D2000 D2000

Contents

D2000 Digital Bluetooth Amplifier Board User Manual

Model: D2000

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your D2000 Digital Bluetooth Amplifier Board. Please read this manual thoroughly before use and retain it for future reference.

The D2000 is a versatile 2.1-channel Bluetooth audio amplifier board designed for high-fidelity audio output. It features multiple input options and robust protection mechanisms, making it suitable for various audio applications.

2. Product Features

  • Supports Bluetooth 5.1 for long-range, unobstructed wireless connectivity (up to 10m).
  • 2.1-channel output delivering 100W + 100W + 200W high-power output.
  • Multiple input modes: Bluetooth, AUX, Microphone, FM radio, USB, TF card, and TWS.
  • Intuitive control panel design for effortless settings adjustment.
  • Brushed metal front panel with a vibrant finish and smooth, comfortable texture.
  • Integrated microphone feedback suppression function.
  • Robust internal components including large capacity capacitors, 220V transformer, enhanced field effect transistors, and shielded power inductors.

3. Product Specifications

AttributeValue
Product Name2.1 Channel Bluetooth Amplifier Board
Model NumberD2000
Bluetooth Version5.1 (unobstructed, 10m range)
Input Sensitivity500mV
InputsBluetooth + AUX + Microphone + FM + USB + TF Card + TWS
Channels2.1-channel
Amplifier ChipTPA3221
Power SupplyDC 24V/5A or higher, AC 110-220V
Compatible Speakers20-200W, 4-8Ω
Output PowerLeft/Right Channels ≤100W, Subwoofer ≤200W
Protection MechanismsOvervoltage, Undervoltage, Overheating AC/DC Detection, Short Circuit Protection
Heat Sink Dimensions60×32×42mm
Product Dimensions250×80×85mm

Note: Higher power supply voltage yields greater output power, while lower speaker impedance also increases output power. Ensure your power supply's rated power exceeds the amplifier's actual operating power.

Dimensions of the D2000 Amplifier Board
Figure 1: Product Dimensions (250mm x 80mm x 85mm)

4. Package Contents

Verify that all items are present in your package:

  • 1x Amplifier board
  • 1x Remote control
  • 1x DC cable
  • 1x Connection cable
D2000 Amplifier Board package contents with US plug
Figure 2: Package contents (US Plug variant shown)
D2000 Amplifier Board package contents with EU plug
Figure 3: Package contents (EU Plug variant shown)

5. Setup Instructions

Before connecting, ensure the amplifier is powered off and disconnected from any power source.

D2000 Amplifier Board Front Panel Layout and Controls
Figure 4: Front Panel Layout and Controls
  1. Power Connection:
    • Connect the provided DC cable to the "DC 24V IN" port on the amplifier board.
    • Alternatively, connect an AC power cable to the "AC110-220V IN" port. Ensure the power supply voltage/current is adequate for optimal performance (DC 24V/5A or higher, AC 110-220V).
    • Caution: Risk of electric shock. Do not open the casing.
  2. Speaker Connection:
    • Connect your compatible speakers (20-200W, 4-8Ω) to the speaker terminals (S+ S- L+ L- R+ R-). Ensure correct polarity.
    • For subwoofer output, connect to the dedicated subwoofer terminals.
  3. Audio Input Connection:
    • AUX Input: Connect an audio source (e.g., smartphone, CD player) to the "AUX IN" port using a 3.5mm audio cable.
    • L INPUT R: Connect an audio source to the Left and Right RCA input ports.
    • USB/TF Card: Insert a USB drive or TF card into the respective slots for media playback.
    • Microphone: Connect microphones to the "MIC1" or "MIC2" input jacks.
  4. Bluetooth Pairing:
    • Power on the amplifier.
    • Press the "MODE" button on the remote or front panel until "BT" mode is selected.
    • On your Bluetooth device, search for "DA103D" and pair.
  5. Remote Control:
    • Insert batteries into the remote control.
    • Point the remote control towards the IR receiver on the amplifier's front panel.
Front and bottom view of the D2000 Amplifier Board
Figure 5: D2000 Amplifier Board Overview
Internal view of the D2000 Amplifier Board
Figure 6: Internal Components of the Amplifier Board
Labeled internal components of the D2000 Amplifier Board
Figure 7: Key Internal Components (Microphone feedback suppression, capacitors, transformer, transistors, inductors)

6. Operating Instructions

D2000 Amplifier Board Front Panel Layout and Controls
Figure 8: Front Panel Controls Reference
  1. Power On/Off: Use the "ON/OFF" switch on the front panel to power the unit.
  2. Input Selection: Press the "MODE" button on the front panel or remote control to cycle through input modes: Bluetooth, AUX, Microphone, FM, USB, TF Card, TWS.
  3. Volume Control:
    • "VOLUME" knob: Adjusts the overall master volume.
    • "SUBWOOFER VOLUME" knob: Adjusts the subwoofer output level.
    • "R&L CHANNEL VOLUME" knob: Adjusts the volume for the left and right channels.
  4. Tone Control:
    • "TREBLE" knob: Adjusts the high-frequency response of the R&L channels.
    • "BASS" knob: Adjusts the low-frequency response of the R&L channels.
    • "SUBWOOFER FREQ" knob: Adjusts the subwoofer frequency (20-200Hz).
  5. Microphone Controls:
    • "MIC VOL" knob: Adjusts microphone volume.
    • "ECHO" knob: Adjusts the echo effect for microphones.
    • "Reverb adjustment" knob: Adjusts the reverb effect for microphones.
    • Microphone Priority Function (M.PRI): Long press the "M.PRI" button to activate/deactivate microphone priority, which lowers background music when a microphone is in use.
  6. Media Playback (USB/TF Card):
    • Insert a USB drive or TF card. The unit will automatically switch to USB/TF mode and begin playback.
    • Use the ⏪ (Previous Track) and ⏩ (Next Track) buttons for track navigation.
    • Use the ⏯ (Play/Pause) button to control playback.
    • Short press ⏪ for previous track, long press for microphone priority function.
    • Short press ⏩ for next track, long press to remove original vocals.
    • Short press ⏯ for play/pause, long press for mode switching (Bluetooth/USB/TF card/external audio/TWS).
  7. TWS Function:
    • The TWS (True Wireless Stereo) function allows two D2000 amplifier boards to be paired for a stereo sound experience. Refer to the specific TWS pairing instructions if available, or consult the seller.
  8. Vocal Cut: Use the "VOCAL CUT" button to remove vocals from tracks for karaoke.
Video 1: D2000 Amplifier Board Product Overview

7. Maintenance

  • Keep the amplifier board clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the unit to moisture, extreme temperatures, or direct sunlight.
  • Do not use harsh chemicals or abrasive cleaners.
  • Ensure adequate ventilation around the unit to prevent overheating.

8. Troubleshooting

No Sound Output:
  • Ensure the amplifier is powered on and the volume is turned up.
  • Check all audio input and speaker connections for secure contact and correct polarity.
  • Verify that the selected input mode matches your audio source.
  • Ensure the audio input signal is adequate.
  • Confirm that the power supply voltage/current is sufficient and effective.
Low Output Power:
  • Ensure the power supply's rated power exceeds the amplifier's actual operating power. Higher power supply voltage generally yields greater output power.
  • Check speaker impedance; lower impedance can increase output power.
Bluetooth Connection Issues:
  • Ensure the amplifier is in Bluetooth mode.
  • Check that your Bluetooth device is within the 10m unobstructed range.
  • Try unpairing and re-pairing the device.
Defective ON/OFF Switch (as reported by users):
  • If the ON/OFF switch does not function correctly, it may require replacement. Contact customer support for assistance.
Sound Quality Issues (as reported by users):
  • Ensure all connections are secure and free from interference.
  • Test with different audio sources and speakers to isolate the issue.
  • Adjust the TREBLE and BASS controls to optimize sound.

For complex issues or internal component problems, it is recommended to seek professional assistance. Do not attempt to repair the unit yourself unless you are qualified.

9. User Tips

  • When connecting a wireless microphone module, note that the manual does not specify the connector type for the 4-pin wireless module microphone. You may need to consult the seller or use a multimeter to identify pinouts if you are experienced with electronics.
  • The board does not have jumpers for combining two channels via the PTBL system, unlike some other models (e.g., D600E). Plan your audio setup accordingly.
  • If you experience issues with the ON/OFF switch, consider replacing it if you have the technical expertise, or contact support.
  • For optimal sound, ensure your power supply is robust and your speakers are well-matched to the amplifier's output capabilities.

10. Safety Information

  • Always disconnect power before making any connections or performing maintenance.
  • Do not expose the unit to water or excessive humidity.
  • Do not open the casing unless you are a qualified technician. There is a risk of electric shock.
  • Keep out of reach of children.
  • Use only compatible power supplies and speakers as specified.
  • Ensure proper ventilation to prevent overheating.

11. Support and Further Information

For further assistance, technical support, or warranty inquiries, please contact the seller or manufacturer directly.

A detailed user manual in PDF format is available for download: D2000 User Manual (PDF).

© 2023 D2000 Amplifier Board. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.