HOMCOM 834-807V00BK

Contents

HOMCOM 70cm Round Wall Mirror User Manual

Model: 834-807V00BK

1. Product Overview

The HOMCOM 70cm Round Wall Mirror is designed to enhance the aesthetics of any room, particularly bathrooms, bedrooms, living rooms, or entrances. It features a durable black metal frame, high-definition copper-free tempered glass, and a shatter-resistant film for added safety.

HOMCOM Round Mirror in a Modern Bathroom Setting
Figure 1: HOMCOM Round Mirror in a Modern Bathroom Setting
Composite image detailing mirror features and installation
Figure 2: Key Features and Installation Overview

This image illustrates the steel frame for glass protection, shatter-resistant film for safety, copper-free HD glass for clear reflections, 70cm diameter, its use as wall decoration, and the effortless wall installation method.

2. Safety Information

  • Handle the mirror with care to avoid damage or injury.
  • Ensure the wall surface is suitable and strong enough to support the mirror's weight before installation.
  • Keep out of reach of children during installation.
  • The mirror features a shatter-resistant film to prevent debris dispersion in case of breakage, but caution should still be exercised.

3. Setup and Installation

The HOMCOM round mirror is designed for easy wall mounting and comes with all necessary accessories. No assembly is required for the mirror itself.

3.1. Unpacking

  1. Carefully remove the mirror from its packaging.
  2. Inspect the mirror for any signs of damage. If damaged, contact customer support immediately.
  3. Keep packaging materials away from children.

3.2. Wall Mounting

The mirror is equipped with two hooks for secure wall installation. Refer to Figure 3 for a visual guide.

  1. Choose a suitable location on your wall. Ensure there are no hidden electrical wires or pipes.
  2. Measure the distance between the two hanging points on the back of the mirror.
  3. Mark the corresponding points on the wall using a pencil.
  4. Drill holes at the marked points. Use an appropriate drill bit for your wall type (e.g., plasterboard, brick, concrete).
  5. Insert wall plugs (if required for your wall type) into the drilled holes.
  6. Screw the provided hooks or screws into the wall plugs, leaving a small portion exposed to hang the mirror. Ensure they are securely fastened and level.
  7. Carefully lift the mirror and align its hanging points with the installed hooks/screws.
  8. Gently lower the mirror onto the hooks, ensuring it is stable and flush against the wall.
  9. Verify that the mirror is securely mounted before releasing it.
Effortless Wall Installation Diagram
Figure 3: Effortless Wall Installation Diagram

4. Operating Instructions

This mirror provides clear and precise reflections thanks to its high-definition, copper-free tempered glass. Its primary function is as a reflective surface and a decorative element.

  • The round design adds a touch of sophistication to any room.
  • The steel frame protects the edges of the mirror from splintering, ensuring durability.
  • The shatter-resistant film enhances safety by preventing glass debris from scattering if the mirror breaks.

5. Maintenance

To ensure the longevity and clarity of your HOMCOM mirror, follow these simple maintenance guidelines:

  • Cleaning: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to avoid streaks and drips. Wipe gently until clean and dry.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, ammonia-based products, or harsh chemicals, as these can damage the mirror's surface or frame finish.
  • Frame Care: Wipe the metal frame with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying.
  • Environment: While suitable for bathrooms, avoid prolonged exposure to excessive humidity or direct water spray to prevent potential damage to the frame or backing.

6. Troubleshooting

Here are some common issues and their potential solutions:

  • Streaks after cleaning: Ensure you are using a clean, lint-free cloth and a high-quality glass cleaner. Avoid applying cleaner directly to the mirror; spray it onto the cloth first.
  • Mirror appears distorted: This mirror uses high-definition, copper-free glass designed for clear reflections. If distortion is observed, ensure the mirror is mounted flat against the wall and the wall surface is even.
  • Mirror feels loose on the wall: Re-check the wall mounting. Ensure the hooks/screws are securely fastened into the wall and the mirror is properly seated on them. If necessary, reinforce the wall plugs or use stronger anchors.
  • Frame damage: If the frame is scratched or dented, minor touch-ups can sometimes be done with appropriate paint for metal. For significant damage, consider contacting customer support.

7. Specifications

Feature Specification
Model Reference 834-807V00BK
Color Black
Materials Metal, Tempered Glass
Mirror Dimensions Ø 70 x 2.5 H cm (Diameter 70cm, Depth 2.5cm)
Mirror Thickness 3.5 mm
Net Weight 7.0 kg
Package Dimensions (L x W x H) 79 x 79 x 7 cm
Dimensions of the Round Mirror (70cm Diameter)
Figure 4: Dimensions of the Round Mirror (70cm Diameter)

8. User Tips

  • Optimal Placement: Consider placing the mirror opposite a window or light source to maximize natural light and make a room feel larger and brighter.
  • Decorative Accent: Use the mirror as a focal point in a room. Its sleek design complements various interior styles.
  • Regular Cleaning: A quick wipe-down with a microfiber cloth daily can prevent dust buildup and keep your mirror sparkling.

9. Support

For any questions, concerns, or assistance with your HOMCOM mirror, please contact the seller or retailer from whom you purchased the product. Provide your model number (834-807V00BK) and purchase details for faster service.

© 2024 HOMCOM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.