MAXRUNON D9

Contents

MAXRUNON D9 Motorcycle Helmet Bluetooth Intercom User Manual

Model: D9 | Brand: MAXRUNON

1. Introduction

The MAXRUNON D9 is a motorcycle helmet Bluetooth intercom system designed for two riders, offering seamless communication and entertainment on the road. It features Bluetooth 5.3 for stable connectivity, Hi-Fi speakers for clear audio, and advanced noise cancellation for calls up to 100 km/h. The D9 supports multi-audio multitasking, allowing simultaneous intercom, music, GPS, and FM radio. Its robust design is IPX5 waterproof and includes a long-lasting 1000mAh battery.

MAXRUNON D9 Motorcycle Helmet Bluetooth Intercom main unit with features listed: Bluetooth 5.3, Hifi Speaker, Multi-Audio, FM Radio, 1000mAh Battery, 100km/h Communication Voice Crystal Clear, 2 Years Warranty.
Figure 1: MAXRUNON D9 Intercom System Overview

2. Package Contents

Please check the package carefully to ensure all items are present:

  • D9 Main Unit
  • Speaker Unit (40mm)
  • Button Mic
  • Hybrid Boom Mic
  • Adhesive Mount
  • Back Clip
  • Speaker Pads
  • Hook-and-Loop Fastener for Speaker (Velcro)
  • Type-C Cable
  • Thickness Adjustment Pads
  • Boom Mic Wind Cover
  • Product Instruction Manual
Diagram showing all components included in the MAXRUNON D9 package: D9 Main Unit, Button Mic, Hybrid Boom Mic, Speaker Unit, Adhesive Mount, Back Clip, Speaker Pads, Hook-and-Loop Fastener for Speaker, Type-C Cable.
Figure 2: Detailed Package List

3. Installation Guide

Follow these steps to properly install the D9 intercom system on your helmet:

  1. **Attach the Back Clip:** Push the back clip into place on the side of your helmet. Ensure it is securely fastened.
  2. **Mount the Main Unit:** Slide the D9 Main Unit onto the attached back clip until it clicks into place.
  3. **Speaker Placement:**
    • Use the hook-and-loop fasteners (Velcro) to attach the speaker pads inside the helmet's ear pockets.
    • Alternatively, use the thickness adjustment pads if needed for a snug fit, depending on the depth of your ear groove.
  4. **Speaker Installation:** Place the speakers inside the helmet, ensuring the short wire is on the left side and the long wire on the right side.
  5. **Microphone Installation:**
    • For open-face helmets, use the boom microphone. Attach it to the inside of the helmet near your mouth using the adhesive mount.
    • For full-face helmets, use the wired microphone. Attach it to the inside of the chin bar.
  6. **Connect Cables:** Ensure all audio cables (speakers and microphone) are securely connected to the D9 Main Unit. Align the two triangle markers and insert the cable fully into the audio exchange port.
Six-step diagram illustrating the installation of the D9 intercom system onto a motorcycle helmet, including attaching the clip, mounting the unit, placing speakers, and installing microphones.
Figure 3: Helmet Installation Steps
Diagram showing how to push and slide the D9 main unit onto the back clip, indicating the direction with arrows.
Figure 4: Attaching the Main Unit to the Clip

4. Controls and Ports

The MAXRUNON D9 features intuitive controls designed for easy operation even with gloves on.

Diagram of the D9 main unit highlighting its buttons and ports: Volume -, Volume +, Function Button, Intercom Button, Audio Exchange Port, Type-C Charging Port.
Figure 5: D9 Control Layout
  • **Volume - Button:** Decreases volume.
  • **Volume + Button:** Increases volume.
  • **Function Button:** Multi-purpose button for various operations.
  • **Intercom Button:** Initiates and manages intercom communication.
  • **Audio Exchange Port:** Connects speakers and microphone.
  • **Type-C Charging Port:** For charging the device.

5. Operating Instructions

5.1 Basic Operations

FunctionButton Operation
Power On/OffPress and hold Volume + and Function Button for 2 seconds
Play Music1 tap Function Button
Stop Music1 tap Function Button
Previous TrackPress and hold Volume + for 3 seconds
Next TrackPress and hold Volume - for 3 seconds
Volume Up1 tap Volume +
Volume Down1 tap Volume -
Answer CallAny button
End Call1 tap Intercom Button
Reject CallPress and hold Intercom Button for 3 seconds
Connect SmartphonePress and hold Intercom Button for 3 seconds

5.2 Intercom Operations

FunctionButton Operation
Group Bluetooth ConnectionPress and hold Intercom Button for 2 seconds. Once two units are found, tap Intercom Button once to confirm.
Team Mode1 tap Intercom Button
Universal ModePress and hold Intercom Button for 3 seconds. Other Bluetooth intercoms must enter Bluetooth pairing mode. Tap Intercom Button twice to enable intercom communication.
Disconnect Group BluetoothPress and hold Intercom Button for 2 seconds. Note: Disconnect the group when in Group Bluetooth connection state.
Diagram showing seamless audio multitasking with icons for Intercom, GPS, Music, and FM Radio, indicating they can be used simultaneously.
Figure 6: Audio Multitasking Capabilities
Diagram illustrating Intelligent Intercom Priority: when intercom is inactive, music is at full volume; when intercom is active, music dips and voice cuts through seamlessly.
Figure 7: Intelligent Intercom Priority

5.3 Additional Functions

FunctionButton Operation
Turn on Radio2 taps Function Button
Turn off Radio2 taps Function Button
Search Radio Station1 tap Function Button (when FM is on)
Factory ResetPress and hold Volume + and Volume - for 3 seconds. Note: After performing this function, the product will restart silently for 30 seconds.
Mic On/OffPress and hold Intercom Button and any Volume Button simultaneously for 2 seconds.
Activate Smartphone Voice Assistant2 taps Intercom Button
Image of a rider activating voice assistant (Siri) on the D9 intercom.
Figure 8: Voice Assistant Support
Image showing a rider listening to FM radio with a display of 91.5 MHz, highlighting the wide FM range of 87.5-108 MHz.
Figure 9: Wide FM Range (87.5-108 MHz)

6. Specifications

FeatureDetail
Model NameD9
Bluetooth Version5.3
Speaker Unit40mm
Microphone TypeBoom Mic (Omnidirectional), Wired Mic (Omnidirectional)
Maximum Number of Speakers (Intercom Users)2
Maximum Intercom Distance500-1000m (in open areas)
Noise ReductionAdvanced CVC/DSP (Clear calls up to 100 km/h)
Waterproof RatingIPX5
Battery Capacity1000mAh (Built-in)
Power Supply ModeBuilt-in Battery
Software Update SupportNo
FM FunctionYes (Range: 87.5-108 MHz)
Fast Charging TimeApprox. 120 minutes (2 hours)
Standby TimeApprox. 350 hours
Intercom Talk TimeApprox. 12 hours
Music Playback TimeApprox. 12 hours
Intercom + Music Simultaneous Use TimeApprox. 24 hours
Auto Voice PriorityYes (Music volume lowers during calls)
Special FeaturesWaterproof, Voice Control, Universal Pairing Function, Noise Reduction, FM
Connection ModeBluetooth
CertificationCE, RoHS, WEEE, FCC
OriginMainland China
Plug TypeEU Plug (for charger)
Item TypeHelmet Headset
Image showing the D9 unit charging via Type-C, with battery life indicators: 12h Music, 12h Intercom, 350h Standby, and 2h Charge time for its 1000mAh battery.
Figure 10: Battery Life and Charging
Infographic summarizing key features: Universal Pairing, Hi-Fi Audio, 2-Rider Intercom (Max 1000m), CVC/DSP Noise Cancel, Bluetooth 5.3, Audio Multitasking, IPX5 Waterproof, FM Radio.
Figure 11: Key Features Summary

7. Troubleshooting

  • **Device does not power on:**
    • Ensure the battery is charged. Connect the device to a power source using the Type-C cable.
    • Verify the power on sequence (press and hold Volume + and Function Button for 2 seconds).
  • **No sound from speakers:**
    • Check if the speaker cables are securely connected to the audio exchange port.
    • Increase the volume using the Volume + button.
    • Ensure the device is powered on and connected to your audio source (smartphone, intercom partner).
  • **Cannot pair with another device/intercom:**
    • Ensure both devices are in pairing mode.
    • Clear previous pairings on both devices if necessary (perform a factory reset if persistent issues occur).
    • For universal pairing, ensure the other intercom is also in its Bluetooth pairing mode.
  • **Intercom communication is unclear or cuts out:**
    • Reduce the distance between the two intercom units.
    • Ensure there are no major obstacles (buildings, dense terrain) between the units.
    • Check microphone placement and ensure the wind cover is properly installed on the boom mic.
    • Verify that the noise reduction feature is active.
  • **Voice Assistant does not activate:**
    • Ensure your smartphone's voice assistant is enabled and configured.
    • Double-tap the Intercom Button to activate.

8. User Tips

  • **Universal Compatibility:** The D9 supports universal pairing, meaning it can connect with intercoms from other major brands. If you're having trouble connecting, ensure the other intercom is also in its Bluetooth pairing mode.
  • **Optimal Microphone Choice:** Use the boom microphone for open-face helmets and the wired microphone for full-face helmets to ensure the best voice pickup and noise cancellation.
  • **Glove-Friendly Control:** The large buttons are designed for easy use with gloves. Practice common operations (volume, music control, intercom) before riding to ensure smooth, distraction-free control.

9. Safety and Compliance Information

9.1 RF Exposure Statement

This device complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

9.2 FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

**Note:** This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

**Note 2:** Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

9.3 IC Warning

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

10. Warranty and Support

The MAXRUNON D9 Motorcycle Helmet Bluetooth Intercom comes with a 2-year warranty from the date of purchase, covering manufacturing defects. For technical support, troubleshooting assistance, or warranty claims, please contact our customer support team.

**Customer Support Email:** japan@maxrunon.com

Please provide your product model (D9) and a detailed description of the issue when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.