Joyroom JR-CB2S

Contents

Joyroom JR-CB2S Bluetooth 5.4 2-in-1 Receiver Transmitter

User Manual

1. Product Overview

The Joyroom JR-CB2S is a versatile 2-in-1 Bluetooth 5.4 adapter that functions as both a receiver and a transmitter. It allows you to wirelessly stream audio from non-Bluetooth devices to Bluetooth headphones/speakers (TX mode) or from Bluetooth-enabled devices to non-Bluetooth audio systems (RX mode). Featuring a smart OLED display, long battery life, and dual device connection, it's designed for a seamless audio experience in various settings, including cars, home entertainment systems, and during travel.

Joyroom JR-CB2S 2-in-1 Bluetooth Adapter
Joyroom JR-CB2S 2-in-1 Bluetooth 5.4 Receiver Transmitter
Smart OLED Status Display
Smart OLED Display showing TX/RX mode, connected devices, battery level, and volume.
Bluetooth 5.4 Technology
Upgraded Bluetooth 5.4 Technology for faster connection and transmission.

Package Contents

Please check the box for the following items:

  • Bluetooth transmitter receiver (JR-CB2S) ×1
  • 3.5mm AUX Cable ×1
  • USB-C Charging Cable ×1
  • RCA Cable ×1
  • User Manual & Warranty Card ×1
Package Contents
Included cables: 3.5mm AUX, RCA, and USB-C Charging Cable.

2. Product Diagram and Controls

Familiarize yourself with the device's layout and buttons:

Function Buttons Explained
Diagram of the JR-CB2S with labeled buttons and ports.
  • Sound Reduction Button (Left): Decreases volume.
  • Confirm (OK) Button (Middle): Confirms selections, plays/pauses music.
  • Sound Increase Button (Right): Increases volume.
  • LED Lamp: Status indicator.
  • Display Screen: OLED display for status information.
  • Mode Switching Switch (Side): Toggles between TX (Transmitter) and RX (Receiver) modes.
  • Turn On/Off Button (Side): Powers the device on or off.
  • 3.5mm Audio Interface (Side): For AUX cable connection.
  • Type-C Charging Port (Side): For charging the device.

3. Setup and Connection

3.1 Powering On/Off

  • Power On: Long press the 'Turn On/Off' button for 2-3 seconds.
  • Power Off: Long press the 'Turn On/Off' button for 2-3 seconds.
  • Forced Power Off (Troubleshooting): If the device is in an abnormal state, long press the 'Turn On/Off' button for 8-9 seconds.

3.2 TX (Transmitter) Mode Setup

In TX mode, the JR-CB2S transmits audio from a non-Bluetooth source (e.g., TV, PC) to Bluetooth headphones or speakers.

  1. Switch to TX Mode: Toggle the 'Mode Switching' switch to 'TX'.
  2. Enter Pairing Mode: If the device is off, long press the 'Turn On/Off' button for 2-3 seconds. If it doesn't pair automatically, double-press the 'Turn On/Off' button to enter pairing mode (red and blue lights will flash alternately).
  3. Connect to Audio Source: Use the included 3.5mm AUX cable or RCA cable to connect the JR-CB2S to your audio source (e.g., TV's audio output, PC's headphone jack).
    TX Mode Connect TV
    Connecting the JR-CB2S to a TV in TX mode.
  4. Pair with Bluetooth Device (Headphones/Speakers): Turn on your Bluetooth headphones or speakers and put them into pairing mode. The JR-CB2S will search for available devices.
  5. Select Device: On the JR-CB2S display, use the 'Sound Increase' (▲) and 'Sound Reduction' (▼) buttons to navigate the device list. Press the 'Confirm (OK)' button to select and connect.
  6. Connection Confirmation: Once connected, the JR-CB2S blue light will be steady on, and the screen will show the name of the connected device.
TX Mode Pairing Diagram
TX mode pairing and connection process.

3.2.1 TX Mode: Pairing Two Devices

The JR-CB2S supports connecting to two Bluetooth headphones/speakers simultaneously in TX mode.

  1. Connect First Device: Follow steps 1-6 above to connect the first Bluetooth device (Device A).
  2. Enter Pairing Mode for Second Device: Double-click the 'Turn On/Off' button on the JR-CB2S. The red and blue lights will flash alternately. (Device A will remain connected and unaffected).
  3. Pair with Second Device: Turn on the second Bluetooth device (Device B) and put it into pairing mode.
  4. Select Second Device: On the JR-CB2S display, use the 'Sound Increase' (▲) and 'Sound Reduction' (▼) buttons to select Device B. Press the 'Confirm (OK)' button to connect.
  5. Dual Connection Confirmation: Once both devices are connected, the blue light on the JR-CB2S will be steady on, and the Bluetooth names of both Device A and Device B will be displayed on the screen.
TX Mode Dual Device Connection
Enjoying audio with two headphones in TX mode.
TX Mode Airplane Use
Using the JR-CB2S as an airplane audio transmitter.

3.3 RX (Receiver) Mode Setup

In RX mode, the JR-CB2S receives audio from a Bluetooth source (e.g., smartphone, tablet) and outputs it to a non-Bluetooth audio system (e.g., car stereo, wired speakers).

  1. Switch to RX Mode: Toggle the 'Mode Switching' switch to 'RX'.
  2. Enter Pairing Mode: If the device is off, long press the 'Turn On/Off' button for 2-3 seconds. If it doesn't pair automatically, double-press the 'Turn On/Off' button to enter pairing mode (red and blue lights will flash alternately).
  3. Connect to Audio Output: Use the included 3.5mm AUX cable or RCA cable to connect the JR-CB2S to your audio system's input (e.g., car AUX port, speaker AUX input).
    RX Mode Car Connection
    Connecting the JR-CB2S to a car's AUX port in RX mode.
  4. Pair with Bluetooth Device (Smartphone/Tablet): On your smartphone or tablet, enable Bluetooth and search for 'JR-CB2S'. Select it to connect.
  5. Connection Confirmation: Once connected, the JR-CB2S blue light will be steady on, and the screen will show the name of the connected device.
RX Mode Pairing Diagram
RX mode pairing and connection process.

3.3.1 RX Mode: Pairing Two Devices

The JR-CB2S supports connecting to two Bluetooth source devices (e.g., two smartphones) simultaneously in RX mode.

  1. Connect First Device: Follow steps 1-5 above to connect the first Bluetooth device (e.g., Mobile Phone 1).
  2. Enter Pairing Mode for Second Device: Double-click the 'Turn On/Off' button on the JR-CB2S. The red and blue lights will flash alternately. (Mobile Phone 1 will remain connected and unaffected).
  3. Pair with Second Device: On the second Bluetooth device (e.g., Mobile Phone 2), enable Bluetooth and search for 'JR-CB2S'. Select it to connect.
  4. Dual Connection Confirmation: After successful connection, the JR-CB2S blue light will be on. You can switch between the two connected devices for audio playback.
RX Mode Speaker Connection
Connecting a phone to speakers via JR-CB2S in RX mode.
TX and RX Mode Applications
Overview of TX and RX mode applications.

4. Operating Instructions

4.1 Basic Functions

FunctionAction
Power OnLong press 'Turn On/Off' button for 2-3s
Power OffLong press 'Turn On/Off' button for 2-3s
Enter Pairing ModeDouble press 'Turn On/Off' button
Forced Power OffLong press 'Turn On/Off' button for 8-9s
Select Device (TX Mode)When in pairing (TX) mode, press 'Confirm (OK)' button to choose device
Play/Pause Music (RX Mode)When in RX mode, press 'Confirm (OK)' button
Clear Pairing RecordWhen powered on, long press 'Confirm (OK)' button for 3s
Switch Mode (TX/RX)Toggle the 'Mode Switching' switch
Volume UpPress 'Sound Increase' (▲) button
Next Song (RX Mode)Long press 'Sound Increase' (▲) button for 1s
Volume DownPress 'Sound Reduction' (▼) button
Last Song (RX Mode)Long press 'Sound Reduction' (▼) button for 1s

4.2 Status Indicators (LED Light)

StateIndicator
Power On (RX/TX)Blue light flashes 3 times
Power Off (RX/TX)Red light flashes 3 times
Pairing (RX/TX)Red and blue lights flash alternately
Standby (RX/TX)Blue light flashes twice every 5 seconds
Connected (RX/TX)Blue light on (steady)
Pair 2 devices (RX/TX)Blue light on (steady)
Link Back (RX/TX)The blue light flashes once every 1 second
Clear Pairing Record (RX/TX)The red and blue lights flash four times simultaneously
Low BatteryRed and blue lights flashing red breath flashing 4 times simultaneously
ChargingRed light on (steady)
Full ChargeRed light off

5. Specifications

FeatureSpecification
Model NameJR-CB2S
Brand NameJoyroom
Bluetooth VersionV5.4
Frequency Range2.402-2.480GHz
Bluetooth ProtocolA2DP, AVRCP
Audio DecodingSBC (AAC supported)
RX Working TimeAbout 18 hours (at 60% volume)
TX Working TimeAbout 30 hours (at 60% volume)
Battery Capacity400mAh Rechargeable lithium battery
Charging TimeAbout 2 hours
Charging PortType-C
Power Input5V DC ≥500mA
Working Temperature-10—55°C
Weight27g
Size47.5mm × 47.5mm × 16.3mm
BT Range15m (barrier-free open environment)
MaterialABS+PC
CertificationCE, FCC, RoHS
Product Parameters
Detailed product parameters and dimensions.
Bluetooth 5.4 Comparison
Comparison of Bluetooth 5.4 technology features.

6. Charging the Device

The JR-CB2S has a built-in 400mAh rechargeable lithium battery. To charge the device:

  1. Connect the included USB-C charging cable to the Type-C charging port on the JR-CB2S.
  2. Connect the other end of the USB-C cable to a power source (e.g., computer USB port, car charger, or a wall adapter) that provides 5V DC and at least 500mA.
  3. The red LED indicator will be steady on during charging.
  4. Once fully charged (approximately 2 hours), the red LED indicator will turn off.

7. Maintenance

  • Keep the device dry and away from liquids. Do not immerse it in water.
  • Avoid exposing the device to extreme temperatures (below 0°C or above 45°C).
  • Do not disassemble or attempt to repair the product yourself. This may void the warranty and cause damage.
  • Use only the provided charging cable and a compatible power adapter (5V DC, ≥500mA) to prevent battery damage.
  • Do not block any openings on the product, such as the charging port or indicator lights.
  • Clean the device with a soft, dry cloth.

8. Troubleshooting (FAQ)

A. Auto-Power Off

The device will automatically shut down if:

  • No device is connected for more than 10 minutes in RX/TX state.
  • The battery voltage drops below 3.1V.

B. How to Reconnect? What if I can't connect it back?

After the JR-CB2S is successfully connected to a Bluetooth device, it will automatically reconnect to that device every time you power it on. If the connection fails, please retry the connection process as described in the Setup section.

C. How to Clear Pairing Records?

To clear all pairing records (both TX and RX modes):

  1. Ensure the device is powered on.
  2. Long press the 'Confirm (OK)' button for 3 seconds. The display will show "Factory Reset ?".
  3. Press the 'Sound Reduction' (▼) button to confirm and clear. The screen will display "Resetting....", and the red and blue lights will flash four times simultaneously.
  4. To cancel, press the 'Sound Increase' (▲) button.

D. What should I do if there are some exceptions (e.g., power-on failure, abnormal connection)?

You can try to force power off the device by long pressing the 'Turn On/Off' button for 8-10 seconds. After it powers off, restart the device and try again.

E. Can I connect two JR-CB2S units together for wireless audio transmission?

Yes, the JR-CB2S is a 2-in-1 device, meaning one unit can act as a transmitter (TX) and another unit can act as a receiver (RX). You can set one JR-CB2S to TX mode and connect it to your audio source (e.g., TV), and set a second JR-CB2S to RX mode and connect it to your audio output (e.g., wired speakers), then pair the two units wirelessly for audio transmission.

9. User Tips

  • Low Latency Audio: Users report very low latency, making it suitable for watching videos and gaming without noticeable audio delay.
  • Dual Headphone Support: The dual device connection feature in TX mode works effectively, allowing two users to listen to the same audio source simultaneously with separate Bluetooth headphones.
  • Versatile Use: The device performs well in both transmitter and receiver modes, making it ideal for various applications such as in cars, with home hi-fi systems, TVs, and computers.
  • Good Sound Quality: Many users praise the clear sound quality and good bass response.
  • Strong Signal Range: The device can maintain a clear signal even through walls, indicating good transmission range.
  • Powers Large Headphones: It has sufficient power to drive larger headphones effectively.
  • OLED Display: The OLED screen is a highly appreciated feature for its clear display of device status, battery level, and connected devices.

10. Safety Criteria

Please read and follow these safety instructions carefully:

  1. Do not disassemble or refit the product for any reason, as this may cause it to break down or burn.
  2. Do not immerse the product in any liquid or wash it with water.
  3. Use only adapters that conform to national/regional safety standards along with the included charging cable. Improper charging may damage the battery or cause safety problems.
  4. Use and store the product in normal temperatures. Avoid temperatures below 0°C or above 45°C.
  5. Do not block the openings of the product, such as the charging port or indicator.
  6. Avoid using the product at high volume levels for extended periods to prevent dizziness or hearing damage.
  7. Do not use the product during thunderstorms, as this may lead to abnormal performance and signal interruption.

Battery Warning

  • Disposing of the battery by throwing it into fire or a hot oven, or by mechanically crushing or cutting it, may result in an explosion.
  • When the battery is exposed to extremely low air pressure, it may cause an explosion or lead to flammable liquid or gas leakage.
  • Always follow the above safety instructions to prevent fire, electric shock, damage, or other injuries.

EU/EC Declaration of Conformity

This product model of JOYROOM complies with the provisions of Directive 2014/53/EU and Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the official Joyroom website: https://www.joyroom.com

Recycling Information

This equipment complies with the provisions of Directive 2012/19/EU and 2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash. It must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.

11. FCC Note

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

12. Warranty and Support

For FAQs and more information, please visit the official Joyroom website: https://www.joyroom.com

If you require support, you can contact Joyroom via email:

Email: support@joyroom.com

Your product may come with a specific warranty code. Please refer to your packaging or the official website for details. An example warranty code is 874695.

Warranty and Support QR Code
Scan for FAQs and more information. Example Warranty Code: 874695.

13. Product Video

Watch the official product video for a visual guide on setup and usage:

Official product demonstration and usage video.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.