Hantek TO1112C

Contents

Hantek TO1112C Multi-Functional Touch Screen Digital Oscilloscope User Manual

Model: TO1112C | Brand: Hantek

1. Introduction

Thank you for purchasing the Hantek TO1112C Multi-Functional Touch Screen Digital Oscilloscope. This device is part of the new generation TO1000 series, designed to be thin, lightweight, and easy to carry. It features a unique hanging design for hands-free operation, offering anti-falling and anti-seismic durability. The TO1112C integrates multiple functions including an oscilloscope, multimeter, signal generator, and spectrum analyzer. It is equipped with a super large capacity battery for long endurance and supports fast charging.

This manual serves as a universal guide. For detailed technical specifications, specific model manuals, or software, please contact customer support.

2. Safety Warnings

Before using this product, please read and comply with all safety instructions to prevent injury or damage to the device.

2.1 Electrical Safety

  • Use only the power adapter provided with the product or a compliant power supply.
  • Do not use in humid environments unless the product specifically states a waterproof rating.
  • If the power cord is damaged, discontinue use immediately and contact customer support for a replacement.
  • Always disconnect the power before cleaning.

2.2 Usage Environment

  • Operating temperature range: -10°C to 40°C (subject to model specifications).
  • Avoid direct sunlight, high temperatures, and dusty environments.
  • Ensure good ventilation and do not block heat dissipation holes.

2.3 Operational Safety

  • Do not disassemble or modify the product yourself, as there are no user-repairable parts inside.
  • Prevent liquid from entering the product interior.
  • If the product emits smoke, unusual odors, or abnormal noise, immediately disconnect the power and contact after-sales service.

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact customer support immediately.

Hantek TO1000 series package contents
Figure 3.1: Hantek TO1000 series package contents, including the oscilloscope, probes, and charger.
  • 1 x Hantek TO1112C Host
  • 1 x Carrying Package
  • 1 x Oscilloscope Probe (2Ch*1, 4Ch*2)
  • 1 x HT324 Test Leads (2Ch*1, 4Ch*2)
  • 1 x 18W Charger / Type-C Cable
  • 1 x Multimeter Probe (Only for TO1000C/D Series)

4. Initial Setup

4.1 Unpacking Inspection

After opening the package, please verify that all items listed in Section 3 are present and undamaged.

4.2 First Use

  1. Ensure the product is fully charged before initial use. The device supports Type-C fast charging.
  2. Check that the power supply voltage is consistent with the product specifications (AC100-240V, 50/60Hz, applicable worldwide).
Diagram showing fast charging with Type-C
Figure 4.1: The device supports fast charging via a standard 18W Type-C charger.

5. General Operating Instructions

5.1 Basic Operations

  • Power On/Off: Press and hold the power button for 3 seconds to turn the device on or off.
  • Function Selection: Short press the mode button to switch between different functions (Oscilloscope, DMM, AFG, H/R, Print).
  • Display Screen: The multi-touch large screen (800x480 resolution) displays current values, waveforms, and status information.
Front view of Hantek TO1112C showing touch screen interface
Figure 5.1: Front view of the Hantek TO1112C, highlighting the touch screen and function buttons.

5.2 Instrument-Specific Instructions

The Hantek TO1112C is a multi-functional instrument. Please observe the following when using its specific functions:

5.2.1 Oscilloscope Function

The TO1112C is a 2-channel oscilloscope with a maximum bandwidth of 110MHz and a sampling rate of 250MSa/s. It features 8M large storage depth and up to 42 measurement functions.

Diagram of four-channel digital storage oscilloscope capabilities
Figure 5.2: Overview of the digital storage oscilloscope capabilities.

5.2.2 Digital Multimeter Function

The device includes a high-precision multimeter for AC and DC voltage, current, resistance, capacitance, diode, and on-off measurements. It supports data recording, storage, trend charts, and statistical analysis.

Diagram explaining digital multimeter function
Figure 5.3: Digital multimeter function display and capabilities.

5.2.3 Arbitrary Function Signal Generator (AFG)

The TO1112C (and 'D' models) includes a signal generator with a variety of arbitrary waveforms. The highest output frequency is 25MHz. It supports AM/FM modulation and allows switching between high resistance and low resistance outputs.

Diagram detailing arbitrary function signal generator
Figure 5.4: Arbitrary function signal generator interface and features.

5.2.4 One-Key Waveform Storage

The device supports one-key waveform storage for convenient and fast data saving.

5.2.5 Suspension Foot Design

The unique suspension foot design allows for multi-angle adjustment, providing hands-free operation and protection against falls and seismic activity.

Image showing the suspension foot design
Figure 5.5: The suspension foot allows for versatile positioning and enhanced durability.

6. Technical Specifications

The following tables provide detailed technical specifications for the Hantek TO1112C and related models.

6.1 General Specifications

Table 6.1: General Specifications
Parameter CategoryGeneral ScopeRemark
Input powerAC100-240V, 50/60Hz or DC5V/9V/12VPlease refer to the product label.
Operating temperature-10℃ ~ 40℃
Storage temperature-20℃ ~ 60℃
Protection levelIP20 (for indoor use)Except for waterproof models
Authentication informationCE, ROHSCompliant with EU directives
Table of Arbitrary Wave, Multimeter, and General Specifications
Figure 6.1: Detailed specifications for Arbitrary Wave Generator, Multimeter, and General Device Parameters.

6.2 Oscilloscope Specifications

Table of Oscilloscope Horizontal, Vertical, and Acquisition Specifications
Figure 6.2: Oscilloscope specifications for horizontal, vertical, and acquisition parameters.
Table of Oscilloscope Trigger, Input, and Measurement Specifications
Figure 6.3: Oscilloscope specifications for trigger, input, and measurement functions.

6.3 Multimeter Specifications

Table of Multimeter Specifications for Voltage, Current, Resistance, Capacitance, Diode, On/Off Measurement
Figure 6.4: Detailed specifications for the integrated multimeter functions.

6.4 Model Comparison

Table comparing Hantek TO1000 series models
Figure 6.5: Comparison of different Hantek TO1000 series models, highlighting key differences in channels, bandwidth, sampling rate, storage depth, signal source, and multimeter functionality.

6.5 Mechanical & Environmental Specifications

Table 6.2: Mechanical & Environmental Specifications
ParameterSpecification
Fast ChargeSupport fast charging
Battery3.7V 2600mAh*4 in parallel (TO1112C) / 3.7V 2600mAh*2 in parallel (Other models)
Environmental Temperature0°C-50°C
Storage Temperature-20°C-60°C
Humidity≤+104°F (≤+40°C): ≤90% relative humidity
106°F ~ 122°F (+41°C ~ 50°C): ≤60% relative humidity
CoolingConvection
AltitudeOperating and Nonoperating: 3,000m (10,000 feet)
Random vibrationOperating: 0.31gRMS from 5Hz to 500Hz, 10 minutes on each axis
Nonoperating: 2.46gRMS from 5Hz to 500Hz, 10 minutes on each axis
Dimension (L x W x H)248mm*176mm*54mm
Weight (including batteries)1.2KG

7. Maintenance and Care

  • Cleaning: Wipe the outer casing with a soft, dry cloth. Do not use chemical solvents.
  • Storage: When not in use for an extended period, clean and store the device in a cool, dry place.
  • Battery: If the device will not be used for an extended period, please remove the battery to prevent leakage.

8. Troubleshooting Common Problems

Table 8.1: Troubleshooting Guide
ProblemPossible ReasonsSolution
Unable to power onPower not connected/battery depletedCheck the power connection, charge the battery, and try again.
No display/Display errorPoor connection/Incorrect settingsRestart the device and check all connections.
Inaccurate measurement values (instrument-related)Range error/calibration requiredConfirm the measurement range and contact calibration services.
Other faultsContact customer service for technical support.

9. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. Always refer to the detailed operating instructions for optimal performance.

10. Warranty and Support

10.1 Warranty Policy

The product comes with a 12/24 month warranty from the date of purchase (subject to store announcement).

10.2 Technical Support

For detailed technical documentation, calibration certificates, or hard copies of the manual, please contact us via AliExpress internal message or email: Miyeetool@outlook.com. Response time is typically within 24 hours on working days.

A detailed user manual in PDF format is available for download here: Hantek TO1000 Series User Manual (PDF).

11. EU Compliance Information

11.1 CE Declaration of Conformity

This product complies with the essential requirements of the following EU directives:

  • Low Voltage Directive (LVD) 2014/35/EU
  • Electromagnetic Compatibility Directive (EMC) 2014/30/EU
  • RoHS Directive 2011/65/EU

11.2 Waste Disposal (WEEE)

The wheeled bin symbol marked with an X on the product indicates that, according to EU Directive 2012/19/EU, this product must not be disposed of as unsorted municipal waste. It must be collected and recycled separately.

12. Disclaimer

This instruction manual is a general version; the actual product functions and parameters shall prevail. The manufacturer reserves the right to change product designs and specifications without prior notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.