radio.

  1. Screw-fixed installation
  2. Card position fixed installation
  3. Special frame fixed installation

4.4. Wiring

Note: The picture is for reference only, please refer to the actual product!

4.4.1. Harness Wiring

Wiring harness diagram for the car stereo.

Image: General wiring harness connections for the car stereo.

4.4.2. Back Interface Diagram

The back panel of the car stereo features various input and output ports:

  1. Power Cable
  2. RCA Input/Output
  3. CANbus serial cable
  4. 2 USB Cable
  5. Camera Input
  6. Radio antenna
  7. GPS Antenna
Back interface diagram showing all connection ports and their labels.

Image: Detailed diagram of the car stereo's back panel and its interfaces.

4.4.3. Rear View Camera Wiring (Optional)

NOTE: Whether you are using a rear view camera or not, please connect the rear view wire. Otherwise, your WiFi and Bluetooth signals will suffer!

To wire the rear view camera:

  1. Connect the reversing trigger line (Back (A6)) to the reversing line in the power harness.
  2. Connect the red wire of the camera power cable to the positive pole of the reverse light cable.
  3. Connect the camera power cable to the camera.
  4. Connect the video output from the camera to the Camera Input on the car stereo.
  5. Ensure the camera is properly grounded (Back to GND).
Diagram showing how to connect a backup camera to the car stereo.

Image: Backup Camera Function, illustrating the connection of an optional AHD camera.

5. Operating Instructions

5.1. Icon Introduction

5.1.1. Machine-Host Controls

SymbolOperations & Controls
MICBuilt-in microphone hole
RSTReset (press with a sharp object)
Power ButtonPress and hold for 3 seconds to power off the device. Short press repeatedly to mute or unmute.
Home IconTo main menu
Back IconReturn to the previous interface
Volume UpPress or hold repeatedly to increase volume
Volume DownPress or hold repeatedly to decrease volume

5.1.2. On-Screen Main Interface Icons

Note: The main interface is different for different products, please refer to the specific product.

IconNameOperations
Main Menu IconMain menuTouch to switch screen to main menu
Hide Shortcut Menu IconHide shortcut menuTouch to hide the shortcut menu button area
Backstage IconBackstageTouch to show all programs running in the background
Return IconReturnTouch to switch screens to return to previous screen
Settings IconSettingTouch To Enter Settings
Application IconApplicationTouch To Enter More App Interface
Navigation IconNavigationTouch To Enter Navigation

5.1.3. On-Screen Drop-Down List Icons

IconNameOperations
Wi-Fi IconWi-FiTurn on/off Wi-Fi
Bluetooth IconBluetoothTurn on/off Bluetooth
Screen Off IconScreen offOpen/Close Screen
Screenshot IconScreenshotTouch to take a screenshot
Car Setting IconCar settingTouch to enter Car setting
Clean-up IconClean-upTouch to clean
Video Out IconVideo outTouch to set Video out
Optical IconOPTICALTurn on/off OPTICAL

5.1.4. On-Screen APP Icons

If this APP is included in the product, an additional accessory must be purchased if it is to be used!

IconNameOperations
BT IconBTTouch into bluetooth
ESSGOO Voice IconESSGOO VoiceTouch to enter smart voice settings
ESSGOO+ IconESSGOO +Touch to enter the intelligent voice software
DAB+ IconDAB+Touch to enter DAB+
HERE WeGo IconHERE WeGoTouch to enter offline map
Car Set IconCar setTouch to enter car settings
Car Settings IconCar SettingsTouch to enter settings, enter password 000000 for factory settings
Maps IconMapsTouch to enter google map online
Phonelink/TIMA IconPhonelink/TIMATouch to connect to mobile phone
Video IconVideoTouch to enter video playback
Filemanager IconFilemanagerTouch to enter file management

5.2. Main Interface & Quick Bar

The main interface allows for quick access to frequently used functions. The quick bar can be customized:

  1. Long press an icon to delete it from the quick bar.
  2. Click the '+' sign to add a shortcut.
  3. Up to 5 shortcut icons can be displayed. Swipe left/right to switch if there are more.

5.3. Radio (FM/RDS)

The car stereo supports FM radio with RDS functionality. You can save up to 18 FM radio stations.

FM/RDS Radio interface showing frequency tuning and station presets.

Image: FM/RDS Radio interface with frequency display and station presets.

Radio Data System (RDS) FM Radio interface.

Image: Radio Data System (RDS) FM Radio interface, showing station information.

Radio Icon Function Description:

  • Band Switch: Click to switch radio bands.
  • Mute: Click to mute/unmute audio.
  • Previous Station: Click to switch to the previous station; long press to search upward.
  • Search: Click to search for stations; long press to search and save stations.
  • Next Station: Click to switch to the next station; long press to search downward.
  • Near/Far: Click to switch between near and far stations.
  • Audio Effects: Click to enter the DSP settings interface.
  • RDS: Click to enable RDS functionality.
  • Reception Status: Displays the current radio reception status.
  • Fine Tuning: Click to adjust the reception frequency forward/backward.
  • Station List: Click to switch stations; long press to save the currently playing station.

5.4. Bluetooth Functionality

The unit supports Bluetooth 4.1 for hands-free calling and music playback.

Bluetooth Function interface showing music playback and phone dialer.

Image: Bluetooth Function interface, including music playback and phone dialer.

5.4.1. Bluetooth Connection Interface

Icon Function Description:

  1. Dialing: Click to enter Bluetooth dialing.
  2. Contacts: Click to display the phone's contact list (manual refresh/synchronization required).
  3. Call History: Click to display the current call history.
  4. Pairing Connection: Click to display the connection interface, showing connected and paired devices.
  5. Bluetooth Settings: Click to enter the Bluetooth settings interface.

Bluetooth Phone Operations:

  1. Search: Click to search for nearby Bluetooth devices.
  2. Connect: Click to connect to the currently selected Bluetooth device.
  3. Disconnect: Click to disconnect from the currently connected Bluetooth device.
  4. Delete: Click to disconnect from the currently connected Bluetooth device.

5.4.2. Bluetooth Settings Interface

Icon Function Description:

  1. Auto Answer: Turn on this switch to automatically answer incoming calls.
  2. Auto Connect: Turn on this switch to automatically connect to paired mobile phones.
  3. Bluetooth Network: Turn on this switch to share mobile phone data traffic after connecting to mobile phone Bluetooth. (Click the exclamation mark on the left to view how to turn on mobile phone network sharing.)

5.4.3. Bluetooth Call Interface

Icon Function Description:

  1. Call Switching: Click to switch between car and mobile phone call statuses.
  2. Hang Up: Click to hang up the current call.
  3. Dial: Click to enter the dial interface.

5.4.4. Bluetooth Music

Icon Function Description:

  1. Previous Song: Click to switch to the previous song.
  2. Play/Pause: Click to play/pause music.
  3. Next Song: Click to switch to the next song.

5.5. CarPlay and Android Auto

The unit supports both wireless CarPlay and Android Auto for seamless smartphone integration.

CarPlay & Android Auto interface for Audi A3 2003-2016.

Image: CarPlay & Android Auto interface, showing app integration.

5.5.1. CarPlay Connection

  1. Wireless connection: Turn on Wi-Fi and Bluetooth on your phone. Go to Settings > General > CarPlay > Click Essgoo-BT > Pair > Connect to connect to wireless CarPlay.
  2. Wired connection: Use a phone data cable to connect your phone to the USB port of the installed device. Follow the prompts on your phone to enable CarPlay. (Using the original phone cable is recommended for stable connection).
  3. To enable CarPlay in-car functionality, Siri voice control must be enabled on your phone.
  4. If the CarPlay interface does not appear, click the ZLINK icon on the in-car display screen.

5.5.2. Android Auto Connection

  1. Wireless connection: Turn on your phone's Wi-Fi and Bluetooth settings. Pair with the car's Bluetooth. Follow the prompts on your phone to pair. Confirm to enable Android Auto.
  2. Wired connection: Connect your phone to the USB port of the installed device using a phone data cable. Follow the prompts on your phone to enable Android Auto. (Using the original phone cable is recommended for stable connection).
  3. If the Android Auto interface does not appear on the screen, click the ZLINK icon on the screen.

5.5.3. Important Notes for Wireless Connectivity

  • When using wireless connectivity, Bluetooth on your phone will display as disconnected, and the Wi-Fi switch will show as off. This is normal. The wireless connectivity feature automatically switches to a local area network connection, preventing connection to other Wi-Fi networks.
  • Wireless connectivity is only compatible with navigation, music, and radio apps. It does not support video apps. Compatibility may vary by phone/system manufacturer.
  • Connection methods may vary between Android phone brands due to wide variety and system customization. Follow phone prompts.

5.6. Screen Mirroring

Mirror Link allows you to display your smartphone screen on the car stereo.

Mirror Link interface showing Android and iPhone mirroring capabilities.

Image: Mirror Link interface, demonstrating screen mirroring from Android and iPhone.

5.6.1. Icon Function Description

  1. Mirror: Click to switch to mirror screen projection function.
  2. Settings: Click to enter ZLINK settings, where you can set driver's seat/background connection, etc.

5.6.2. Screen Mirroring Switch

  1. Screen Mirroring Switch: Click to switch between wired and wireless screen mirroring.
  2. Interconnection: Click to switch back to CarPlay/Android Auto mode.

5.6.3. Wireless Screen Mirroring (iOS)

  1. Follow the on-screen prompts to connect to your phone's hotspot and turn on the mirroring switch on your phone.

5.7. DSP (Digital Sound Processor)

The built-in ASP chip supports 32-band EQ setting for customized audio experience.

Icon Function Description:

  1. DSP Switch: Click to enable/disable DSP audio effects.
  2. EQ: Click to switch to the EQ adjustment interface to manually adjust EQ effects.
  3. Sound Effects: Click to switch to the sound effects interface to set surround sound and equalization.
  4. Ultra-Bass: Click to switch to the ultra-bass settings interface.
  5. DSP: Click to switch to the DSP settings interface.
  6. ASP: Click to switch to the ASP interface to select built-in sound effects and manually adjust them.
  7. Balance: Click to switch to the sound field balance settings interface to adjust the listening area.

5.8. Local Media Playback (Music & Videos)

5.8.1. Local Music

Icon Function Description:

  1. Loop Playback: Click to switch between random, sequential, and loop playback.
  2. Previous Track: Click to switch to the previous track.
  3. Play/Pause: Click to play/pause music.
  4. Next Track: Click to switch to the next track.
  5. Playlist: Click to view the music list on your device or USB device.
  6. Sound Effects: Click to enter the DSP settings interface.

5.8.2. Local Videos

Icon Function Description:

  1. Loop Playback: Click to toggle between random, sequential, and loop playback modes.
  2. Aspect Ratio: Click to switch the aspect ratio of the playback screen.
  3. Previous Track: Click to switch to the previous video.
  4. Play/Pause: Click to play or pause the video.
  5. Next Track: Click to switch to the next video.
  6. Playlist: Click to view the video list on the device or USB drive.
  7. Audio Effects: Click to enter the DSP settings interface.

5.9. GPS Navigation

The unit provides accurate GPS positioning and supports both online and offline maps.

GPS Navigation interface showing map applications.

Image: GPS Navigation interface, displaying map applications for guidance.

5.9.1. Google Maps Icon Function Description

  1. Search box: Click to open the search box and pop up keyboard.
  2. Surroundings: Click to display services around your current location.
  3. Type: Click to switch the current map type and route mode.
  4. Location: Click to display your current location.
  5. Navigation: Click to pop up the destination search box.
  6. Personal center: After logging in, you can perform personalized settings.

5.9.2. Waze Icon Function Description

  1. Search box: Click to enter the search box, swipe up to display the quick bar.
  2. Location: Click to display your current location.
  3. Menu: Click to enter the settings.

5.9.3. General Map Navigation Icon Function Description

  1. Search Box: Click to display the keyboard and enter the destination.
  2. Shortcut: You can set the locations of home and company.

5.10. Steering Wheel Controls (SWC)

The unit supports original car steering wheel controls for convenience and safety.

Steering Wheel Controls interface showing button mapping for various functions.

Image: Steering Wheel Controls interface, illustrating how to map buttons to functions.

5.10.1. Operating Instructions for Steering Wheel Button Learning

  1. Control Type: Click to switch to "Learning" mode.
  2. Control: Click to enter the control learning operation interface.
  3. Click on the function icon you wish to learn (e.g., Volume +) on the screen.
  4. Follow the on-screen prompts and press the corresponding button on the steering wheel (e.g., Volume +).
  5. After learning all buttons in sequence, click "Return" to exit and save the settings.

5.10.2. Notes on Steering Wheel Button Learning

  • Switching pull-up resistance: If certain buttons cannot be saved during learning (20K mode) or after learning is complete, click the icon to switch and re-learn the operation.
  • Reset: Click to clear the saved button records.
  • This function is applicable to all models with steering wheel control buttons that do not have CAN-BUS.

5.11. In-Vehicle Settings

5.11.1. Icon Function Description

  1. General Settings: Commonly used functions such as radio, rearview, square control, and reverse assist lines.
  2. Display Settings: Screen saver, wallpaper, brightness, and other function settings.
  3. Sound Settings: Navigation, media, and Bluetooth volume.
  4. Factory Settings: Some less commonly used settings related to the vehicle model CAN-BUS, password is 6 zeros.
  5. System Information: Displays the current host configuration and version information.

5.11.2. Colorful Lights (only available on certain models)

Icon Function Description:

  1. Display: Click to enter the display settings.
  2. Colorful Lights: Click to enter the colorful lights settings interface.

5.12. Touch Calibration

When touch abnormalities occur (e.g., touch deviation, reverse touch, or no touch), follow these steps:

  1. After the car computer has booted up normally, press and hold the touch screen with five fingers.
  2. Wait for 5 seconds, then slightly move your fingers to enter the touch calibration interface.
  3. Follow the on-screen prompts to click the screen cursor in sequence. Once calibration is complete, the system will automatically return to the main interface.

5.13. Theme Selection

  1. Select your preferred theme.
  2. Click OK to switch.

5.14. File Manager

5.14.1. File Copy Method

  1. USB Device: Click to open the USB device and view files.
  2. Select the file to be copied, long-press the file name, and a context menu will appear. Click 'Copy' (icon 4 in the manual) to copy.
  3. Share: Option to share files.
  4. Copy: Option to copy files.
  5. Cut: Option to cut files.
  6. Delete: Option to delete files.
  7. Click the main directory icon to return to the root directory of the file manager.
  8. Select the directory where you want to save the files.
  9. Click "Paste" to copy the files to that directory.

6. Troubleshooting

For common problem solutions, you can scan the QR code provided in the original manual on page 2.

If you encounter issues such as no sound after installation, especially if your Audi has a fiber optic amplifier, you may need to purchase and install a fiber optic adapter. Refer to the installation section for more details.

For specific issues not covered here, please refer to the full user manual PDF or contact customer support.

7. User Tips

  • Always ensure proper wiring, especially the grounding wire, to prevent damage to the unit.
  • For stable CarPlay/Android Auto connections, use original phone data cables.
  • Regularly check for system updates to ensure optimal performance and access to new features.
  • Customize the quick bar with your most used apps for faster access while driving.
  • Utilize the DSP sound settings to tailor the audio output to your personal preferences.

8. Warranty and Support

8.1. Privacy Protection

To learn how your personal information is protected, please visit https://essgoo.com/pages/privacy-policy to read the privacy policy.

8.2. EU Declaration of Conformity

This device complies with the essential requirements and other relevant provisions of Directive 2014/30/EU or Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at https://essgoo.com/pages/doc.

8.3. Manufacturer/Exporter Information

Manufacturer/Exporter: SHEN ZHEN XIN SHENG SHANG TECHNOLOGY CO.,LTD.

Production Site: Room 303, Building 9, No. 54-6, Guanlan Avenue, Xinhe Community, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, China

Official Website: www.essgoo.com

Customer Support: If you have any further questions, please contact the customer service team. The user interface or functions of the product may be changed or updated without notice. It is normal if there are some differences in the manual.

8.4. Full User Manual (PDF)

A comprehensive user manual in PDF format is available for detailed instructions and additional languages. You can view the PDF here: ESSGOO Android Car Media Player Instructions (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.