PowMr POW-SunSmart SP5.2K

Contents

PowMr 5.2KW Single-Phase Hybrid Solar Inverter User Manual

Model: POW-SunSmart SP5.2K

1. Introduction

The PowMr POW-SunSmart SP5.2K is a 5.2KW single-phase hybrid solar inverter designed for 48V battery systems, providing 110V/120V AC output. It features a 100A MPPT solar charger, making it suitable for various battery types, including LiFePO4, and supports battery-less operation. This inverter offers flexible power solutions for both off-grid and on-grid applications, with advanced features like parallel operation, multiple charging modes, and comprehensive protection.

PowMr 5.2KW Hybrid Solar Inverter front view with display
Figure 1: PowMr 5.2KW Hybrid Solar Inverter (Front View)
PowMr 5.2KW Hybrid Solar Inverter angled view showing various ports and cooling fans
Figure 2: PowMr 5.2KW Hybrid Solar Inverter (Angled View with Ports)

2. Key Features

  • Pure Sine Wave Output: Ensures compatibility with sensitive electronics.
  • Parallel Operation: Supports parallel connection of up to 6 inverters for increased capacity in single-phase, split-phase, or three-phase configurations.
  • Battery-less Mode: Can power loads directly from PV array or AC grid without a battery.
  • Multiple Charging Modes: Offers Only Solar, Mains Priority, Solar Priority, and Mains & Solar hybrid charging.
  • Advanced MPPT Technology: High efficiency of 99.9% for optimal solar energy harvesting.
  • Dynamic Display Screen: LCD screen and 3 LED indicators for real-time system data and operating status.
  • Time Slot Control: Allows setting priority for mains and battery usage based on time slots, useful for managing local peak and valley tariffs.
  • Power Saving Mode: Reduces no-load loss.
  • Intelligent Cooling: Variable speed fans for efficient heat dissipation and extended system life.
  • Battery Compatibility: Supports both lead-acid and lithium batteries, with activation by PV solar or mains for dormant Li-ion batteries.
  • Comprehensive Protection: 360° all-around protection including short circuit, over/under voltage, overload, and reverse protection.
Diagram summarizing key features of the PowMr Split Phase Hybrid Inverter
Figure 3: Key Features Overview

3. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your PowMr hybrid solar inverter. Ensure all connections are secure and follow local electrical codes.

3.1 Basic Wiring Considerations

  • Ensure the inverter is installed in a well-ventilated area, away from direct sunlight and moisture.
  • Verify that the battery voltage matches the inverter's rated input voltage (48V).
  • Connect the PV array, battery bank, utility grid, and loads according to the diagrams provided.
  • Always disconnect all power sources (PV, battery, utility) before making or changing any wiring connections.

3.2 Parallel Connection (Optional)

The inverter supports parallel operation of up to 6 units to achieve higher output power. This can be configured for single-phase, three-phase, or split-phase systems.

Wiring diagram for parallel connection of multiple inverters in single-phase, three-phase, and split-phase configurations
Figure 4: Parallel Connection Diagrams (2 inverters single phase, 3 inverters three phase, 6 inverters split phase)

For split-phase configurations with multiple inverters, refer to the detailed wiring diagram below:

Detailed wiring diagram for 6 inverters connected in a split-phase system
Figure 5: Split-Phase Wiring for 6 Inverters

3.3 Battery Activation

The inverter can activate dormant lithium-ion batteries using either PV solar input or mains power. It is compatible with both lead-acid and lithium battery types.

Diagram showing activation of lithium batteries and compatibility with various battery types (FLD, SLD, AGM, GEL, LI)
Figure 6: Battery Activation and Compatibility

4. Operating Modes

The PowMr inverter offers flexible operating modes to suit various energy management needs.

4.1 Load Output Modes

The inverter supports four distinct load output modes:

  1. Solar First: PV and battery power the load. Switches to mains power only if PV fails.
  2. Inverter First: Switches to inverter power supply only when mains power has failed.
  3. Mains First: Prioritizes mains power.
  4. Hybrid Output: In utility bypass state (no battery or full battery), load power is supplied by PV and utility. Surplus PV energy can be fed back to the grid if grid connection is enabled.
Diagram illustrating the four load output modes: Solar First, Inverter First, Mains First, and Hybrid Output
Figure 7: Four Load Output Modes

4.2 Charging Modes

The inverter provides four charging modes:

  • Only Solar: Charges batteries exclusively from solar panels.
  • Mains Priority: Prioritizes charging from the utility grid.
  • Solar Priority: Prioritizes charging from solar panels.
  • Mains & Solar Hybrid Charging: Utilizes both mains and solar for charging.

4.3 Time Slot Control

Utilize the time slot control feature to optimize energy usage based on local electricity tariffs. You can program the inverter to prioritize mains or battery usage during specific times, such as using battery power during peak tariff hours and charging from solar or off-peak mains during other times.

4.4 Power Saving Mode

Activate the power saving mode to reduce the inverter's no-load power consumption, enhancing overall system efficiency when loads are minimal.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter.

  • Cleaning: Keep the inverter's exterior clean and free from dust. The unit features a dust-proof cover to minimize internal dust accumulation.
  • Ventilation: Ensure that the intelligent variable speed cooling fans and ventilation openings are not obstructed. Good airflow is essential for efficient heat dissipation.
  • Connections: Periodically check all electrical connections (PV, battery, AC input/output) for tightness and signs of corrosion.
  • Environment: Maintain the operating environment within the specified temperature and humidity ranges.
Diagram highlighting the smart design features including a dust-proof cover and dual cooling fans
Figure 8: Smart Design with Dust-proof Cover and Dual Cooling Fans

6. Troubleshooting

The PowMr inverter is equipped with comprehensive protection features and a dynamic display to help diagnose issues. Refer to the LCD screen and LED indicators for error codes or status messages.

6.1 Common Issues and Solutions

ProblemPossible CauseSolution
Inverter not turning onNo battery connection, low battery voltage, no PV input, AC input not connected.Check battery connections and voltage. Ensure PV and AC inputs are connected and active.
No AC outputOverload, short circuit, battery low, inverter fault.Reduce load. Check for short circuits. Charge battery. Check display for error codes.
PV charging not workingPV array disconnected, insufficient sunlight, PV voltage out of range.Check PV connections. Ensure adequate sunlight. Verify PV operating voltage (120-500Vdc).
Overload protection triggeredConnected loads exceed inverter's rated output power (5200W).Disconnect some loads. Check total power consumption of connected devices.
Overcharge protection triggeredBattery voltage exceeds safe limit.The inverter will alarm and stop charging automatically after 1 minute. Check battery settings.

6.2 Protection Features

The inverter incorporates multiple protection mechanisms:

  • Reverse Protection
  • Overload Protection
  • Short Circuit Protection
  • Over Voltage Protection
  • Under Voltage Protection
Diagram illustrating the 5 all-around protection features: Reverse, Overload, Short Circuit, Over Voltage, Under Voltage
Figure 9: All-around Protection Features

7. Specifications

Detailed technical specifications for the PowMr POW-SunSmart SP5.2K hybrid solar inverter.

Detailed product specification table for PowMr POW-SunSmart SP5.2K inverter
Figure 10: Product Specification Table
CategoryParameterValue
AC ModeRated input voltage110/120Vac
Frequency50Hz/60Hz (Auto detection)
Overload/short circuit protectionCircuit breaker
Efficiency>95%
AC reverse protectionAvailable
Inverter ModeOutput voltage waveformPure sine wave
Rated output power5200VA/5200W
Power factor1
Rated output voltage120Vac (100/105/110Vac Settable)
Maximum Efficiency>92%
Peak power10400VA
Loaded motor capability4HP
Rated battery input voltage48V (Minimum starting voltage 44V)
AC Output (Grid)Rated Output Power5200W
Max. apparent power5200VA
Max. output current41.7A
AC ChargingBattery typeLead acid or lithium battery
Maximum charge current (can be set)0-40A
Charge voltage range40–58Vdc
Overcharge protectionAlarm and turn off charging after 1 minute
PV ChargingMaximum PV open circuit voltage500Vdc
PV operating voltage range120-500Vdc
MPPT voltage range120-450Vdc
Maximum PV input power6000W
Maximum PV input current22A
PV charging current range (can be set)100A
Hybrid ChargingMax charger current (AC charger + PV charger)100A
Certified & EnvironmentalCertificationCE(IEC62109-1)
EMC certification levelEN61000
Operating temperature range-10°C ~ 55°C
Storage temperature range-25°C ~ 60°C
Noise≤60dB
Heat dissipationForced air cooling, variable speed of fan
Communication interfaceUSB/RS485(WiFi/GPRS)/Dry contact control

8. User Tips

  • Optimize Charging: Utilize the time slot control feature to charge your batteries during off-peak hours or when solar production is highest, maximizing cost savings and energy independence.
  • Monitor Performance: Regularly check the LCD display and LED indicators for system status and any alerts. The communication interfaces (USB/RS485/WiFi/GPRS) can be used for remote monitoring and data logging.
  • Parallel Expansion: If your power needs grow, remember that this inverter supports parallel operation up to 6 units, offering a scalable solution for increased capacity.
  • Battery-less Operation: For scenarios where battery storage is not desired or temporarily unavailable, the inverter can operate directly from PV and/or the grid, providing flexibility.

9. Warranty and Support

9.1 Warranty Information

This PowMr hybrid solar inverter comes with an 18-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and malfunctions under normal operating conditions.

9.2 Technical Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact PowMr customer support. Ensure you have your product model number (POW-SunSmart SP5.2K) and serial number ready when contacting support.

The inverter features communication interfaces (USB, RS485, WiFi/GPRS) which can be used for advanced monitoring and remote diagnostics, potentially aiding in support processes.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.