TELESIN S1-TSS-07

Contents

TELESIN 3-in-1 Underwater Selfie Stick Tripod Remote Control User Manual

Model: S1-TSS-07

1. Introduction

This manual provides instructions for the TELESIN 3-in-1 Underwater Selfie Stick Tripod Remote Control. This versatile accessory functions as a floating handle, an extendable selfie stick, and a tripod, designed for use with GoPro Hero 9, 10, 11, 12, 13, and GoPro Max action cameras. Please read this manual carefully before use to ensure proper operation and maintenance.

2. Package Contents

Please check that all the following items are included in your package:

  • 1x Floating Stick
  • 1x Locking Screw
  • 1x Anti-loss Wrist Strap
  • 1x Charging Cable
  • 1x User Manual
Package Contents: Floating Stick, Locking Screw, Anti-loss Wrist Strap, Charging Cable, User Manual
Image: Package Contents. Includes the floating stick, locking screw, anti-loss wrist strap, charging cable, and user manual.

3. Specifications

FeatureSpecification
ModelS1-TSS-07
MaterialPlastic / Aluminum Alloy
Dimensions52.5 × 45.3 × 27.4 mm
Weight215 g
Telescoping Length27.4 cm ~ 47.2 cm
Waterproof RatingIP68 (underwater ≤ 15 meters)
Battery80mAh Lithium Battery
Charging MethodPogo Pin, 5V/1A
Charging Time2.5 hours
Compatible ModelsGoPro Hero 9 to 13, GoPro Max
Product Specifications table with dimensions, weight, telescoping length, waterproof rating, battery, charging, and compatible models.
Image: Detailed product specifications including physical dimensions and technical data.

4. Setup

4.1 Camera Installation

  1. Mount your action camera onto the handler using the provided locking screw.
  2. If diving deeper than 10 meters, ensure your action camera is equipped with its own waterproof housing (not included in this package).
Video: Demonstrates how to install the action camera onto the selfie stick handler. (Relevant segment: 0:05-0:11)

4.2 Camera Connection (Bluetooth Pairing)

  1. Press and hold the power button on the selfie stick for 3 seconds to turn it on. The device will automatically search for signals. Before the Bluetooth connection is established, all three indicator lights (Timelapse, Video, Photo) will light up and flash simultaneously.
  2. Open the action camera's remote connection interface and select "Connect with the remote". The connection interface may vary by camera model; please refer to the user manual of your specific camera model for detailed instructions.
Video: Shows the process of connecting the selfie stick to the action camera via Bluetooth. (Relevant segment: 0:12-0:25)

4.3 Wrist Strap Installation

  1. The base of the product features three openings.
  2. Select any opening and thread the wrist strap through it.
  3. Secure the wrist strap firmly and wear it.
  4. Adjust the slider on the wrist strap to fit your wrist comfortably.
Video: Demonstrates how to install and wear the wrist strap for added security. (Relevant segment: 0:48-1:00)

5. Operating Instructions

5.1 3-in-1 Functionality

The TELESIN S1-TSS-07 offers three modes of use:

  • Floating Handle: Invert the product and gently place it in the water. The buoyant design will allow it to float upright, keeping your camera visible and accessible.
  • Selfie Stick: Adjust the telescoping tube to your preferred length. The adjustable range is approximately 0-198mm. This mode provides stable performance both on land and underwater.
  • Tripod: Extend each leg of the tripod and place it on a stable surface. Pull out the telescoping tube to adjust to the desired shooting height for stationary shots. The tripod legs feature a magnetic closure for secure storage.
Image showing the 3-in-1 functionality: Floating Handle, Selfie Stick, and Tripod.
Image: Overview of the 3-in-1 functionality: Floating Handle, Selfie Stick, and Tripod.
Image showing a diver using the selfie stick underwater, highlighting its waterproof capability up to 15 meters.
Image: Product is waterproof up to 15 meters. For deeper dives, use a waterproof housing for your camera.
Image illustrating underwater Bluetooth connectivity with signal enhancement, steady connection, and 0.3-second response time.
Image: Underwater Bluetooth provides stable and responsive control with signal enhancement.
Video: Demonstrates the usage of the tripod on land and the floating capability underwater. (Relevant segment: 0:27-0:46)

5.2 Button Functions

The remote control features three buttons and three indicator lights for intuitive operation:

  • Power Button: Turns the remote on/off.
  • Mode Button (M): Switches between camera modes (Time-lapse, Video, Photo).
  • Shutter Button: Initiates/stops recording or takes photos.
Diagram of the remote control buttons: signal light, charging port, power button, mode button (M), and shutter button.
Image: Layout of the remote control buttons and indicator lights.
5.2.1 Switch Shooting Modes

Press the Mode button (M) to cycle through the available shooting modes: camera time-lapse, video, or photo mode. The corresponding status light will illuminate to indicate the currently selected mode.

5.2.2 Start Shooting
  • For Video: Press the Shutter Button once to start recording video. Press it again to stop recording.
  • For Photo: Press the Shutter Button once to take a photo.
5.2.3 Remote Power Control

Press and hold the Shutter button for 3 seconds to remotely power the connected camera on or off.

5.2.4 Quick Record
  • When the camera is off and supports Quick Record: Short press the Shutter button on the remote for 1 second to wake the camera and automatically start recording.
  • If the remote is off: Press and hold the Power button for 3 seconds to turn it on (a red light indicates the current mode); then short press the Shutter button for 1 second. The camera will connect and start recording automatically.
Video: Demonstrates switching shooting modes, starting/stopping recording, remote power control, and quick record functions. (Relevant segment: 1:02-1:53)

6. Maintenance

  • After use in saltwater, rinse the product thoroughly with fresh water to prevent corrosion.
  • Ensure the product is completely dry before storing it.
  • Avoid exposing the product to extreme temperatures or direct sunlight for prolonged periods.
  • Do not attempt to disassemble or repair the product yourself. Contact customer support if issues arise.

7. Troubleshooting

  • Remote not connecting to camera:
    • Ensure Bluetooth is enabled on both the remote and the action camera.
    • Check that the remote control is charged.
    • Verify that the remote and camera are within effective range.
    • Try re-pairing the devices by following the camera connection steps in Section 4.2.
  • Camera not responding to remote commands:
    • Check the battery levels of both the remote and the camera.
    • Ensure the correct shooting mode (video, photo, time-lapse) is selected on the remote.
    • Confirm that the camera is not in a menu or settings screen that prevents remote control.
  • Product does not float or has insufficient buoyancy:
    • Verify that the total assembled weight of your action camera and any accessories (including waterproof housing if used) does not exceed 223g.

8. User Tips

  • For optimal underwater performance, especially when diving deeper than 10 meters, always use a dedicated waterproof housing for your action camera.
  • Ensure the total assembled weight of your camera and accessories does not exceed 223g to maintain proper buoyancy.
  • The remote control's connection interface may vary by camera model. Always refer to your specific camera's user manual for detailed pairing instructions.
  • The product is compatible with GoPro Hero 9 to 13 and GoPro Max. For DJI Osmo Action 5 Pro, compatibility is not guaranteed by the manufacturer.

9. Warranty and Support

For warranty information, technical support, and further assistance, please refer to the official TELESIN website or contact your authorized retailer. A detailed user manual in PDF format is available for download at TELESIN User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.