1. Product Overview
The 6.25-inch motorcycle Carplay dash cam features two waterproof cameras for front and rear video recording. With Carplay or Android Auto wireless connection, riders can connect their phones to access APP services such as GPS navigation, music playback, Bluetooth calls, and voice assistance. The product's casing is IP67 waterproof, dustproof, shockproof, durable, and rustproof, ensuring normal operation in harsh outdoor environments and rainy conditions.

Figure 1: Device overview with numbered components and remote control.
Device Components and Functions
| Number | Function Description |
|---|---|
| 1 | Light Sensor |
| 2 | Microphone receiving hole |
| 3 | TF Card slot hole |
Button Function Definitions (Remote Control)
| Number | Description | During Operation | Incoming Call |
|---|---|---|---|
| 4 | Cycle Button | Short press to enter the rear view interface/return to the previous interface. Long press for 10 seconds to power off. | Short press to answer the phone (only in Carplay mode). |
| 5 | Camera Button | Short press for one-click capture. Long press for 3 seconds to lock the video. | Short press to hang up the phone (CP mode only). |
| 6 | Main Interface Button | Short press to enter the main interface/mobile phone interconnection interface. Long press for 5 seconds to close/open touch function. | NA |
2. Product Component List
Accessories List
| Name | Description | Quantity |
|---|---|---|
| Main Unit | 6.25-inch HD Display (1560 * 720) / 2-channel camera interface / Touch control / Bluetooth / WIFI / Audio output / FHD High-definition video | 1 |
| Power Cable | 6V-30V / 2.5A current / ACC power | 1 |
| Camera | AHD High Definition (1080P) / 4PIN BM connector | 2 |
| Cable Clicker Control | Supports functions such as one-key photo capture, page switching, answering and ending calls, etc. | 1 |
| Allen Key | Used to fasten the screws of the cable clicker control and bracket base | 1 |
| Motorcycle Dash Cam Bracket | Used to fix the machine with the bracket on the motorcycle dash cam | 1 |
| Cross Screwdriver | Used to fasten the screws of the TF card slot cover | 1 |
| Allen Key 1 | Used to fasten the screws of the upper and lower covers of the bracket and the screws of the bracket base link | 1 |
| Allen Key 2 | Used to fasten the front and rear camera | 1 |
3. Product Specifications
| Item | Specification |
|---|---|
| Model | F83 DVR 6.25-inch |
| Main Control | High-performance SoC |
| Wireless Features | Apple Carplay, Android Auto, Wifi Video |
| Screen | 6.25-inch, 1560*720 resolution |
| Storage | MEMORY Card, 32GB to 256GB, Class 10 |
| Wireless Module | Wifi, Bluetooth |
| Camera | Dual-channel front and rear cameras |
| Microphone | Built-in |
| Digital Line Control | Button shortcut control |
| Operating Voltage | Input: 6V-30V |
| Power Consumption | Not exceeding 10W |
| Dimensions | 164*83*35MM |
| Weight | Approximately 338g |
| Material | ABS/PC |
| Operating Language | Simplified Chinese / Traditional Chinese / English / Russian / Spanish / French / German / Japanese / Korean / Italian / Portuguese |
| Operating Interface | Graphical menu operation |
| Operation Method | Touch |
| Video Input | 2-channel HD video input |
| Recording Mode | Default power-on recording, no missing seconds |
| Recording Format | 1080P H.264 video, saved separately for 2 channels |
| Real-time Display | 6.25-inch HD IPS screen, 1560*720 |
| Local Playback | Playback locally, view anytime |
| Screen Protection | Can be set to 1 minute / 3 minutes / 5 minutes |
| Smart Connectivity | WIFI, Supports Apple Carplay, Android Auto, and Wifi Video |
| Operating Temperature | -20℃ to 70℃ |
4. Memory Card Information
4.1. Memory Card Specifications Requirement
The quality of the memory card significantly impacts the stability of video recording. To ensure reliable video recording, please use memory cards from reputable brands such as SanDisk, Kingston, Toshiba, and Samsung. The speed certification should be at least Class 10, and it must support up to 256GB.
4.2. Memory Card Installation Instructions
To install the memory card:
- First, remove the TF card cover.
- Insert the card into the device.
- Reinstall the TF card cover.
- Secure the cover by locking the two screws.
Note: Pay attention to the correct direction of the card cover during installation.

Figure 2: Step-by-step memory card installation.
5. Installation Instructions
5.1. Mounting Bracket Installation
Details of Bracket Accessories
| Component | Description |
|---|---|
| Clamp Bottom Cover | Used for securing the bracket. |
| 25.4# TPU Pad | Rubber pad for 25.4mm diameter. |
| Bracket Base Connecting Rod | Connects bracket components. |
| 22# TPU Pad | Rubber pad for 22mm diameter. |
| Screw 1 | Fastening screw. |
| 28# TPU Pad | Rubber pad for 28mm diameter. |
Bracket Installation Steps
- Install the TPU pads in size order on the corresponding slots of the bracket bottom cover and bracket connecting rod.
- First, install the bracket bottom cover on the handlebar.
- Install the bracket connecting rod and bracket bottom cover together.
- Use screw 2 to secure them.
- Secure the bracket assembly and the main unit with screw 2.

Figure 3: Bracket installation on handlebar.
5.2. Cable Clicker Installation Instructions
Install the cable clicker control on the left handlebar of the motorcycle, and then secure it with screws.

Figure 4: Cable clicker control installation.
5.3. Connection Instructions
Power Cable Connection Instructions
Connect the power cable as follows: red wire (ACC), yellow wire (B+), black wire (ground), to the corresponding wiring positions on the motorcycle.

Figure 5: Power cable and camera wiring diagram.
Note: Make sure to confirm the corresponding ACC/B+/ground interfaces on the motorcycle, connect them one-to-one, and tighten. Please use the original power cable.
BM Connector Wiring Instructions
- Connect the front and rear cameras to the corresponding BM connector on the main unit and tighten them (note that the wires are marked with Front/Rear CH1/2).
- Connect the cable clicker control to the corresponding BM connector on the main unit and tighten it (note that the wire is marked with Controller).
- Connect the power cable to the corresponding BM connector on the main unit and tighten it (note that the wire is marked with Power).

Figure 6: BM connector wiring details.
5.4. Front and Rear Camera Installation Instructions
Install the front and rear cameras separately at the front and rear of the motorcycle, and secure them in place.

Figure 7: Front and rear camera placement.
5.5. Overall Installation Schematic

Figure 8: Complete system installation overview.
6. Operation
6.1. Interface Explanation

Figure 9: Main interface with numbered icons.
- Home Button: Click to return to the home page.
- Brightness Key: Click to adjust the screen brightness.
- Audio Output Shortcut Key: One-click to enter the demonstration screen for connecting Bluetooth headphones to the phone.
- Camera Shortcut Button: Click to view the recording interface.
- Switch Button: Click to switch between the front camera screen, rear camera screen, and motorcycle preview.
- Record Button: Click to start recording video, click again to stop recording.
- Photo Button: Click to take a photo with one click.
- Lock Button: Locks the currently recording video to prevent loss.
- Apple Carplay: Connects to Apple devices.
- Android Auto: Connects to Android devices.
- WiFi Video: Click to enter connection mode, watch and record videos on your phone.
- Audio Output: After Carplay/Auto phone projection, the phone's Bluetooth can connect to Bluetooth headphones for music playback or answering calls.
- Video Playback: Click to view videos on the video screen.
- Settings: Click to access the settings menu.
6.2. Automatic Brightness Adjustment
The built-in light sensor located at the bottom right of the device automatically detects the brightness of the surrounding environment and adjusts the screen brightness to improve comfort. In automatic brightness mode, brightness cannot be manually adjusted.
Click the "AUTO" button on the sidebar, then click "AUTO" to disable automatic brightness adjustment. Lightly press "AUTO" to switch to automatic brightness mode.
6.3. Explanation of Status Bar Icons
| Icon | Description | Icon | Description |
|---|---|---|---|
| Recording in progress | Motorcycle battery voltage | ||
| Bluetooth function enabled | MEMORY card inserted | ||
| Bluetooth connected | MEMORY card not inserted | ||
| WiFi enabled on the device |
6.4. Rain Mode (Screen Lock)
To prevent accidental touches from raindrops on rainy days, you can long-press the third button on the cable clicker control for 5 seconds to activate Rain Mode. Once activated, touchscreen functionality will be disabled. To unlock, long-press the third button on the cable clicker control for 5 seconds again.
6.5. Apple CarPlay Connection
Click the [Apple CarPlay] button, then select the [Apple CarPlay] option. First, turn on Wi-Fi and Bluetooth on your iPhone. The device's Bluetooth will automatically turn on, named as MT02-XXX. Once Bluetooth connection is successful, Apple CarPlay can be connected. When the device is powered on, it will attempt to automatically connect to the last connected phone.

Figure 10: Apple CarPlay connection interface.
Click the "Details" button for detailed connection steps and common connection issues. When the auxiliary touch is disabled, you can click the [Smart Screen] button to return to the homepage. The Apple CarPlay option only supports Apple phones. Please first turn off the Bluetooth button, then turn off the WiFi button in the phone settings to disconnect.
6.6. Android Auto Connection
Click the [Android Auto] button, then select the [Android Auto] option. First, turn on Wi-Fi and Bluetooth on your Android smartphone. The device's Bluetooth will automatically turn on, and the name will be MT02-XXX. Once Bluetooth is successfully connected, you can connect to the Android Auto system. When the device is powered on, it will attempt to automatically connect to the last connected phone.

Figure 11: Android Auto connection interface.
Click the "Details" button for detailed connection steps and common connection issues. The wireless Android Auto option only supports Android phones. Please forget the Bluetooth in the phone settings, and turn off the WiFi button to disconnect.
6.7. WiFi Video Connection
First, scan the QR code to download the corresponding application. Once the download is complete, open the application and follow the prompts to connect to the device's WiFi. WiFi Name: RTSP-XXXXX, password as shown on the device. After connecting, the device will enter the recording screen and no operations can be performed. You can watch or download recorded videos, adjust device parameters, etc., on your phone.

Figure 12: WiFi Video connection interface with QR code.
Click the "Details" button for detailed connection steps and common connection issues. Closing the WiFi button on the phone disconnects the connection. It takes one minute after disconnecting to operate on the device.
6.8. Dash Cam Operation
The camera images will not be displayed on the main page. To view the camera images, click the "
" button. When a card is inserted, the system automatically enters recording mode. When recording, the red dot in the "
" button will blink.
| Icon | Function |
|---|---|
| Click to start recording, click again to stop recording | |
| Click to lock the current video with one touch | |
| Click to take a snapshot with one touch | |
| Click to return to the main interface | |
| Click to quickly return to the mobile connectivity interface | |
| Click to toggle the recording sound on or off |
6.9. Audio Output
After connecting to Apple CarPlay or Android Auto for screen mirroring, you can use your phone's Bluetooth to connect to the motorcycle's Bluetooth headphones. Once connected successfully, all sounds produced by the device will be transmitted to the motorcycle's Bluetooth headphones for playback.
If there are any sound abnormalities, please disconnect the phone from the headphones.
6.10. Video Playback
Click the [Video Playback] button to enter the video playback interface. You can select [Video], [Photo], or [Locked Video] folders, then click the select button next to the file to delete, lock, or unlock the video.
Click "
" to play or pause the video. Click "
" to switch to the next video or photo. Click "
" the fullscreen button to play the video in fullscreen. Click "
" to return to the previous screen.