1. Product Introduction
The RETEKESS TR642 is a multifunctional audio device designed for both home and outdoor use. It combines various playback options including CD, cassette, USB, TF card, Bluetooth, AUX, and FM/AM radio. The unit features a portable design with an integrated handle, long-lasting battery life, stereo speakers, and a remote control for convenient operation.
Package Contents

Image: Contents of the TR642 package.
- TR642 CD Boombox x 1
- Remote Control x 1 (requires 2 x AAA Batteries, not included)
- Power Cable x 1
- Aux Cable x 1
- Product Manual x 1
- Packaging Box x 1
2. Setup
2.1 Powering On and Charging
The TR642 is equipped with a built-in 7.4V/5000mAh high-capacity lithium battery. For initial use or after prolonged storage, ensure the device is fully charged.
- Connect the provided power cable to the Type-C IN port on the unit.
- Connect the other end to a compatible 5V 2A power adapter (not included).
- Charge for at least 15 minutes if the unit does not power on.

Image: Battery specifications and charging port.

Image: Type-C charging input.
2.2 Remote Control Battery Installation
The remote control requires 2 x AAA batteries (not included).
- Open the battery compartment on the back of the remote control.
- Insert 2 AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment securely.
2.3 Antenna Extension
For optimal FM/AM radio reception, fully extend the telescopic antenna located on the back of the unit.
3. Operating Instructions
3.1 Main Unit Controls Overview

Image: Front panel controls and their functions.
- Power on/off
- Bluetooth Button
- Volume +/-: Increase/Decrease volume
- Repeat/Setting Button
- Previous/Next Track, Fast Rewind/Forward
- Pause/Play/Auto Scan
- Stop/EQ
- FM/AM
- LED Ambient Light / BASS
3.2 Standby and Power Off Operations
- Power On: In standby mode, press and hold the ON/OFF/FUNC button for 2 seconds. The unit will power on and enter CD mode (default). The display will light up.
- Power Off: In powered-on mode, press and hold the ON/OFF/FUNC button for 2 seconds. The display will turn off.
- Resume Last Mode: After a factory reset, the default startup mode is CD. During normal use, powering on again will resume the last active mode before shutdown.
3.3 Mode Switching
In powered-on mode, briefly press the ON/OFF/FUNC button to cycle through playback modes: CD → USB → TF → AUX → TAPE. Pressing the FM/AM button in any mode switches to FM/AM mode, toggling between FM and AM.
3.4 CD Playback Function
- Press the ON/OFF/FUNC button to switch to "CD" mode.
- Press the CD Open/Close Door to open it. Place the disc with the printed side facing up, then close the door securely.
- After reading the disc, the screen will display "CD" and the total number of tracks, then automatically start playing from the first track.
- Press the PLAY/PAUSE/SCAN button to pause/resume playback.
- Press the STOP button to stop playback.
- Use LAST/NEXT buttons to navigate tracks. Hold for fast reverse/forward.
- Repeat and Random Play: Press the MODE button (part of the remote control, or refer to the main unit's repeat button) to cycle through repeat modes (Repeat Current Track, Repeat All Tracks, Random Play).
- Programmed Playback: In stop mode, press PROG./REPEAT. Select desired track numbers using LAST/NEXT and confirm with PROG./REPEAT. Max 20 tracks for CD, 99 for MP3 CD.
3.5 USB Playback Function
- Press the ON/OFF/FUNC button to switch to "USB" mode.
- Insert a USB drive containing MP3 files into the USB PORT.
- Playback starts automatically. Use PLAY/PAUSE/SCAN, LAST/NEXT, and STOP buttons for control.
- Programmed and Repeat Playback methods are the same as for CD.
3.6 TF Card Playback Function
- Press the ON/OFF/FUNC button to switch to "TF" mode.
- Insert a TF card containing MP3 files into the TF CARD SLOT.
- Playback starts automatically. Use PLAY/PAUSE/SCAN, LAST/NEXT, and STOP buttons for control.
- Programmed and Repeat Playback methods are the same as for CD.
3.7 AUX IN Function
- Press the ON/OFF/FUNC button to switch to "AUX" mode.
- Connect an external audio device (e.g., phone, MP3 player) to the AUX IN jack using an audio cable.
- Play music from the external device. Use PLAY/PAUSE/SCAN to mute/unmute the sound.

Image: AUX Interface.
3.8 FM/AM Radio Function
- FM Mode: Extend the telescopic antenna. Press the FM/AM button to switch to FM mode.
- Auto Search: Press and hold PLAY/PAUSE/SCAN for 2 seconds to search and store stations automatically (max 30 stations).
- Manual Search: Briefly press LAST/NEXT to adjust frequency by 0.1MHz. Hold for continuous search.
- Manual Store Station: When a desired station is found, press and hold PROG./REPEAT briefly. Use LAST/NEXT to select a storage location (P01-P30), then press PROG./REPEAT again to confirm.
- Recall Preset Station: Briefly press PLAY/PAUSE/SCAN to recall preset stations. Use LAST/NEXT to select other presets.
- AM Mode: In FM mode, briefly press the FM/AM button to switch to AM mode.
- AM Auto Search: Press and hold PLAY/PAUSE/SCAN for 2 seconds to search and store stations automatically (max 30 stations).
- AM Manual Search: Briefly press LAST/NEXT to adjust frequency by 9KHz. Hold for continuous search.
3.9 Bluetooth Function

Image: Two-Way Bluetooth Capability.
- Bluetooth Pairing (Receiver Mode): Press the BT button to switch to Bluetooth mode. The screen displays blinking "bt", indicating pairing mode. Search for "RETEKESS-TR642" on your external device. After successful pairing, "bt" becomes steadily lit.
- Bluetooth Transmission (Transmitter Mode): In any non-Bluetooth mode, briefly press BT LAUNCH (button on remote control). The unit will search and auto-connect to a nearby Bluetooth receiver. The audio from the TR642 will play through the receiver.
- Disconnect: Press and hold the BT button for 2 seconds to disconnect. The unit re-enters pairing mode.
- Auto Power Off: In pairing mode or with Bluetooth playback paused, if no device connects or operation occurs within 15 minutes, the unit will auto power off.
3.10 Cassette Tape Operation

Image: Cassette control buttons.
- Tape Playback: Press STOP/EJECT to open the cassette compartment. Insert a music tape and close the door. Press ON/OFF/FUNC to switch to "TAPE" mode. Use PLAY, PAUSE, STOP/EJECT, FAST FORWARD (F.FWD), and FAST REWIND (F.REW) buttons for control. Playback stops automatically at tape end.
- Tape Recording: Insert a recordable tape. Select desired audio source (CD, FM, AM, BT, AUX, USB, TF). Start playing the source, then simultaneously press RECORD (REC.) and PLAY. Press PAUSE to pause recording, STOP/EJECT to stop.
3.11 Volume Adjustment
- Use VOL- and VOL+ buttons to adjust volume. Hold for continuous adjustment.
- Default volume is 15 after factory reset. Subsequent startups resume the last used volume. Volume range: 00-30.
3.12 EQ Switching Function
- During operation, press and hold the STOP/EQ button for 2 seconds to enter EQ mode.
- Briefly press STOP/EQ to cycle through five EQ presets: FLAT → ROCK → POP → JAZZ → CLASS.
3.13 Headphone Output Function
- Insert a headphone plug into the 3.5mm HEADPHONE JACK. Sound will output through headphones, and internal speakers will be muted.

Image: 3.5mm Earphone Jack.
3.14 Ambient Light and BASS On/Off
- Ambient Light: Briefly press the LED LIGHT/BASS button to turn the multi-color fading ambient light on/off.
- BASS Boost: Press and hold the LED LIGHT/BASS button for 2 seconds to turn BASS enhancement on/off.

Image: LED Ambient Lighting.
3.15 Sleep Timer (Remote Control Function)

Image: Remote control functions.
- During operation, briefly press SLEEP to enter sleep timer mode. The sleep icon lights up.
- Use LAST (decrement) or NEXT (increment) to set the shutdown timer (minutes) from 10 to 120 minutes.
- The unit will automatically power off when the timer ends.
- To cancel, use LAST/NEXT to select "OFF".
4. Maintenance
- Regular Cleaning: Regularly wipe the radio's casing and other parts with a clean, soft cloth. Avoid water or chemical cleaners.
- Avoid Moisture: Store the radio in a dry environment. Avoid dampness and high temperatures.
- Prevent Long-Term Storage: To maintain battery health, use and charge the product at least once every six months.
- Proper Storage: Store the radio in a safe place to prevent drops or impacts. Avoid direct sunlight.
- Battery Replacement: Unscrew and open the battery compartment door on the bottom. Remove the old battery and disconnect its plug. Replace with a battery of the same model (7.4V/5000mAh) and reconnect the plug. Close and secure the battery door.
5. Troubleshooting
- No Signal Reception: Check antenna adjustment. Try moving the radio to different locations/orientations. Check for potential sources of interference.
- Distorted Sound: Reduce volume or adjust frequency.
- Unable to Power On: If the battery is depleted, charge for more than 15 minutes and try again.
- RESET Function: If the unit experiences display errors, unresponsive buttons, or malfunctions, press the RESET button on the back of the unit to restore normal operation.
- Factory Reset: In Radio mode (FM/AM), simultaneously press and hold the PROG./REPEAT button and the FM/AM button until the screen displays all segments/characters. After about 5 seconds, the display will clear, and the unit will power off automatically.
6. Specifications
Image: Detailed product specifications.
| Feature | Specification |
|---|---|
| Material | ABS+PC |
| Dimensions (WxHxD) | 200mm x 197mm x 134mm |
| Weight | 1.66KG (including lithium battery) |
| Type-C IN | 5V 2A IN |
| Built-in Lithium Battery | 7.4V/5000mAh (2 cells) |
| Interfaces | TF card/3.5mm/USB/AUX |
| USB Slot Playback Formats | MP3/WMA/WAV |
| USB Flash Drive/TF Card Slot Capacity | Maximum supported capacity: 64GB |
| Headphone Jack | 3.5mm |
| CD Player Battery Life | 7.5 hours |
| Remote Control Batteries | 2 AAA batteries (not included) |
| Output Power | 3W x 2 |
| Bluetooth Data | 2400~2483.5MHz, 10mW |
| FM Frequency Range | 76.0-108MHz |
| AM Frequency Range | 522-1710kHz |
| Speaker Impedance | 4Ω |
| Certification | CE, FCC |
7. User Tips
- Digitizing Cassettes: The TR642 has a notable feature: you can record content from cassettes directly onto a USB memory stick, allowing you to digitize your old tape collection.
- Sound Quality: While the sound is decent for its size and price, it may start to distort at very high volumes. Adjust the volume to a comfortable level for clear audio.
- Ease of Use: The operation can be somewhat complicated and not entirely intuitive for all users, especially those less familiar with modern electronics. Take time to familiarize yourself with the controls.
- Charging: The unit charges via a USB-C cable. Note that a power adapter (charger) is typically not included in the package.
- MP3 CD Playback: The CD player supports MP3 CDs, expanding your music options beyond standard audio CDs.
- Portability: Its compact size and integrated handle make it ideal for travel, outdoor use, or moving around the house.
8. Warranty and Support
Most new products carry a two-year manufacturer's warranty from the date of purchase. For warranty service, you will need to provide a receipt or proof of purchase from the seller.
Exclusions from Warranty Coverage:
- Damage caused by accident.
- Misuse or abuse of the product.
- Unauthorized alterations or repairs.
- If the serial number has been altered, defaced, or removed.
For assistance regarding repairs and service, or for a list of RETEKESS-approved accessories, please contact RETEKESS support or visit their official website.
User Manual PDF: A detailed user manual in multiple languages (including English, French, German, Italian, Spanish, Russian, Japanese) is available. You can view or download it from the following link: RETEKESS TR642 User Manual (PDF)
