1. Safety Information
Please read this manual carefully before installation and use. Keep it for future reference.
- To prevent damage, falling, electric shock, or fire, strictly follow these instructions for installation and use. Do not modify the lamp or replace parts without authorization.
- Do not use with power supplies outside the working voltage range (198-242V~, i.e., ±10% of rated voltage). Prolonged use outside this range may damage the lamp.
- Do not install the lamp on inclined or unstable ceilings. This lamp is designed for ceiling installation only.
- Do not install the lamp above high-temperature objects or in damp locations (e.g., above stoves, gas pipes, or exhaust vents) to prevent damage.
- Do not use in series with dimmer switches. Using with dimmer switches may cause malfunctions.
- Inspection and maintenance of the lamp should be performed by qualified electrical professionals. Non-professionals risk danger.
- If the lamp exhibits abnormal phenomena, immediately cut off the power and contact the sales store. Provide the corresponding model number for repairs.
- The light source in this lamp should only be replaced by the manufacturer, its service agent, or similarly qualified persons.
2. Setup and Installation
Warning: Before installation, always cut off the power supply to prevent electric shock.
- Prepare the Ceiling: Use the base plate to mark the desired drilling positions on the ceiling. Drill holes accurately and insert expansion anchors.
- Mount the Base Plate: Pass the power cord through the designated hole in the base plate. Secure the base plate to the ceiling using self-tapping screws.
- Connect Wiring: Connect the power cord to the terminal block according to the wiring marks. Ensure all connections are secure.
- Install Acrylic Cover: Carefully place the acrylic cover into the lamp frame. Adjust the edges of the cover to ensure it sits flush and evenly within the frame.
3. Operating Instructions
3.1. Basic Operation (via Wall Switch)
This lamp series features adjustable color temperature, which can be cycled through by repeatedly turning the wall switch ON/OFF:
- Mixed Light: Turn the lamp ON after it has been OFF for more than 15 seconds.
- White Light: After mixed light, turn the lamp OFF for 1-3 seconds, then turn it ON.
- Warm Light: After white light, turn the lamp OFF for 1-3 seconds, then turn it ON.
Note: The interval between turning OFF and ON must be 1-3 seconds to ensure color temperature switching. If the OFF duration exceeds 15 seconds, the lamp will revert to mixed light when turned ON again.
3.2. Remote Control Operation
The remote control allows for more precise control over brightness and color temperature.
Remote Control Button Functions:
- Total ON/OFF: Turns all paired lamps ON or OFF.
- 1-6 Group ON/OFF: Individual ON/OFF control for up to 6 groups of lamps.
- Brightness + / -: Short press to adjust brightness in steps; long press (1 second) for continuous adjustment.
- Color Temperature + / -: Short press to adjust color temperature in steps (cooler/warmer); long press (1 second) for continuous adjustment.
- One-key Night Light: Activates a low-brightness night light mode for the currently controlled lamp.
- Scene Switching: Cycles through pre-set lighting scenes.
Pairing (Code Matching) & Decoding:
- Pairing: After powering on the lamp, within 3 seconds, press and hold the 'ON' button for any desired group (1-6) on the remote control for 2 seconds. The lamp will flash once, indicating successful pairing. (If the lamp is already ON, first power it OFF and wait 10 seconds before attempting pairing).
- Decoding (Unpairing): After powering on the lamp, within 3 seconds, press and hold the 'OFF' button for the paired group on the remote control for 2 seconds. The lamp will flash three times, indicating successful unpairing. (If the lamp is already ON, first power it OFF and wait 10 seconds before attempting unpairing).
Video: Demonstration of color temperature and brightness adjustment using the remote control.
4. Maintenance
4.1. Cleaning and Care
- Before cleaning or performing any maintenance, always cut off the power supply and allow the lamp to cool down for at least 10 minutes to prevent electric shock or burns.
- Use a soft, dry cloth to wipe the lamp. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by drying with a clean cloth.
- Do not use organic solvents (such as gasoline, paint thinner, alcohol, or abrasive cleaners) to clean the lamp, as this may damage the finish or acrylic cover.
5. Troubleshooting
- Lamp does not turn on:
- Check if the power supply is connected correctly and securely.
- Ensure the wall switch is in the ON position.
- If using the remote control, ensure it has working batteries and is properly paired with the lamp.
- If the light source has reached its end of life, it may need replacement by a qualified technician.
- Abnormal operation (flickering, dimming issues):
- Immediately cut off the power supply.
- Contact customer support or the sales store for assistance. Do not attempt to repair it yourself.
6. Specifications
General
- Product Type: LED Ceiling Chandelier
- Style: Modern
- Body Material: Wood, Metal
- Light Source: LED bulbs (integrated)
- Installation: Surface mounted
- Application: Living Room, Dining Room, Bedroom, Balcony, Kitchen, Foyer, Study, Bathroom, Exhibition Hall, Corridor
- Smart Device: No (features integrated remote control)
- Dimmable: Yes, via included remote control (brightness and color temperature adjustable)
- Power Source: AC
- Voltage: 90 - 260 V
- Rated Frequency: 50/60 Hz
- Certification: CCC, CE
Model-Specific Details
| Model | Rated Power | Dimensions (L*W*H) | Lighting Area |
|---|---|---|---|
| MXD112-M/K-F64 | 112W | 920*620*95mm | Approx. 10-15 m² |
| MXD56-MMK-F64 | 56W | 620*400*95mm | Approx. 5-10 m² |
| D40cm Variant | 24W | D40*H14cm | 5-8 m² |
Note: Dimensions and power may vary slightly by specific product variant. Refer to actual product for precise details.

Image: D40cm Variant Specifications (D40*H14cm, 24W, 5-8M²)

Image: Acrylic cover detail, showing good light transmission.
7. Warranty and Support
This product is manufactured by Midea (美的照明).
- Light Source Warranty: 2 years from the date of purchase.
- Electronic Components Warranty: 2 years from the date of purchase.
- Plastic Parts: Not covered under warranty.
- General Warranty: Within one year from the date of purchase, if any damage occurs due to manufacturing process or component defects, Midea sales outlets will provide free repair services upon presentation of proof of purchase. This may include replacing parts or the entire product (excluding the light source), depending on the situation.
Warranty Exclusions:
The following conditions are not covered by free warranty services:
- Damage caused by improper use, such as connecting to incorrect power supplies, using unsuitable accessories, improper installation, failure to follow instructions, or negligence.
- Damage caused by transportation or other accidents.
- Repairs or modifications performed by unauthorized personnel.
- Damage caused by force majeure (e.g., natural disasters, abnormal voltage).
- Damage caused by use outside of normal household environments (e.g., industrial or commercial use).
- Normal aging, wear, and tear of the product that does not affect its normal function.
For support, please contact the national service hotline: 4008899315 or visit the official website: www.midea.com.
A detailed PDF user manual is available for download. Please refer to the seller's product page for the direct link.
8. User Tips
- Regularly dust the lamp with a soft, dry cloth to maintain its appearance and light output.
- When adjusting color temperature or brightness, make small adjustments to find your preferred setting for comfort and ambiance.
- Ensure the remote control batteries are replaced periodically to ensure reliable operation.