OffiGo 120cm U Shaped Height Adjustable Desk

Contents

OffiGo U Shaped Electric Standing Desk with Monitor Stand

User Manual

Model: JSD5-G

1. General Guidelines

Before starting to use your OffiGo Standing Desk, please read this manual thoroughly to understand all its functions and settings. Keep this manual in a safe place for future reference after installation.

2. Precautions

  • This desk has a maximum load capacity of 70kg (154lb), including the desktop. Do not place items exceeding this weight on the desk.
  • Ensure the desk is placed on a level surface to prevent instability.
  • Keep children and pets away from the moving parts of the desk during height adjustments.
  • Ensure there are no obstacles above or below the desk that could interfere with its movement.

3. Setup and Assembly

For ease and safety, two people are recommended for assembly.

3.1. Unpacking and Parts Identification

Carefully unpack all components and compare them with the parts list provided in the full PDF manual. Ensure all parts are present and undamaged before proceeding.

3.2. Assembly Steps Overview

The assembly process involves connecting the desk legs, attaching the feet, installing the crossbars, securing the desktop panels, mounting the hand controller, managing cables, and finally installing the monitor stand and RGB light strip.

  1. Leg Assembly: Connect the main leg components and ensure their heights are consistent before proceeding.
  2. Frame Construction: Assemble the desk frame using the provided screws and tools. Ensure all connections are secure.
  3. Desktop Attachment: Carefully place and secure the U-shaped desktop panels onto the assembled frame. Ensure there are no gaps between the panels.
  4. Keyboard Tray Installation: Attach the sliding keyboard tray mechanism and the tray itself.
  5. Monitor Stand Assembly: Assemble and attach the full-size monitor stand to the desktop.
  6. Hand Controller and Wiring: Mount the hand controller to the underside of the desk. Connect the motor cables and power cord to the controller.
  7. RGB Light Strip Installation: Adhere the RGB light strip to the designated area on the monitor stand. Connect its USB cable to the power outlet or a computer host.
  8. Cable Management: Use the provided cable snaps to organize and secure all wires neatly under the desk.

For detailed, step-by-step instructions with diagrams, please refer to the comprehensive PDF user manual available for download.

3.3. Visual Guide

Video: Product demonstration showing assembly, features, and operation.

Desk Dimension Diagram

Image: Desk Dimension Diagram. Key measurements include 120cm width, 74cm depth, and an adjustable height range of 72cm to 118cm. The monitor stand is 20cm deep and 13cm high.

4. Operating Instructions

4.1. Hand Controller Functions

The hand controller, typically mounted on the underside of the desk, features an LED display and several buttons for operation:

  • Up Arrow (▲): Press and hold to raise the desktop. Release to stop.
  • Down Arrow (▼): Press and hold to lower the desktop. Release to stop.
  • Memory Presets (1, 2, 3): Press a numbered button once to move the desk to the corresponding preset height.
  • Set Memory (S): Press 'S' once, and the height value on the display will flash. Then, press '1', '2', or '3' to save the current height to that memory position.

4.2. Parameter Settings

You can customize certain desk parameters:

  1. Enter Setting Mode: Press and hold the 'S' button for 3 seconds until the display shows

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.