RETEKESS TH017

Contents

RETEKESS Smart Pillbox TH017 User Manual

Model: TH017 | Brand: RETEKESS

1. Product Introduction

The RETEKESS Smart Pillbox TH017 is an advanced medication dispenser designed to help users manage their medication schedules effectively. It features 21 individual compartments, automatic pill dispensing, customizable alerts, and dual power options, available in both Wi-Fi and Standalone versions.

1.1 Device Overview

Refer to the diagram below for an overview of the pillbox components.

Top-down view of the RETEKESS Smart Pillbox TH017, showing the LCD screen and 21 compartments.
Figure 1: RETEKESS Smart Pillbox TH017 - Top View
Detailed diagram of the pillbox components with numbered labels.
Figure 2: Pillbox Component Diagram
Component Identification
Icon/NumberNameDescription
1Top CoverProtective lid for the pill compartments.
2Daily Measurement RingRing for setting daily dosage.
● (Record)Record ButtonUsed for recording custom voice alerts.
4Display ScreenLCD screen for time, alarms, and settings.
5Button AreaContains control buttons.
6Top Cover LockSecures the top cover.
7Pill Dispenser OutletWhere pills are dispensed.
8MicrophoneFor recording voice messages.
9Indicator LightIndicates pill dispensing or timeout.
10Type-C Power PortMain power input.
11Speaker HoleAudio output for alerts.
12Battery CoverCover for battery compartment.
13Battery Cover LockSecures the battery cover.
● (Alarm)Alarm ButtonUsed for setting and managing alarms.
● (Time)Time ButtonUsed for setting the current time.
● (-)Minus ButtonDecreases values or navigates menus.
● (+)Plus ButtonIncreases values or navigates menus.

1.2 Screen Display Indicators

The LCD screen provides essential information at a glance.

Diagram of the LCD screen with numbered labels pointing to different indicators.
Figure 3: LCD Screen Diagram
Screen Indicators
NumberIndicator
1Total Number of Alarms
2Remaining Alarms for the Day
3Time Display (12-hour / 24-hour format)
4Next Medication Time
5Battery Indication
6Volume Indication
7Ringtone Indication
8Wi-Fi Connection Indicator (for Wi-Fi version only)

2. Setup and Operation

2.1 Understanding Dosage Rings

The smart pill box includes 9 different dosage rings, each designed to correspond to the number of times medication needs to be dispensed daily. These rings help ensure accurate medication placement and dispensing.

Image showing 9 different dosage rings with varying numbers of segments, indicating different daily dose cycles.
Figure 4: Various Dosage Rings

The numbers and colored blocks on the dosage ring visually indicate the number of daily doses and the capacity in days. Blue areas represent one day's worth of medication. The number within each blue area shows how many times medication should be taken that day. Do not place medication in the white areas, as these represent excess pill cups.

Dosage Ring Capacity Examples
Daily DosesSupports Days of Medication
121 days
210 days
37 days
45 days
54 days
63 days
73 days
82 days
92 days

2.2 Installation Steps

  1. Place your medication into a pill cup, then insert the cup into the smart pill box. Do not place the pill cup at the dispensing outlet.
  2. The dosage ring must first be placed at the center of the smart pill box, ensuring the markings on the ring align with the pill cup's outlet.
  3. Fold the flap down and fix the dose ring in the proper position.

2.3 Using Pill Cup Stickers

To differentiate between different pill cups, the accessory includes two types of pill cup stickers: one with numbers from 1 to 21 and the other is blank, allowing you to mark as needed. Stick these labels on the pill cup slots.

2.4 Locking/Unlocking the Top Cover

The cover lock helps prevent accidental spillage and tampering. To lock, insert the key into the lock hole, close the cover, and turn the key counterclockwise. To unlock, insert the key and turn it clockwise.

Image showing the pillbox with a key inserted into the lock, indicating secure storage.
Figure 5: Secure Storage with Dual Mechanical Locks

2.5 Installing Batteries

Note: Before installing the batteries, ensure the top cover is locked.

  1. Turn the smart pill box upside down and insert the key into the lock hole of the battery cover. Turn the key clockwise to open.
  2. Remove the battery cover.
  3. Insert four (4) AA alkaline batteries, ensuring the polarity matches the “+” and “-” markings inside the battery compartment.
  4. Reinstall the battery cover, insert the key into the battery cover lock hole, and turn it counter-clockwise to lock it.

Note: If the screen shows a low battery icon, it's time to replace the batteries.

Diagram showing the Type-C main power port and the battery compartment for 4 AA batteries.
Figure 6: Dual Power Options (Type-C and AA Batteries)

2.6 Setting 12/24 Hour Mode

Press and hold the [Time] button for 3 seconds to toggle between 12-hour and 24-hour mode.

2.7 Setting Time

  1. Press the [Time] button briefly to enter the time setting mode. Press the [+] or [-] button to adjust the hour.
  2. Press the [Time] button to switch to minute adjustment mode. Press the [+] or [-] button to adjust the minutes.
  3. Long press [+] or [-] to adjust the time faster.
  4. Press the [Time] button to exit time setting and save changes, or press and hold [Time] for 2 seconds to cancel and exit time setting.

Note: The numbers on the display will flash to indicate which value is being adjusted.

2.8 Setting Alarms

You can set up to 9 alarms per day. Once set, the screen will display the total number of alarms and the next alarm time.

Adding Alarms:

  1. Press the [Alarm] button briefly to enter alarm setting mode.
  2. Press the [+] or [-] button to select the alarm number (from 1 to 9). After adjusting, press [Alarm] to confirm and proceed to set the alarm time.
  3. Use the [+] or [-] button to adjust the hour, then press [Alarm] to confirm and switch to minute adjustment.
  4. Use the [+] or [-] button to adjust the minutes, then press [Alarm] to confirm and return to adjusting the alarm number.
  5. Long press [+] or [-] to adjust the hour or minute faster.
  6. Repeat steps 2-4 to set additional alarms. Once finished, press and hold [Alarm] for 2 seconds to save the alarm settings and exit.

Deleting Alarms:

  1. Press the [Alarm] button briefly to enter alarm setting mode.
  2. Use the [+] or [-] button to select the alarm number (from 1 to 9) to delete.
  3. Press and hold [Alarm] for 2 seconds to delete the selected alarm.
  4. After deleting, press and hold [Alarm] for 2 seconds to save the alarm settings and exit.

Note: When an alarm goes off, the red light flashes to indicate a timeout for medication pickup.

2.9 Setting Alarm Volume

There are four volume levels: “Mute” “Low” (68dB), “Medium”(76.3dB) and “High” (79dB). The volume level is indicated by the “speaker” symbol on the screen.

Press and hold the [Time] button for 3 seconds to toggle between the different volume levels. A voice prompt will confirm the volume change (except in silent mode).

Diagram showing 4-level volume adjustment options: High (79dB), Medium (76.3dB), Low (68dB), and Mute.
Figure 7: 4-Level Volume Adjustment

2.10 Recording Alarm Ringtone

  1. Press and hold the [Record] button for 3 seconds to start recording.
  2. The screen will display an 11-second countdown for the recording.
  3. During the countdown, either press the [Record] button briefly or wait until the countdown ends to complete the recording.
  4. After the recording is complete, the recorded content will be played back.

Note: When the ringtone type is set to "C" (refer to "2.11 Ringtone Setting Types"), the recorded ringtone will play at the scheduled medication time.

Image showing the pillbox with sound waves and a microphone icon, indicating voice reminders.
Figure 8: Voice Reminders from Loved Ones

2.11 Ringtone Setting Types

There are three ringtones to choose from: “A,” “B,” and “C.” The ringtone type is displayed on the screen as "A", "B", or "C". Press and hold the [Time] button for 3 seconds to toggle between the different ringtone types.

Note: When switching to "C", you must wait for the recorded ringtone to finish playing before switching again.

2.12 Medication Reminder

When the scheduled medication time arrives, the smart pill box will sound an alarm, and the pill cup will automatically pop out. The alarm will stop when the pill cup is taken. Once the pill cup is placed back, it will automatically be retracted.

Note: If the pill is not taken before the next medication reminder, the next reminder will not repeat the previous missed dose notification.

Video: Demonstrates automatic pill dispensing and medication management.

2.13 Network Function (Wi-Fi Version Only)

  1. Search for "iDispenser" in your phone's app store (Apple AppStore, Google Play Store) and download it, or scan the QR code below.
    QR code for Apple AppStore
    Apple AppStore
    QR code for Google Play Store
    Google Play Store
    QR code for Direct Download
    Direct Download
  2. Long press the [+] button for 3 seconds to automatically enter the network pairing mode. The signal icon on the screen and the indicator light will start flashing.
  3. Note: If pairing is not successful within 3 minutes, the smart pill dispenser will exit the pairing mode.
  4. Open the "iDispenser" app on your phone, select "Add Device," and then choose the smart pill dispenser.
  5. Enter the Wi-Fi password of the network your phone is currently connected to, and then click "Next."
  6. Once pairing is successful, click "Finish." The signal icon on the smart pill dispenser's screen will light up, and you can use the "iDispenser" app to set up the smart pill dispenser.
  7. If you wish to disconnect, you can delete the device in the "iDispenser" app. (After deleting the device, the pill dispenser will still display the previous settings when connecting to other devices.)
  8. For detailed operating instructions on how to use the "iDispenser" app, scan the QR code below.
    QR code for iDispenser app instructions
    iDispenser App Instructions QR Code

2.14 Reset Settings

Simultaneously press the [Alarm] and [Time] buttons for 5 seconds to clear and reset all settings. After successful pairing, you can also reset all settings through the "iDispenser" app by going to the settings option at the bottom right, scrolling to the bottom, and clicking "Reset All Settings."

3. Maintenance

  • Keep the device clean by wiping it with a soft, dry cloth.
  • Avoid exposing the device to extreme temperatures or direct sunlight.
  • Ensure the pillbox is placed on a flat and stable surface to prevent accidental drops.
  • When not in use for extended periods, remove the batteries to prevent leakage.

4. Troubleshooting

4.1 Common Issues

  • Device not turning on: Check if batteries are correctly installed and charged, or if the Type-C power cable is connected.
  • Low battery indicator: Replace the AA batteries promptly.
  • Pill cup not dispensing: Ensure the dosage ring is correctly aligned and the pill cup is not obstructed.
  • Wi-Fi pairing failure: Ensure the device is in pairing mode (flashing signal icon), Wi-Fi password is correct, and pairing is attempted within 3 minutes. Try resetting the device and app.
  • Alarm not sounding: Check volume settings and ensure the alarm is correctly set.

5. Specifications

RETEKESS Smart Pillbox TH017 Specifications
FeatureTH017 Wi-Fi Smart Pill BoxTH017 Standalone Smart Pill Box
MaterialABSABS
Product Dimensions259*266.39*62.16mm259*266.39*62.16mm
Screen SpecificationsTN-LCD 60mm (circular)TN-LCD 60mm (circular)
Product Weight1365g1350g
Product ColorsWhite, Blue, Dark BrownWhite, Yellow, Dark Brown
Pill Box Compartments2121
Operating VoltageGreater than 4.3VGreater than 4.3V
Operating CurrentGreater than 38mAGreater than 560uA
Standby Power Consumption1.65mA560uA
Modulation MethodDSSS/OFDMN/A (Standalone)
Maximum Sound Decibels69dB72dB
Wi-Fi Frequency2.4G: 2400-2483MHz; 5G: 5180-5320 MHz; 5500-5700 MHz; 5745–5825 MHzN/A (Standalone)
Battery Life48h48h

6. User Tips

  • For optimal medication effectiveness, utilize the light-shielded design by keeping the lid closed when not in use.
  • To prevent accidental access by children or pets, always ensure the dual mechanical locks are engaged.
  • When setting up your medication schedule, consider recording a familiar voice message for alerts to make reminders more comforting and effective.
  • Regularly check the battery indicator on the LCD screen and replace AA batteries as soon as the low battery icon appears to ensure continuous operation.

7. Safety Precautions and Regulatory Information

7.1 General Precautions

  • Do not allow children to use or come into contact with this device.
  • Always place the medication box on a flat and stable surface.
  • Be aware that the medication cup will automatically pop out. Handle with care and avoid dropping the box, as it may damage the product or the pills inside.
  • The task of correctly organizing the medication, determining the dosage, and setting the timing is the responsibility of the patient, their caregivers, or healthcare providers.
  • Some medications need to be sealed to avoid exposure to air. Please follow the instructions provided by your doctor or pharmacist.
  • A low battery icon will appear in the top-right corner of the LCD screen. Please replace the batteries promptly to ensure the medication dispenser works properly.

7.2 Battery Safety

  • Turn off your device before removing or installing batteries. Store spare batteries securely. Dispose of used batteries immediately and safely.
  • The battery supply terminals are not to be short-circuited.
  • Do not replace the battery in any area labeled “Hazardous Atmosphere”. Any sparks created in a potentially explosive atmosphere can cause explosion or fire.
  • Exercise care in handling any battery, particularly when placing it inside a pocket, purse or other container with metal objects, as conductive material can cause short circuits and burns.
  • Dirty battery contacts need to be wiped with a clean dry cloth, both on the battery and in the appliance.
  • Batteries should be removed from the appliance when not being used for long periods of time (months). They should be enclosed in special protective packaging to protect from condensation.
  • Exhausted batteries are to be removed from the equipment.
  • Do not dismantle, open or shred batteries. Disposal of a battery into fire, or a hot oven, or mechanically crushing or cutting of a battery, can result in explosion.

7.3 FCC Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

7.4 Electromagnetic Interference/Compatibility

Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility. During transmissions, your radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so, such as hospitals or healthcare facilities.

7.5 Disposal Information

The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that all electrical and electronic products, batteries, or accumulators must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws and rules in your area.

Recycling symbol for electronic waste.
Figure 9: Waste Electrical and Electronic Equipment (WEEE) Symbol

7.6 Unauthorized Modification and Adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user’s authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.

8. Warranty and Support

Most new products carry a two-year manufacturer's warranty from the date of purchase. For warranty service, you will need to provide a receipt or proof of purchase from the actual seller for verification.

8.1 Exclusions from Warranty Coverage:

  • Any product damaged by accident.
  • Misuse or abuse of the product or as a result of unauthorized alterations or repairs.
  • If the serial number has been altered, defaced, or removed.

8.2 Authorized Accessories and Support:

Contact RETEKESS for assistance regarding repairs and service. For a list of RETEKESS-approved accessories for your radio model, visit the website: http://www.retekess.com

For further support, you can also refer to the full user manual PDF available at: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.