1. Introduction
The SKYDROID G16 is a high-performance remote controller designed for various RC applications, particularly airplanes. It features advanced digital video transmission, a pan-tilt function, and dual-band capabilities for stable and long-range control. Equipped with a Qualcomm 6nm processor and running on Android 13, it offers a seamless and powerful user experience with a 7-inch high-definition, high-brightness display.
2. Setup
2.1 Package Contents
- SKYDROID G16 Remote Controller
- GR01 Receiver (may vary based on specific model/package)
- Charging Cable (Type-C)
- Antennas
- Other accessories as per your specific purchase
2.2 Initial Charging
Before first use, ensure the G16 Remote Controller is fully charged. Connect the provided Type-C charging cable to the Type-C port on the controller and a compatible 36W PD fast charger. The device supports fast charging for extended battery life (7 to 9 hours).
2.3 Interface Overview
The G16 controller features several interfaces for connectivity and expansion:
- PPM Port: For Pulse Position Modulation signal output.
- Type-C Port: Used for charging and data transfer.
- USB-A Port: For connecting external USB devices.
- SIM Card Slot: For network connectivity (if supported by your model).
The receiver (e.g., GR01) offers Serial, PWM, and SBUS interfaces, and supports various video devices like cameras, gimbals, and pods via Ethernet ports.
3. Operating Instructions
3.1 Power On/Off
To power on the G16, press and hold the power button until the display illuminates. To power off, press and hold the power button again and follow the on-screen prompts.
3.2 Display and Android System
The 7-inch industrial touch screen provides a high-definition, sunlight-readable display. The G16 runs on Android 13, allowing you to install and run various ground station software smoothly. The Qualcomm 6nm processor ensures efficient performance and hardware decoding for H264/H265 video formats.
3.3 Image Transmission and Control
The G16 supports long-distance high-definition digital image transmission, providing a clear real-time view. It can achieve a remote control and image transmission distance of up to 30KM.
3.4 Dual-Band Operation
The G16 operates on dual frequency bands of 2.4GHz and 5.8GHz. It automatically switches between these bands based on the flight environment to ensure signal stability, transmission efficiency, and improved anti-interference capabilities.
4. Maintenance
4.1 General Care
- Keep the remote controller clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, direct sunlight, or moisture.
- Store the controller in a safe place when not in use to prevent physical damage.
4.2 Battery Care
The G16 features a long-lasting battery. To maximize battery life and performance:
- Charge the battery fully before extended storage.
- Avoid completely draining the battery frequently.
- Use only compatible 36W PD fast chargers.
5. Troubleshooting
- No Power: Ensure the device is fully charged. Check the Type-C charging cable and adapter.
- No Signal/Poor Range:
- Verify that both the remote controller and receiver are powered on and properly bound.
- Ensure antennas are correctly attached and oriented.
- The G16 automatically switches between 2.4GHz and 5.8GHz for optimal signal. Ensure no strong interference sources are nearby.
- Important Note: Enabling the upload/download mode of the assistant software may affect the communication range. It is recommended to use this mode at close range. The high-speed version of the G16 requires wireless module version 2 for optimal performance.
- Display Issues: Restart the device. If the issue persists, ensure the Android system is up to date.
- Software Malfunctions: If ground station software is not running smoothly, try restarting the application or the controller. Ensure sufficient RAM (4GB) and storage (64GB) are available.
6. Specifications
6.1 G16 Remote Controller Parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Display Screen | 7-inch industrial touch screen + sunlight-readable screen | Resolution | 1920*1200 |
| Processor | Qualcomm 6nm processor | System | Android 13 |
| Size | 272 × 183 × 94mm | Weight | 1.05kg |
| Battery | 20000mAh | Battery Life | 7-9 hours |
| RAM | 4G | Storage | 64G |
| Operating frequency band | 2.4G/5.8G | Channel Qty | 16 |
| Dynamic frequency adjustment | Automatic frequency hopping | Radio frequency power | 23dBm@CE/FCC |
| Remote control range | 5-20KM (ground-to-air, line of sight) | Operating temperature | -10℃~60℃ |
| Charging interface | Type-C | External interfaces | USB-A port, SIM slot, TYPE-C, PPM |
6.2 GR01 Receiver Parameters
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Working frequency band | 2.4G/5.8G | Serial port baud rate | 57600/115200/921600 |
| Power supply voltage | 7.2 ~ 72V (XT30) | Operating current | 12V/300mA |
| Data transmission port | channel 1 | Air Interface Rate | The factory default settings are 200 kbps for the uplink (upload mode ≤ 17.7 Mbps) and 15 Mbps for the downlink (download mode ≤ 30 Mbps). (Notice: Enabling the upload/download mode of the assistant will affect the communication range. It is recommended to use it at close range. The high-speed version requires wireless module version 2) |
| Network port | channel 1 | Size | 45.5 × 60 × 21.5 mm |
| SBUS/ output | channel 1 | Weight | 37g |
| PWM interface | channel 3 | Operating temperature | -10℃~60℃ |
| RF power | 23dBm@CE/FCC | Channel bandwidth | 1.25MHz/2.5MHz/5MHz/10MHz/20MHz/40MHz |
7. Warranty and Support
For warranty claims, technical support, or service inquiries, please contact the seller or manufacturer directly. Retain your proof of purchase for any warranty-related requests.