1. Introduction
The DaranEner NEOZ Portable Power Station is a high-capacity and high-power device designed to provide reliable power for various applications, including outdoor activities, emergencies, and general home use. Featuring a durable LiFePO4 battery and multiple output ports, it offers versatile charging solutions for your electronic devices and small appliances.
Package Contents
- 1 x Portable Power Station
- 1 x AC Charging Cable
- 1 x Car Charging Cable
- 1 x User Manual

2. Product Overview
2.1 Device Layout and Ports

- DC 5521 Solar Input: 10-30V DC 90W
- DC 5521 Output: 12V 3A
- USB-A QC3.0: 18W (5V-3A, 9V-2A, 12V-1.5A) x 2 ports
- USB-C PD: 60W (5V-3A, 9V-3A, 12V-3A, 20V-3A)
- AC Output: 300W (surge 600W) pure sine wave
2.2 Display Indicators

- Battery Level Indicator: Shows current battery charge percentage. Automatically lights off in 15 seconds after shutdown.
- Input Indicator: Displays incoming power.
- Output Indicator: Displays outgoing power (W).
- AC Indicator: Illuminates when AC output is active.
- DC Indicator: Illuminates when DC output is active.
- USB Indicator: Illuminates when USB output is active.
- PD Indicator: Illuminates when Power Delivery (USB-C) output is active.
- Time Unit Indicator: Shows remaining charge/discharge time in minutes or hours.
- Alarm Indicator: Alerts to errors or warnings.
- LED Light Indicator: Shows status of the built-in LED light.
3. Safety Instructions
WARNING: Risk of fire and burns. Do not open, crush, heat above 45°C, or incinerate. Follow the manufacturer's instructions.
- Do not expose the power station to rain or moisture.
- Do not use the power station near flammable gases or liquids.
- Keep out of reach of children.
- Do not disassemble or attempt to repair the unit yourself. Contact customer support for assistance.
- Ensure proper ventilation when using and charging the device.
- Avoid dropping or subjecting the device to strong impacts.
- Store the device in a cool, dry place away from direct sunlight.
3.1 Built-in Safety Features

- Anti-Reverse Polarity Protection
- Electromagnetic Field Protection
- Over-Power Protection
- Over-Discharge Protection
- Multi-Point Temperature Detection
- High-Temperature Protection
- Low-Temperature Protection
- Over-Current Protection
- Short-Circuit Protection
- Over-Voltage Protection
- Under-Voltage Protection
- Recovery Protection
- Overcharge Protection
- V0 Grade Fireproof Material
- Intelligent Fast Charging Strategy
4. Setup
4.1 Initial Charge
Before first use, fully charge the DaranEner NEOZ Portable Power Station. This ensures optimal battery performance and longevity.
- Connect the provided AC Charging Cable to the AC input port on the power station.
- Plug the other end of the AC Charging Cable into a standard wall outlet (100-120V 60Hz for US plug, 220V 50/60Hz for EU plug, 90-110V 50/60Hz for JP plug, depending on your model).
- The display will show the charging status. The unit charges to full in approximately 1.5 to 1.8 hours using AC fast charging.

4.2 Solar Charging (Optional)
The NEOZ supports solar charging with a built-in 90W MPPT controller.
- Connect a compatible solar panel (not included) to the DC5521 solar input port (10-30V DC 90W).
- Position the solar panel in direct sunlight for maximum efficiency.
- The display will indicate solar input and charging progress. Full solar charge takes approximately 2 hours with a 90W solar panel.

4.3 Car Charging
Charge your power station on the go using your vehicle's 12V car outlet.
- Connect the provided Car Charging Cable to the DC5521 input port on the power station.
- Plug the other end of the Car Charging Cable into your vehicle's 12V cigarette lighter socket.
- The display will show the charging status. A full charge from a car outlet takes approximately 2 hours.

5. Operating Instructions
5.1 Turning On/Off
- To turn on the power station, press and hold the main power button until the display illuminates.
- To turn off the power station, press and hold the main power button until the display turns off.
5.2 Using AC Output
- Ensure the power station is turned on.
- Press the "AC ON/OFF" button to activate the AC output. The AC indicator on the display will light up.
- Plug your device into the AC outlet.
- After use, press the "AC ON/OFF" button again to turn off the AC output and conserve battery.
5.3 Using DC Output (DC5521)
- Ensure the power station is turned on.
- Press the "DC ON/OFF" button to activate the DC output. The DC indicator on the display will light up.
- Connect your 12V device to the DC5521 output port.
- After use, press the "DC ON/OFF" button again to turn off the DC output.
5.4 Using USB Outputs (USB-A QC3.0 & USB-C PD)
- Ensure the power station is turned on.
- Plug your USB device into the appropriate USB-A or USB-C port.
- The USB or PD indicator on the display will light up automatically.
- USB outputs are typically always active when the unit is on, but it's good practice to disconnect devices when not in use.
5.5 LED Light Operation
The DaranEner NEOZ features a built-in LED light with four modes: high brightness, low brightness, SOS, and strobe.
- To turn on the LED light, press the dedicated light button.
- Press the button repeatedly to cycle through the modes: High Brightness → Low Brightness → SOS → Strobe.
- To turn off the LED light, press the button until the light turns off, or press and hold the button.

5.6 Estimated Device Run Times


6. Maintenance
6.1 Storage
- Store the power station in a cool, dry place, away from direct sunlight and extreme temperatures.
- For long-term storage, it is recommended to charge the unit once a month to maintain battery health.
- Ensure the unit is turned off before storing.
6.2 Cleaning
- Use a soft, dry cloth to clean the exterior of the power station.
- Do not use abrasive cleaners or solvents.
- Keep ports free of dust and debris.
6.3 Battery Longevity
The DaranEner NEOZ uses a LiFePO4 battery with an estimated cycle life of about 3500 times, ensuring long-term reliability. Proper storage and regular charging contribute to maximizing battery lifespan.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power station does not turn on. | Battery is depleted. | Charge the power station using the AC adapter, solar panel, or car charger. |
| AC output not working. | AC output not activated; device exceeds 300W. | Press the "AC ON/OFF" button. Ensure connected device's power consumption is within 300W. |
| Device not charging via USB. | Power station is off; USB port is faulty; device is incompatible. | Ensure power station is on. Try a different USB port or cable. Check device compatibility. |
| Solar charging is slow or not working. | Insufficient sunlight; incompatible solar panel; dirty solar panel. | Ensure direct sunlight. Use a compatible 10-30V DC 90W solar panel. Clean the solar panel surface. |
| Alarm indicator is on. | Overload, over-temperature, or other internal error. | Disconnect all devices, turn off the power station, and restart. If the issue persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | DaranEner |
| Model | NEOZ |
| Battery Type | LiFePO4 |
| Battery Capacity | 179.2Wh / 22.4V / 8Ah |
| AC Output | 300W (Surge 600W) Pure Sine Wave |
| DC5521 Solar Input | 10-30V DC 90W |
| DC5521 Output | 12V 3A |
| USB-C PD Output | 60W (5V-3A, 9V-3A, 12V-3A, 20V-3A) |
| USB-A QC3.0 Output | 18W (5V-3A, 9V-2A, 12V-1.5A) x 2 |
| Light Mode | 4 modes (High, Low, SOS, Strobe) |
| Noise Level | 46dB |
| Product Material | ABS |
| Dimensions (L x W x H) | 308 x 247 x 196mm / 12.13 x 9.72 x 7.72in |
| Weight | 2.75kg / 6.06lb |
| Battery Cycle Life | Approx. 3500 times |
| Discharge Temperature | -10 to 45°C / 14 to 113°F |
| Charge Temperature | 0 to 45°C / 32 to 113°F |
| Plug Type (Optional) | 100-120V 60Hz US plug, 220V 50/60Hz EU plug, 90-110V 50/60Hz JP plug |


9. User Tips
- For optimal performance, keep the power station charged, especially before extended periods of non-use.
- When using the LED light, cycle through modes to find the most suitable brightness or emergency signal.
- Consider the power consumption of your devices to estimate realistic run times and avoid overloading the unit.
10. Warranty and Support
The DaranEner NEOZ Portable Power Station comes with a 5-year after-sales service commitment.
For technical support, warranty claims, or any questions regarding your product, please contact DaranEner customer service through the retailer where you purchased the product or visit the official DaranEner website for contact information.