1. Introduction
The CHANTOWER Pure Sine Wave Inverter is designed to convert DC power (from batteries) into stable AC power, suitable for a wide range of electrical appliances. It features advanced SPWM pulse width control technology and intelligent driver chips for efficient and reliable performance.
Product Features
- Lightweight and compact design.
- High efficiency and low working noise.
- Adopts efficient SPWM Pulse Width Control Technology.
- Utilizes multiple high-tech and intelligent driver chips.
- SMT Chip Mounting Technology ensures precise control, high reliability, and low failure rate.
- High conversion efficiency, strong load capacity, and wide application range.
- Multiple intelligent security protection functions.
- Intelligent temperature-controlled fan: The fan rotates automatically when the temperature reaches a certain threshold.
Main Components Overview
- Intelligent LCD Color Display: Shows power display, input voltage, output voltage, frequency, power, and fan status.
- AC Output Sockets: Universal shaped sockets for connecting AC appliances.
- ON/OFF Switch: Controls the inverter's power.
- Input Terminals: Positive (Red) and Negative (Black) terminals for DC input.
- Cooling Fans: Efficient cooling fans for temperature control.
- Indicator Light: Green light indicates normal operation; Red light indicates protection status (e.g., overload, undervoltage).
2. Safety Precautions
To ensure safe operation and prevent damage to the inverter or connected devices, please observe the following:
Usage Environment Requirements
- Dry Conditions: Do not immerse the inverter in water or expose it to rain.
- Temperature: Operate in a cool place with temperatures between 0°C and 40°C.
- Ventilation: Do not use the power inverter in a narrow space. Do not cover the machine during use. Ensure good ventilation around the unit.
Important Considerations
- Battery Voltage Matching: A 48V inverter must only be connected to 48V batteries. A 72V inverter must only be connected to 72V batteries. Using an incorrect voltage will prevent the inverter from working or cause damage.
- Load Power: The power of the electrical appliance connected to the inverter must not exceed the continuous power rating of the inverter.
- Starting Appliances: When connecting appliances with high starting currents (e.g., refrigerators, motors), turn off the appliance switch first, then turn on the inverter switch, and then turn on the appliance switch one by one. Ensure the highest peak electrical appliance is turned on first.
- Battery Depletion: If the battery voltage drops (e.g., 12V battery drops to 10.4-11.0V), the inverter will alarm. Turn off sensitive electrical appliances promptly. The inverter will stop outputting current if the voltage drops further (e.g., 9.7-10.3V), and the red indicator light will illuminate. Start the vehicle or charge the battery to prevent depletion.
- Overvoltage Protection: While the inverter has overvoltage protection, exceeding the input voltage (e.g., above 16V for a 12V system) can still damage the unit.
- Surface Temperature: After continuous use, the inverter casing's surface temperature may rise to 60°C. Ensure smooth airflow and keep flammable objects away.
- Minors: This power inverter is prohibited for use by minors.
3. Setup and Connection
Follow these steps to correctly connect your inverter:
Direct Connection to Battery
- Ensure the inverter voltage (e.g., 48V or 72V) is consistent with your battery voltage. Multiple batteries can be used in parallel if needed.
- Connect the positive (red) ring line to the inverter's positive terminal and the negative (black) ring line to the inverter's negative terminal.
- Securely tighten the wiring terminals.
- Connect the other end of the ring lines to the battery's positive and negative poles correctly.
- Before connecting any device, ensure the inverter's switch is OFF.
- Connect your electrical device to the AC output socket of the inverter.
- Finally, turn on the inverter switch.
Connection Method for Car Cigarette Lighters
- Use an inverter equipped with a car-mounted cigarette lighter model.
- The cigarette lighter output can only carry electrical appliances with a load of less than 150W. If the load exceeds 150W, please use the direct battery connection method (Method 1).
Connection Method for Electric Motorcycle
The voltage of electric motorcycle batteries is typically 48V (four batteries) or 60V (five batteries). Select an inverter with the same voltage as your electric vehicle's battery.
4. Operation
Once the inverter is properly installed, follow these instructions for operation:
- Place the inverter switch in the OFF position and ensure good contact with the battery terminals.
- Confirm that the power of all electrical appliances is within the rated power range (typically 50% of the peak power marked by the inverter), and that the peak power of inductive load electrical appliances does not exceed the peak power marked by the inverter.
- Plug the electrical plug into the 220V output socket of the inverter.
- Turn on the switch of the power inverter. The green indicator light will illuminate, indicating normal operation.
- If the red indicator light illuminates, it indicates that the inverter has turned off due to overvoltage, undervoltage, overload, or overheating.
- In many cases, due to the limited output of the vehicle's cigarette lighter socket, the inverter may alarm or shut down. If this occurs, start the vehicle or reduce the power consumption to restore normal operation.
Intelligent Fan Control
The inverter features an intelligent temperature-controlled fan. The fan will automatically start rotating when the internal temperature reaches a certain level to maintain optimal operating temperature and prevent overheating.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your inverter:
- Cleaning: Keep the inverter clean and free from dust. Use a dry cloth to wipe the exterior.
- Ventilation: Regularly check that the cooling fans are not obstructed and that there is adequate airflow around the inverter.
- Connections: Periodically inspect all wiring connections to ensure they are tight and free from corrosion. Loose connections can lead to power loss or overheating.
- Storage: If storing the inverter for an extended period, ensure it is in a dry, cool place, away from direct sunlight and moisture.
- Battery Health: Maintain your batteries in good condition. Regularly check battery voltage and charge them as needed to prevent deep discharge, which can shorten battery life.
6. Troubleshooting
This section provides solutions for common issues you might encounter with your inverter.
| Abnormal Phenomenon | Reason | Resolution Method |
|---|---|---|
| Indicator Light is OFF, Inverter Not Working | Battery voltage inconsistent with inverter voltage. | Check the output voltage marked on the battery and replace it according to the specific situation. |
| Inverter Not Working | Reverse connection of electrical appliance positive and negative poles. | Check the battery connection. The inverter may need to be replaced or returned for warranty if damaged. |
| Inverter Not Working | Poor contact at the wiring. | Check the connecting wires and connections, and tighten the wiring terminals. |
| Red Indicator Light ON, Inverter Not Working | Battery discharged (alarm). | Charge or replace the battery. |
| Red Indicator Light ON, Inverter Not Working | Poor ventilation, causing overheating shutdown. | Turn off the machine, cool down for 15 minutes, remove items around the fan and converter, place the inverter in a cool place, reduce the use of electrical appliances as required, and restart. |
| Red Indicator Light ON, Inverter Not Working | Input voltage too high. | Check the working status of the charging system. |
| Output voltage too low | The output voltage of the correction wave inverter is too low. | Measure the output voltage using a true RMS multimeter to obtain accurate data. |
| Inverter Emits Under-voltage or Over-voltage Alarm | Poor ventilation conditions. | Improve ventilation around the machine. |
| Inverter Emits Buzzing Alarm Sound | Temperature protection. | Place the machine in a cool place and reduce the use of electrical appliances as required. |
| Inverter used for low-power appliances, but voltage decays. | Current passes through a wire, causing voltage decay. | Reduce the length of the wire and use thicker wires. |
| Battery usage time is too short. | Poor or damaged battery. | Replace the battery. |
| Battery usage time is too short. | The electricity stored in the charger cannot fully charge the appliance. | Replace it with a better intelligent charger. Reduce the length of the wire and use thicker wires. |
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | CHANTOWER |
| Rated Power (Continuous) | 750W (for 1000W peak), 800W (for 1600W peak), 1500W (for 3000W peak), 1600W (for 4000W peak), 2000W (for 5000W peak), 2500W (for 6000W peak) |
| Peak Power | 1000W, 1600W, 3000W, 4000W, 5000W, 6000W (model dependent) |
| Input Voltage | DC 48V / 72V (model dependent) |
| Output Voltage | AC 220V ±10% |
| Output Frequency | 50Hz / 60Hz (model dependent) |
| Output Waveform | Pure Sine Wave |
| Socket Type | Universal |
| Conversion Efficiency | >90% (No-load energy efficiency data: < 0.3A) |
| Built-in Fuse | 10A/15A/20A/40A/70A/120A/240A (model dependent) |
| Under Voltage Alarm | 48V: 42-45V; 72V: 54-57V |
| Low Pressure Shutdown | 48V: 39-42V; 72V: 48-52V |
| Overpressure Shutdown | 48V: 58-62V; 72V: 74-80V |
| Certification | CE |
Note: Specifications may vary slightly between different power models. Refer to the actual product for precise details.
8. User Tips
- Understand Power Ratings: Be aware that the continuous power output of the inverter might be significantly lower than its advertised peak power. For example, a "3000W" inverter might only reliably deliver around 950W-1500W continuously before triggering protection modes. Always check the continuous power rating for your specific model and consider it when connecting appliances.
- Test with Your Load: If you plan to power a specific appliance, test it with the inverter to understand its actual performance under load. Some users successfully power items like well pumps or kettles within the inverter's continuous rating.
- Monitor for Overload: If the inverter shuts off with a red LED but no low battery beep, it might be due to exceeding the actual continuous power, even if the battery voltage is stable.
- Wiring Matters: Ensure your wiring is robust and of appropriate thickness, especially for higher power loads, to prevent voltage drop and ensure efficient power delivery.
9. Warranty and Support
Warranty Terms
This product comes with a three-year warranty. To ensure proper after-sales service, customers must strictly follow the instructions when receiving and using the product.
- Product Exchange Application: Accessories must be complete and not affect secondary sales. Missing relevant accessories may result in deductions based on factory price.
- Product Warranty/Application:
- If the machine encounters quality problems without opening or modifying the original packaging, it will be repaired, replaced, or sent back to the manufacturer for free repair.
- If quality problems arise due to unauthorized opening or modification, maintenance will be paid.
- Damage resulting from dirty or old machine casings, or use in harsh environments, will incur paid maintenance.
- For high-power machine casings that are severely scratched, dirty, or old, they should be returned to the factory for repair. After repair within the warranty period, the machine will be returned to the customer in its original condition and repaired for free.
- For machines modified or unpacked without permission, any malfunctions will incur paid maintenance.
- After-sales Service: After receiving the relevant fees, we will promptly handle the after-sales service and deliver the product to the customer by express delivery.
For specific costs or to initiate returns and exchanges, please contact customer service.
A PDF version of this user manual is available for download: View User Manual (PDF)
10. Frequently Asked Questions (FAQ)
- Q: What is the input voltage range for a 72V inverter?
- A: The input voltage range for a 72V inverter is typically 60-80V DC, with an undervoltage alarm at 54-57V and low pressure shutdown at 48-52V. Overpressure shutdown occurs at 74-80V.
- Q: What is the input voltage range for a 48V inverter?
- A: The input voltage range for a 48V inverter is typically 40-60V DC, with an undervoltage alarm at 42-45V and low pressure shutdown at 39-42V. Overpressure shutdown occurs at 58-62V.