1. Product Introduction
The HOMALL 90L Ultra Large Volume Automatic Litter Box is designed to provide a convenient and hygienic solution for cat owners. It features smart APP control, extensive safety mechanisms, and efficient cleaning capabilities.
Key Features:
- APP Smart Remote Monitoring: Monitor usage frequency, duration, and cat weight. Remotely control cleaning cycles, switch between sleep and manual modes, set delayed cleaning times, and generate health reports. Supports 2.4 GHz WiFi only.
- 90L Extra Large Capacity: The spacious interior accommodates cats up to 10 kg. The 8.5-liter waste container reduces the frequency of emptying, lasting up to 10 days for a single cat.
- Nine-Fold Safety Protection: Equipped with a motion radar, four infrared sensors, and four gravity sensors to monitor your cat's position in real-time. Operation immediately interrupts if a cat approaches or enters, preventing bruising.
- Dust-Free Design: Features a two-layer, leak-proof foot cushion and removable, non-slip treads to filter and collect spilled litter. A raised entrance and closed structure minimize litter scattering.
- Automatic Cleaning & Intelligent Odor Control: Cleaning cycles activate automatically after use. An integrated odor neutralization and fragrance system breaks down odors and prevents bacterial growth.
Main Structure Description:
The unit consists of a top cover, rotary drum, pedal, handle, collection bin, control buttons, cover plate, power socket, and support legs.

Main product image showing the 90L automatic litter box with app interface and accessories.

Diagram of app control features including data view, remote cleaning, weight display, and sleep mode.

Illustration of the litter box capacity suitable for cats between 1.5kg and 10kg.
2. Setup and Installation
Unboxing and Initial Assembly:
- Carefully remove all components from the packaging.
- Place the main unit upside down on a stable surface. Install the four support legs into their corresponding positions and gently pat them to ensure they are securely in place.
- Place the machine on a hard, flat floor. Ensure the machine does not shake. Avoid placing on carpets or soft surfaces.
- Install the rotary drum and the top cover.
- Insert a garbage bag into the collection bin.
- Install the litter mat at the entrance.
- Install the solid aromatherapy box into its designated slot.
Power Connection:
- Insert the power adapter cable into the power socket located at the rear of the product.
- Plug the other end of the power adapter into a suitable electrical outlet (220-240V).
Weighing Sensor Calibration:
- After connecting to power and Wi-Fi, place a known weight object (greater than 500 grams) inside the litter box.
- Remove the object after 10 seconds and check if the displayed weight is accurate.
Video Guide:
This video demonstrates the unboxing, assembly, and initial setup of the automatic cat litter box.
3. Operating Instructions
APP Smart Control:
- Download and install the "Tuya Smart" APP from your mobile app store.
- Ensure your phone's Wi-Fi and Bluetooth are turned on.
- Press and hold the litter box's Wi-Fi button for 3 seconds until the green light flashes and a beep sounds.
- Open the "Tuya Smart" APP, click "Add Device" in the upper right corner. Wait for automatic device discovery, then add the device and enter your Wi-Fi password to complete the connection.
- If your router's account or password changes, you must reconfigure the network by repeating the above steps and holding the Wi-Fi button for 3 seconds.
- Regularly connect the device to Wi-Fi to ensure it receives the latest updates.
Attention: The device only supports 2.4G Wi-Fi band. Ensure your router is set to 2.4G band when connecting.

App interface showing remote control, air purification, cat statistics, and night mode features.
Control Panel Indicators:
| Button | Indicator State | Meaning |
|---|---|---|
| Wi-Fi Button | Yellow light on | Network disconnected |
| Blinking yellow light | Network connecting | |
| Cleaning Button | Green light on | Normal operation / Network connection successful |
| Blinking green light (fast) | Bio-radar triggered | |
| Blinking green light (slow) | Pause (press once during operation) | |
| Blinking yellow light (fast) | Weight sensor triggered / Cat litter being added | |
| Yellow light on | Motion radar triggered / Weight calibration | |
| Blinking yellow light | Entrance infrared beam triggered / Collection bin infrared beam triggered / Weighing overload / Motor protection | |
| Blinking yellow twice | Fan protection | |
| Blinking yellow three times | Support legs not installed properly |
4. Cleaning and Maintenance
Adding Cat Litter:
- Unplug the power cord, open the top cover, and add cat litter.
- Pour an appropriate amount of cat litter. For first use, 5 liters of special litter is recommended.
- Do not pour cat litter beyond the height of the anti-mat inside the drum.
Important Notes for Adding Litter:
- The weight of cat litter should not exceed 5KG.
- The amount of cat litter should not exceed the height of the anti-mat in the bucket.
- Always unplug the power before adding cat litter and plug it back in after adding. Alternatively, short press the cleaning button once after adding litter to reset the gravity.
- It is recommended to use tofu cat litter with a diameter not exceeding 1.5MM.

Compatible litter types: Tofu, Bentonite, Mineral, Mixed.
Installing Garbage Bags:
- Pull out the collection bin from the bottom.
- First, set the garbage bag to the two rear corners, then pull it back and stick it to the front two clasps. Smooth the bag and reset the collection bin.
Cleaning the Collection Bin:
- Pull out the collection bin.
- Remove the garbage bag and tighten its handle to seal it.
- The collection bin can be washed with clean water. Dry it thoroughly before loading a new garbage bag and resetting.
Rotary Drum Cleaning:
- Extract the cover from the side of the top cover by lifting it upward.
- Pull out the rotary drum.
- Wipe the inside of the drum with a dry towel.
- Lift the screen from its root to detach it from the rotary drum.
- Take out the screen.
- The rotary drum can be cleaned directly with water.
- Clean the screen separately, dry it, and then reset it.
Aromatherapy Box Replacement:
- Power off the device. Find the cover plate on the side and remove it.
- Take out the old aromatherapy box and replace it with a new one (ensure protective film is removed from the new box).
- Reset the cover plate of the product.

Removable step and litter mat for clean paws.
5. Troubleshooting (Fault Self-Test)
If simple troubleshooting steps do not resolve an issue, please contact customer service. Do not attempt to disassemble or repair the product yourself.
| Problem | Cause | Treatment Method |
|---|---|---|
| Networking failure | Product not energized | Electrify the product |
| No network in product location | Check for network availability | |
| Phone Bluetooth not on | Turn on Bluetooth | |
| Wi-Fi not 2.4G signal | Adjust Wi-Fi to 2.4G signal | |
| Drum not rotating when powered on | Drum package not removed | Remove foam from top and pearl-cotton from bottom of drum |
| Cleaning button yellow light flashing | Entrance infrared sensor triggered | Check entrance for blocking objects |
| Collection bin infrared sensor triggered | Clear collection bin; Check if sensor is blocked | |
| Weighing overload (>30kg) | Calibrate weight; Check objects in bucket | |
| Motor protection (current >1A) | Check motor load against standard (<1A) | |
| Cleaning button yellow light flashing twice | Fan protection | Contact customer service |
| Cleaning button yellow light permanently on | Motion radar triggered; Weighing and calibration | Check for moving objects near machine; Recalibrate |
| Cleaning button yellow light flashing rapidly | Weight sensor triggered; weight over 50kg; cat litter being added | Calibrate weight; Check objects in bucket |
| Cleaning button yellow light flashing three times | Support legs not installed properly | Check that four legs are smoothly and correctly installed; Calibrate weight; Check for foreign objects |
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | HOMALL |
| Model Number | GH-ICB01 |
| Housing Material | ABS |
| Rated Voltage | DC 12V (Adapter input: 220-240V) |
| Rated Power | 9W |
| Rated Current | 1.5A |
| Product Dimensions (L*W*H) | 55.6 x 51.2 x 58.5 cm |
| Product Package Size (L*W*H) | 57.0 x 53.0 x 51.5 cm |
| Connection Mode | 2.4G WiFI ONLY |
| Recommended Ambient Temperature | 4-40 °C |
7. User Tips
- Easy Installation: Users have reported quick and straightforward installation, often taking as little as 15 minutes with the app.
- Multi-Cat Friendly: The large capacity and efficient cleaning make it suitable for households with multiple cats.
- Consumables: For replacement aromatherapy boxes and garbage bags, please check with the seller or manufacturer for compatible options.
8. Safety Warnings
To ensure safety and avoid injury or property damage, strictly observe the following safety precautions. Misuse may result in accidents.
Prohibited Actions:
- Do not expose to direct sunlight.
- Keep away from flammable or explosive materials.
- Do not use in wet areas or with wet hands.
- Do not place on uneven ground, carpets, or soft surfaces.
- Do not extend the power cord arbitrarily to avoid fire hazards.
General Safety Guidelines:
- Place the machine in a cool, dry indoor area, away from strong sunlight to prevent component aging.
- Keep away from young children and individuals with intellectual disabilities unless supervised by a guardian.
- Do not use gasoline or organic solvents to wipe the fuselage. Do not wash or immerse the product in water.
- Disconnect the power switch when not in use for a long time, and empty the cat litter and feces from the collection bin.
- Ensure the machine is correctly installed and fixed before use.
- Do not connect a booster transformer to the power plug.
- Do not use the machine in areas with water splashing or in cabinets with other electrical appliances.
- Maintain at least 10cm distance from walls and ensure no items are placed under or around the machine.
- Handle the product gently when moving; avoid dragging it.
- Do not place other items on top of the product, as this may affect normal operation.
- Only use special accessories provided by the manufacturer.
- For cats smaller than 1.5kg (3.3lb), please use manual mode.
- If the power cord is damaged, it must be replaced by the manufacturer, maintenance department, or qualified professionals to avoid danger.

Diagram illustrating the nine-fold safety sensor system with motion, infrared, and weight sensors.
9. Warranty and Support
Warranty:
This product comes with a 1-year warranty from the date of purchase.
Customer Support:
For any issues not resolved by the troubleshooting guide, or for maintenance inquiries, please contact the customer service hotline or an authorized service center. Do not attempt to disassemble or repair the product yourself, as this may void the warranty and cause further damage or hazards.
Due to continuous product improvement, specifications and parameters may be subject to change. Always refer to the product nameplate for the most accurate information.
This device contains a radio transmitting module with model approval code CMITID:2020DP6462 and device model: WBR3.
A user manual PDF is available for download from the seller's website for more detailed information.