MLLSE G10

Contents

MLLSE G10 Mini PC User Manual

Model: G10

1. Introduction

Disclaimer

  • Always use the original power supply. The company is not responsible for problems or failures caused by third-party adapters.
  • Users may use third-party music videos, pictures, and software, but we are not responsible for copyright issues or software failures.
  • In case of product failure, we will strictly adhere to warranty terms but are not liable for property damage or economic loss during use.
  • The device comes with built-in software from the factory and is tested. Deleting or not deleting software for compatibility or other issues will not affect the machine and is not a product quality problem.
  • The company reserves the right to improve the product. Specifications and design are subject to change without prior notice. Refer to the actual product.

Important Notes

  • Exercise caution during operations that may cause file damage or loss.
  • Pay attention to virus protection; use a virus firewall.
  • Turn off and disconnect the power supply when the Mini PC is not in use for an extended period.
  • Avoid frequently turning the Mini PC on and off in a short time. Recommended interval between starts is at least 10 seconds, preferably not less than 60 seconds.
  • Ensure a moisture-proof, clean, and sterile environment. Wipe dust with a dry soft cloth.
  • Avoid direct strong light and strong magnetic fields.
  • Do not spill liquids (water, food) on the Mini PC or pull data/power cables.

2. Package Contents

Please check the box for the following items:

ItemQuantity
MLLSE Mini PC1
HDMI Cable1
Bracket1
Power Adapter1
User Manual1
ScrewsSet

3. Setup

Quick Installation

Follow these steps to quickly set up your Mini PC:

  1. Connect the display device (monitor) via HDMI, DP, or Type-C cable.
  2. Connect the included DC power adapter to the Mini PC and a power outlet.
  3. Connect your keyboard and mouse (self-provided) via the USB interface.
  4. Connect to the internet via a network cable or set up WiFi after turning on.
Quick Installation Diagram
Diagram: Quick Installation steps for the MLLSE G10 Mini PC, showing connections for display, power, peripherals, and internet.

VESA Bracket Installation

Some models may come with a standing bracket instead of a VESA mount bracket. Refer to the actual product for specific instructions.

VESA Bracket Installation Diagram
Diagram: VESA Bracket Installation, illustrating how to mount the Mini PC to the back of a monitor.

4. Operating Instructions

Power On and Initial Setup

When starting your Mini PC for the first time, the system will guide you through the Windows operating system configuration:

  1. Press the power button to start. Wait several minutes for the installation interface to appear.
  2. Select Language/Country (Region).
  3. Select "Input Method" and click "Confirm".
  4. Select the second input method (you can skip this).
  5. Network: Enter the password to connect after selecting WiFi, or plug in a network cable. The network will automatically update, which can extend startup time. It is strongly recommended to skip the network connection during initial setup.
  6. Accept the License Agreement.
  7. Set Username and Password. The desktop will appear after installation.

Connect to WiFi

  1. Select the WiFi icon (WiFi icon) from the taskbar to turn on WiFi.
  2. Select an access point from the list of available WiFi connections.
  3. Enter the security key if prompted to activate the WiFi connection.

Enter BIOS Setup

BIOS (Basic Input/Output System) is the first software loaded when the Mini PC starts.

  • To enter BIOS, press the "Del" or "F2" key during startup.
  • Default BIOS settings are usually optimal. Do not change them unless new system components require further setup or a BIOS update.
  • Note: Inappropriate BIOS settings can cause instability or boot failure. It is strongly recommended to change BIOS settings only with technical service personnel assistance.

5. Maintenance

Cleaning and Maintenance

  1. Turn off the product and unplug the power adapter before cleaning.
  2. Wipe the product housing with a damp towel, avoiding interfaces and electrical components, then dry with a soft cloth. Do not use corrosive cleaning fluids.
  3. Do not immerse the product in water or other liquids.
  4. After cleaning, place it in a dry and ventilated environment to dry thoroughly before use or storage.

6. Troubleshooting

Q1: Why can't the machine be turned on?
A1: First, confirm the machine is connected to the power supply and using the original charger. If the power light is off and no response, disassemble the machine (refer to disassembly video if available), unplug and plug the power cable on the motherboard, then try again. If issues persist, contact the FIREBAT team.
Q2: Why is the fan working and the light on, but it can't boot?
A2: This is likely a system problem preventing normal boot. Try unplugging and plugging the hard disk. For non-onboard machines, unplug and plug the memory stick. If it still doesn't boot, download the image system from the FIREBAT official website and reinstall it.
Q3: How to solve a blue screen crash?
A3: Generally caused by driver incompatibility. Fixing vulnerability patches or updating drivers can cause blue screen issues. Check the blue screen code to identify the incompatible driver. After entering the desktop, uninstall the problematic driver and download the factory driver from the FIREBAT official website, or reinstall the system.
Q4: Why is the network slow or WiFi connection keeps disconnecting?
A4: a. Confirm if it's a router issue or low network bandwidth. Improve network environment or increase bandwidth. Weak signals can be caused by distance or walls; move the device closer to the signal source. b. Uninstall and reinstall the network card driver. c. If network and driver are fine, it might be poor WiFi contact. Disassemble and unplug the wires on the WiFi network card.
Q5: How to change the operating system?
A5: Insert a USB disk, press "Del" or "F2" to enter BIOS. Select "startup", then "boot", and press "Enter" to access the system priority boot menu. Set the USB disk as priority boot, then save and exit. (Note: We only provide maintenance for pre-installed systems.)
Q6: Why can't the USB port be used?
A6: If USB ports are not working after booting, shut down the computer. After shutting down, press and hold the power button for 30 seconds, repeat 3 times to discharge static electricity, then wait five minutes before turning on. If still not working, contact the FIREBAT team.
Q7: Why is it stuck in "Windows Preparing Automatic Repair"?
A7: This is usually due to internal system problems. For automatic repair: a. Wait patiently for the machine to repair itself. b. If repair fails, download the image system from the official website and reinstall. c. Unplug the hard disk. If still unresolved, reinstall the system. For blue screen errors during automatic repair: Disassemble the machine and unplug the hard disk. If the blue screen persists, download the image system from the FIREBAT official website and reinstall.
Q8: How to solve video playback lag?
A8: a. Check for limited network speed or issues with the video website's transmission bit rate. b. If the computer is not under high load but keeps freezing, reinstall the system. If it persists, contact the FIREBAT team.
Q9: What causes the computer to overheat?
A9: Overheating can occur during high-load operation. It's normal for prolonged high-load use. Clean the cooling system (fan silicone grease) and improve cooling by blowing with a fan. Optimize processes and close unnecessary software to free up RAM.
Q10: How to fix the display not waking up after sleep?
A10: a. Open Device Manager, right-click the mouse, select "Properties". b. Select "Power Management" and check "Allow this device to wake the computer". c. Return to the previous level, right-click "Keyboard Property Management". d. Switch to power management and check "Allow this device to wake the computer".
Q11: Why doesn't the computer reach the described pulse frequency?
A11: When idle, the CPU runs at its lowest frequency to save power. During operation, CPU speed gradually increases. Right-click the taskbar, open "Task Manager", go to "Performance" to observe CPU status.
Q12: What to do if the mini-computer cannot shut down?
A12: Press and hold the power button for at least 4-6 seconds until the Mini PC shuts down.

7. Specifications

FeatureDetail
ModelG10
CPUAMD Ryzen 7 H255 (Zen 4, 8 Cores, 16 Threads, up to 4.9 GHz, 16 MB L3 Cache, 4nm)
GPUAMD Radeon™ 780M (12 computing cores, supports ray tracing)
Memory (RAM)LPDDR5 24GB (up to 6400 MT/s)
Hard Drive (SSD)1TB M.2 NVMe 2280 SSD (Dual SSD slots, expandable up to 4TB)
I/O (Front)Type-C*1, USB3.0*2, Audio*1, Power*1
I/O (Back)HDMI*1, DP*1, RJ45*1, USB3.0*4, DC*1, Keyhole
WirelessWiFi 6 + BT 5.2
NetworkRJ45*1 (2.5G)
Dimensions128.00 * 128.00 * 37mm (Excluding Feet)
SystemWindows 11
DesignMinimalist Moonlight Silver Metallic Paint Finish
Main Parameters Table
Image: Main Parameters table for the MLLSE G10 Mini PC, detailing Model, CPU, GPU, Memory, Hard Drive, I/O, Wireless, Network, Dimensions, and System.
AMD Ryzen 7 H255 Processor Details
Image: Detailed specifications of the AMD Ryzen 7 H255 processor and AMD Radeon™ 780M graphics.
LPDDR5 Memory and Storage Details
Image: Information on LPDDR5 high-speed memory and dual-slot high-capacity storage with PCIe 3.0 NVMe SSD.
Heat Dissipation System
Image: Illustration of the Mini PC's excellent heat dissipation system, including all-copper heat pipe and centrifugal fan.
Triple Screen Display Setup
Image: The Mini PC supporting triple screen display via HDMI, DP, and Type-C outputs.
Full-type Interface Diagram
Image: Diagram showing the full range of front and back interfaces on the MLLSE G10 Mini PC.

8. User Tips

  • Verify RAM Performance: Upon receipt, verify the actual RAM performance. Some users have reported speeds lower than advertised LPDDR5 specifications (e.g., around 1500 MT/s instead of 6400 MT/s). Contact technical support if discrepancies are found.
  • Initial Network Setup: During the initial Windows setup, it is highly recommended to skip the network connection step to expedite the process. You can connect to WiFi or Ethernet after the initial setup is complete.
  • BIOS Settings: Only modify BIOS settings if you have installed new system components or are performing a BIOS update. Incorrect settings can lead to instability or boot failures. Consult technical support if unsure.

9. Warranty & Support

Warranty Information

We provide a one-year product quality warranty from the date of purchase and free lifetime technical support. For normal faults or quality problems within the warranty period, we offer free replacement or repair services. For damage caused by manual operation, the cost of product parts for repair will be charged. Our technical support team is available 24 hours a day.

Contact and Additional Resources

If you encounter any problems during use, please feel free to contact us.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.