LAUNCH CRP129 MT

Contents

LAUNCH CRP129 MT Motorcycle Scanner User Manual

Model: CRP129 MT

1. Overview

1.1 Introduction

This device is an Android-based multi-functional diagnostic tool designed for motorcycles. With a wide coverage of mainstream motorcycle brands, it delivers fast and complete diagnostic functions that technicians need to diagnose and repair motorcycles.

1.2 Main Features

  • Support fault diagnostics for all systems of the current mainstream motorcycle models;
  • Support to read DTCs, clear DTCs, read data stream, view version information, etc.;
  • One-key software upgrade;
  • Specially designed for Android platform, the software interface is simple and easy to operate.

1.3 Components & Controls

Familiarize yourself with the main components and controls of the CRP129 MT device:

LAUNCH CRP129 MT scanner showing numbered components and screen menu
Figure 1: LAUNCH CRP129 MT Device Layout
  1. Charging LED: Red indicates charging, Green indicates fully charged.
  2. LCD: Displays test results and user interface.
  3. USB Type-C Port: Connects the charging cable for power.
  4. DB-15 Diagnostic Connector: Connects the diagnostic cable to the motorcycle.
  5. Power Button: Press and hold to turn on/off; press to wake up or lock the screen.
  6. HOME Button: Navigates to the Main Menu screen.
  7. Selection Buttons (Up/Down/Left/Right): Moves cursor for selection and navigates pages.
  8. OK Button: Confirms a selection or action.
  9. Return Button: Exits the current screen or returns to the previous screen.

2. Specifications

Technical Specifications of LAUNCH CRP129 MT
FeatureSpecification
Screen5" touch screen (1280*720 resolution)
Operating SystemAndroid 8.1
CPU1.3GHz Quad-core
RAM2GB
Storage32GB
Battery6000mAh (with NTC protection), built-in rechargeable Lithium Polymer
Communication InterfaceOBD-II
Wireless Support2.4G & 5.0G Wi-Fi
OBDII Input Voltage Range9~18V
Charging InputDC 5V 2A charging cable
Dimensions228 mm x 125 mm x 34 mm
Operating Temperature0°C to 50°C (32°F to 122°F)
Storage Temperature-20°C to 70°C (-4°F to 158°F)
Charging Temperature0°C to 40°C (32°F to 104°F)
Software Update2 Years Free Update Included (then subscription)
Supported LanguagesEnglish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Traditional Chinese
CertificationCE, RoHS

3. Packing List

The following items are typically included in the LAUNCH CRP129 MT package. Please check the contents upon receipt.

Image showing the LAUNCH CRP129 MT scanner and a comprehensive set of diagnostic cables and adapters in a carrying case.
Figure 2: LAUNCH CRP129 MT Package Contents
  • LAUNCH CRP129 MT Main unit x 1
  • Main Diagnostic cable x 1 (OBD II diagnostic cable)
  • Type-C USB cable x 1 (Charging cable)
  • HD-4 adapter x 1
  • HD-6 adapter x 1
  • DCT adapter x 1
  • VIC-8 adapter x 1
  • KT-6 adapter x 1
  • KSK-4+6 adapter x 1
  • SZK-4+6 adapter x 1
  • YMH adapter x 1
  • VSP-3 adapter x 1
  • VSP-6 adapter x 1
  • HON-4 adapter x 1
  • B-10 adapter x 1
  • BR-6 adapter x 1
  • Clipper x 1 (Power cable clips)
  • Motorcycle jumper Z x 1
  • Motorcycle jumper Y x 1
  • Motorcycle jumper 2 x 1
  • Motorcycle jumper 3 x 1
  • Motorcycle jumper 4 x 1
  • Motorcycle jumper 5 x 1
  • Motorcycle jumper 7 x 1
  • Quick start guide x 1
  • Instruction Manual (PDF) - reference this document for full details.
  • Box x 1

Note: The packing list is for reference only. For details, consult the seller or check the packing list supplied with this tool together. A detailed operation manual is integrated into the tool for quick reference, and a PDF version is available at this link.

4. Setup and Initial Use

4.1 Charging and Turning On/Off the Tool

Charging the Tool

It is recommended to charge the tool using the supplied charging cable. Plug one end of the included charging cable into the USB Type-C port of the tool, and the other end to an external power supply device. Once the charging LED illuminates solid green, it indicates that the battery is fully charged.

For motorcycles with a 16-pin diagnostic port, the tool automatically receives power from the motorcycle when connected directly using the supplied diagnostic cable.

Note: Do not charge the tool using the charging cable while the tool is communicating with a motorcycle.

Turning On/Off the Tool

  • To turn on: Press and hold the POWER button.
  • To turn off: Press and hold the POWER button until a popup screen appears, then tap "Power Off".

4.2 Getting Started (First-time Use)

If this is your first time using the tool, you will go through the following system settings:

Diagram showing 4 easy setup steps: Connect to Wi-Fi, Download Diagnostic Software, Connect CRP129 MT to Motorcycle, Start Motorcycle.
Figure 3: Easy Setup in 4 Steps
  1. Power On: Press the power button to turn on the device.
  2. Welcome Screen: The screen displays a welcome page. Tap "Start" to proceed.
  3. Language Selection: Choose your desired system language (e.g., English, Spanish, German) and tap "Next step".
  4. Time Zone Setup: Choose the desired time zone and tap "Next step" to enter the WLAN setup screen.
  5. WLAN Setup: Slide the Wi-Fi switch to ON. The system will search for available wireless networks. Select your desired WLAN access point/network.
    • If the selected network is open, the tool will connect directly.
    • If the selected network is encrypted, you must enter the correct security password.
  6. Workshop Information: After network connection, tap "Next step" to configure workshop information. Input the required details and tap "Next step".

    Note: Once configured, this information will be automatically added to reports.

  7. User Agreement: Carefully read all terms and conditions of the user agreement, check the box before "Agree to all the above terms", and tap "OK" to finish the sign-up process and navigate to the Main Menu.

5. Operating the Diagnostic Tool

5.1 Main Menu Functions

The main menu screen provides access to the following function modules:

ModuleDescription
Local DiagnoseConfigures the tool for professional diagnostic functions.
Remote AssistanceEnables remote diagnosis by technicians for faster repair.
Software UpdateUpdates motorcycle diagnostic software and APK. Requires a stable network connection.
Diagnostic RecordAllows viewing of recorded running parameters or waveform graphs from diagnostics.
Know Your CustomerAssists with business analysis, customer management, diagnosis statistics, and service ranking.
MineChecks saved reports, order information, and system settings.
ToolboxProvides practical add-on modules including battery voltage, diagnostic software clear, firmware fix, DTC library, diagnostic record, feedback, image, user manual, etc.
MoreIncludes Online support and LAUNCH Academy.

5.2 Diagnostic Connection

To perform diagnostics, connect the CRP129 MT to your motorcycle:

  1. Turn Ignition Off: Ensure the motorcycle's ignition is off.
  2. Locate Diagnostic Port: Find the diagnostic port on your motorcycle. Its location varies by make, year, and model. Refer to your motorcycle's service manual if needed.
  3. Connect Tool: Connect the CRP129 MT to the motorcycle using one of the following methods:
    • For 16-pin diagnostic port: Use the supplied OBD II diagnostic cable to connect the tool directly to the motorcycle's diagnostic port.
    • For non-16-pin diagnostic port: Use the supplied diagnostic cable along with the specific adapter for your motorcycle.
      Diagram showing various diagnostic connectors and how to connect the diagnostic cable to a motorcycle adapter and then to the scan tool.
      Figure 4: Diagnostic Cable and Adapter Connection (Kawasaki adapter example)
      1. Select the specific motorcycle adapter (e.g., HON-4, KSK-4+6, SZK-4+6, HD-6, YMH, HD-4, VSP-6, B-10, VIC-8, DCT, BRP-6, KTM-6, VPS-3, Multi-JP, Clipper) and connect one end to the motorcycle diagnostic port.
      2. Plug one end of the main diagnostic cable into the motorcycle adapter.
      3. Plug the other end of the main diagnostic cable to the DB-15 diagnostic connector of the tool. Tighten the captive screws.
  4. Turn Ignition On: Turn the motorcycle's ignition on. The engine can be off or running.
  5. Start Diagnostics: The tool is now ready for diagnostics.

Caution: Do not connect or disconnect any test equipment while the ignition is on or engine running.

5.3 System Diagnostics

The "Local Diagnose" function is designed for diagnosing electronic control systems. The tool must correctly identify the motorcycle to communicate and execute commands. Menus and test functions may vary by motorcycle model, make, and year. Follow on-screen instructions.

Notes:

  • Before diagnosis, ensure the corresponding motorcycle software is installed.
  • The diagnostic menu may vary by the motorcycle's make, model, and year.
Diagram illustrating OE-Level All Systems Diagnostics, showing a motorcycle and scanner, with diagnostic points like Engine, ABS, TPMS, Trans, EPB, Speedo Module, and functions like Read ECU info, Read & Clear DTCs, Freeze Frame, Live Data Stream.
Figure 5: OE-Level All Systems Diagnostics Overview

To diagnose a motorcycle manually, follow this general flowchart:

  1. Select "Local Diagnose".
  2. Select Motorcycle Manufacturer.
  3. Select Motorcycle Model.
  4. Select Scan Mode (Automatic System Detection or Manual System Selection).
  5. Select Test Function (e.g., Read Version Information, Read Fault Code, Clear Fault Code, Read Data Stream).

5.3.1 Health Report (Quick Test)

This function quickly accesses all electronic control units (ECUs) and generates a detailed report on motorcycle health. Tap "Health Report" on the test item selection screen to start scanning. Fault codes appear in red, normally working systems in green.

On-Screen Buttons:

  • Enter: Selects other test functions.
  • Report: Saves diagnostic results as a report (accessible via "Mine" -> "My Report").
  • Clear Code: Clears existing diagnostic trouble codes.

5.3.2 System Scan

Quickly scans installed systems. After scanning, tap the system to be tested to display the test function screen.

5.3.3 System Selection

Manually select the test system and function step-by-step. Tap "System Selection" on the test item selection screen, then select the desired system (e.g., EFI) to enter the test function selection screen.

  • Version Information: Displays module information (hardware/software numbers).
  • Read Fault Code: Displays detailed DTC records.

    On-Screen Buttons: Help (DTC info), Code Search (online info), Report (save to "Mine" -> "My Report").

    Note: Never replace parts based solely on DTC definition. Always follow testing procedures.

  • Clear Fault Code: Erases codes after repairs. Ensure ignition is ON and engine OFF.

    Warning: Do not erase codes if taking the motorcycle to a service center, as valuable information may be lost. Clearing codes does not fix underlying problems.

  • Read Data Stream: Retrieves and displays live data and parameters from the ECU.

    On-Screen Buttons: Select All (select all items), Unselect (deselect all items), OK (confirm and proceed).

    Display Modes: Value (text list), Graph (waveform graphs), Combine (merge graphs for comparison).

    Image showing the scanner screen displaying 8-in-1 graphic data stream, with options to compare, record, and replay data.
    Figure 6: Graphic Real-time Live Data Stream

    On-Screen Buttons for Data Stream: ✅ (view waveform graph), Combine (merge waveforms), Report (save diagnostic report), Record (start recording diagnostic data).

5.3.4 Special Function

This option provides coding, reset, relearn, and other service functions to restore motorcycles to functional status after repair or replacement. Available tests vary by motorcycle manufacturer, model, and year. Select the target special function and follow on-screen instructions.

Image showing multiple reset services including Oil Reset, ECU Initialization, Throttle Self-Learning, Stepper-Motor Calibration, Adaptive Value Reset, Clutch Match, VIN Writing, TPMS Setup, Service-Interval Reset, Co-Value Adjustment, Idle-Speed Optimization, ECU Memory Clear.
Figure 7: Multiple Reset Services

Commonly-used reset services include: ECU Initialization, Throttle Self-Learning, Stepper-Motor Calibration, Adaptive Value Reset, Clutch Match, VIN Writing, TPMS Setup, Service-Interval Reset, Co-Value Adjustment, Idle-Speed Optimization, ECU Memory Clear, and more.

Note: Some services depend on the motorcycle model. Please verify compatibility before purchase.

5.4 OBDII Diagnostics

This option provides a quick way to check for DTCs, isolate MIL causes, check monitor status, verify repairs, and perform emission-related services.

Image showing complete OBD2 tests for motorcycles, including I/M Readiness, Freeze Frame, Live Data, O2 Sensor Test, EVAP Test, On-Board Monitor, Vehicle Info, DTC Library, with flags for multiple languages.
Figure 8: Complete OBD2 Tests for Motorcycles

After connecting the tool, tap "OBDII". The tool will automatically detect the communication protocol. Once a link is established, the Monitor Status screen appears. Tap "ENTER" to access the function list:

  1. Read I/M Readiness: Checks if emission-related systems are operating properly for Inspection and Maintenance testing.
  2. Read Live Data: Retrieves and displays live data and parameters from the motorcycle's ECU.
  3. Read Freeze Frame: Captures a snapshot of operating conditions when an emission-related fault occurs.
  4. Read Fault Code: Identifies the section of the emission control system that has malfunctioned.
  5. Clear Fault Code: Erases codes from the motorcycle after repairs. Ensure ignition is ON and engine OFF.
  6. Test Results: On-Board Monitoring Test: Retrieves test results for non-continuously monitored emission-related powertrain components.
  7. Control Operation of On-Board Component/System: Accesses specific subsystem and component tests.
  8. Read Vehicle Information: Retrieves vehicle identification information (VIN, Calibration ID).
  9. EU OBFCM: Displays On-Board Fuel Consumption Monitoring data to check CO2 emissions and fuel/energy consumption compliance with EU regulations.

5.5 History

The tool records every diagnostic session. The "History" function provides direct access to previously tested motorcycles, allowing you to resume from the last operation. Tap "History" on the "Local Diagnose" screen to view diagnostic records by date.

  • Tap a motorcycle model to view details of the last diagnostic report.
  • To delete history: Select items and tap "Delete". To delete all, tap "Select All" then "Delete".
  • Tap "Quick access" to navigate directly to the function selection page of the last diagnostic operation.

5.6 Remote Assistance

The "Remote Assistance" function helps repair shops or technicians with remote diagnosis via TeamViewer. Tap "Remote Assistance" on the Main Menu. Provide your device's ID number to the remote technician for assistance.

6. Maintenance

6.1 Software Update

This function allows you to update diagnostic software. Updates are periodic, and it's recommended to install the latest version for best performance. The tool includes two years of free updates. After this period, software remains usable but cannot be updated without purchasing a Subscription Renewal Card.

To update: Tap "Software Update" on the Main Menu. Select the target software and tap "Update". Downloading may take several minutes, and packages will install automatically.

Note: Software update requires a stable network connection.

6.2 Diagnostic Software Clear

This option allows you to delete diagnostic software that is not frequently used, freeing up storage space.

6.3 Firmware Fix

Use this module to upgrade and fix diagnostic firmware. During the fixing process, do not cut power or switch to other screens.

6.4 Clean Up

This option allows you to clear cache files and free up storage space on the device.

7. Troubleshooting

7.1 Diagnostic Record

The "Diagnostic Record" function allows you to view recorded running parameters or waveform graphs. Tap "Diagnostic Record" on the Main Menu, select the target record, choose desired data stream items, and tap "OK" to play back.

On-screen Buttons:

  • Graph: Displays parameters in waveform graphs.
  • Combine: Merges graphs for data comparison (items marked in different colors).
  • Value (default): Displays parameters as text in a list format.
  • Auto Playback: Automatically plays back selected data stream items.

7.2 DTC Library

This option allows you to retrieve detailed descriptions of specific Diagnostic Trouble Codes (DTCs) from the built-in database. Swipe the screen to alter values, press "OK", and the screen will display the DTC definition.

7.3 Feedback

Use this module to send feedback about diagnostic problems for further analysis and troubleshooting by the manufacturer.

7.4 FAQ (Frequently Asked Questions)

This module lists frequently asked questions and answers related to the tool.

8. Settings

The "Mine" module on the main menu allows you to customize various system settings:

  • My Report: Check and manage saved diagnostic reports, sorted by date and make. Use the search icon to filter.
  • My Order: Check your order information.
  • Units of Measurement: Set the measurement unit (Metric System or Imperial System).
  • Screen Capture: Toggle the screen capture icon on/off. When on, a screenshot icon floats on the upper right corner.
  • Display/Brightness: Adjust standby time and screen brightness. Reducing brightness conserves power.
  • Sound: Adjust volume and other sound settings.
  • Network: Manage WLAN connections for updates and email.
  • Time Zone: Set the device's time zone.
  • Language: Change the system language to your target language.
  • Workshop Information: Configure workshop details, which are added to reports.
  • Recovery: Reset the tool to default factory settings.

    Warning: Resetting may cause data loss. Proceed with caution.

  • About: Displays hardware configuration and license agreement information.

9. User Tips

  • Check Compatibility: Before performing diagnostics or special functions, always verify that your specific motorcycle make, model, and year are supported for the desired function. If unsure, consult the official product documentation or customer support.
  • Keep Software Updated: Regularly update your diagnostic software via Wi-Fi to ensure access to the latest vehicle models, features, and bug fixes.
  • Secure Connections: Always ensure all diagnostic cables and adapters are securely connected before turning on the ignition or starting diagnostics to prevent damage to the tool or vehicle.

10. Safety Precautions and Warnings

To prevent personal injury or damage to vehicles and/or the tool, read this user's manual carefully and observe the following safety precautions whenever working on a vehicle:

  • Never use this tool for any application other than for which it was designed.
  • There are no user serviceable parts. Have the device serviced by a qualified repair person using only identical replacement parts. Disassembling the device will void the warranty.
  • Battery Caution: This tool contains an internal Lithium Polymer battery. Do not disassemble, crush, pierce, or dispose of the battery in fire or water to reduce the risk of fire or burns.
  • This product is not a toy. Do not allow children to play with or near this item.
  • Do not expose the device to rain or wet conditions.
  • Do not place the device on any unstable surface.
  • Never leave the device unattended during charging. The device must be placed on a non-flammable surface during charging.
  • Handle the device with care. If dropped, check for breakage or other conditions affecting operation.
  • Do not operate the tool in explosive atmospheres (flammable liquids, gases, heavy dust).
  • Keep the tool dry, clean, and free of oil, water, or grease. Use a mild detergent on a clean cloth for cleaning.
  • People with pacemakers should consult their physician(s) before use, as electromagnetic fields could cause pacemaker interference.
  • Always perform automotive testing in a safe environment.
  • Do not attempt to operate or observe the tool while driving a vehicle, as this can cause driver distraction and fatal accidents.
  • Wear safety eye protection that meets ANSI standards.
  • Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
  • Operate the vehicle in a well-ventilated work area. Exhaust gases are poisonous.
  • Chock the drive wheels and never leave the vehicle unattended while running tests.
  • Use extreme caution when working around ignition coil, distributor cap, ignition wires, and spark plugs, as these create hazardous voltages.
  • Put the transmission in P (for A/T) or N (for M/T) and ensure the parking brake is engaged.
  • Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires within the work area.
  • Do not connect or disconnect any test equipment while the ignition is on or the engine is running.

FCC and RF Exposure Information

This device complies with FCC Rules and Innovation, Science and Economic Development Canada's licence-exempt RSSs. Operation is subject to not causing harmful interference and accepting received interference.

The device meets government requirements for exposure to radio waves. The SAR limit is 1.6 W/kg. For body-worn operations, a minimum separation distance of 0mm must be maintained. Use only supplied or approved antennas and avoid metallic components in body-worn accessories.

The device for operation in the band 5150-5250MHz is only for indoor use. This Class B digital apparatus complies with Canadian ICES-003.

11. Warranty and Support

11.1 Warranty Information

This warranty is expressly limited to persons who purchase LAUNCH products for purposes of resale or use in the ordinary course of the buyer's business.

LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user.

This warranty does not cover any part that has been abused, altered, used for a purpose other than for which it was intended, or used in a manner inconsistent with instructions regarding use. The exclusive remedy for any automotive meter found to be defective is repair or replacement, and LAUNCH shall not be liable for any consequential or incidental damages.

Final determination of defects shall be made by LAUNCH in accordance with procedures established by LAUNCH. No agent, employee, or representative of LAUNCH has any authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.

11.2 Customer Service

If you have any questions on the operation of the unit, contact the seller, or contact LAUNCH TECH Service Center:

To resolve your problems quickly and efficiently, clearly indicate the Serial Number of your product when giving issue feedback.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.