Smallrig 5564

Contents

Smallrig Carbon Shadow Single Stand Carbon Fiber Camera Tripod 5564 User Manual

Model: 5564

1. Introduction

Thank you for choosing the Smallrig Carbon Shadow Single Stand Carbon Fiber Camera Tripod, Model 5564. This versatile monopod is designed for video camera use, offering stability and portability with its carbon fiber construction. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your new equipment. Please read it thoroughly before use and retain it for future reference.

Smallrig Carbon Shadow Monopod with tripod base, fully assembled.
Figure 1: Smallrig Carbon Shadow Monopod (Model 5564)

2. Safety Information

Always observe the following safety precautions to prevent damage to the product or injury to yourself and others:

  • Do not exceed the maximum load capacity specified for your model (2.5kg for A1883FS2N, 4kg for A2883FS4N).
  • Ensure all locking mechanisms are securely tightened before mounting equipment or moving the monopod.
  • Avoid using the monopod in extreme weather conditions (e.g., strong winds, heavy rain) without proper precautions.
  • Keep hands and fingers clear of moving parts, especially when extending or collapsing the sections.
  • Do not leave the monopod unattended with heavy equipment mounted, particularly on uneven surfaces.
  • Clean the monopod with a soft, dry cloth. Avoid harsh chemicals or abrasive materials.

3. Product Components

The Smallrig Carbon Shadow Monopod consists of the following main parts:

  • Ball Head: For precise camera positioning.
  • Quick Release Plate: For quick attachment and detachment of your camera.
  • Monopod Sections: Extendable carbon fiber tubes.
  • Locking Collars: To secure extended monopod sections.
  • Tripod Base: Foldable base for added stability.
  • Handle: For comfortable grip and control.
Close-up diagram of the ball head with labeled parts: Quick Release Plate, Quick Release Clamp Locking Knob, Horizontal Locking Knob, Ball Head Locking Knob.
Figure 2: Ball Head Components
  1. Quick Release Plate
  2. Quick Release Clamp Locking Knob
  3. Horizontal Locking Knob
  4. Ball Head Locking Knob

4. Setup Instructions

Follow these steps to set up your monopod:

  1. Unfold the Tripod Base: Release the locking mechanism on the tripod base and spread the legs until they click into place, ensuring a stable foundation.
  2. Extend Monopod Sections: Loosen the locking collars on each section of the monopod. Gently pull each section upwards to extend it to your desired height.
  3. Secure Sections: Once extended, firmly tighten each locking collar to prevent the sections from collapsing.
  4. Attach Camera to Quick Release Plate: Screw your camera onto the quick release plate, ensuring it is securely fastened.
  5. Mount Camera to Ball Head: Open the quick release clamp on the ball head by turning the Quick Release Clamp Locking Knob. Insert the quick release plate with your camera into the clamp and tighten the knob until the camera is firmly secured.
  6. Adjust Ball Head: Loosen the Ball Head Locking Knob to adjust the camera angle. Use the Horizontal Locking Knob for panoramic adjustments. Tighten both knobs once the desired position is achieved.
Comparison image showing the monopod in its folded (680mm / 26.8in) and fully extended (1655mm / 65.6in) states.
Figure 3: Monopod Folded and Extended Lengths

5. Operating Instructions

Operating your Smallrig monopod is straightforward:

  • Height Adjustment: To change the monopod's height, loosen the locking collars, adjust the sections, and re-tighten.
  • Camera Angle Adjustment: Loosen the Ball Head Locking Knob to tilt or pan your camera. Re-tighten to lock the position.
  • Panoramic Movement: For smooth horizontal rotation, loosen the Horizontal Locking Knob.
  • Stability: Always ensure the tripod base is fully extended and stable on the ground. For maximum stability, place one foot on one of the tripod base legs.
  • Portability: When not in use, collapse all sections and fold the tripod base for compact storage and transport.
Smallrig Carbon Shadow Monopod, folded, showing the tripod base retracted.
Figure 4: Monopod in folded position

6. Maintenance

  • Cleaning: Wipe down the carbon fiber sections and metal parts with a soft, dry, lint-free cloth after each use. If necessary, use a slightly damp cloth and then dry thoroughly.
  • Lubrication: Do not lubricate the monopod sections or locking mechanisms unless specifically instructed by Smallrig support.
  • Storage: Store the monopod in a dry, cool place, away from direct sunlight and extreme temperatures.
  • Inspection: Regularly check all screws, knobs, and locking mechanisms for tightness and wear. Tighten any loose parts.

7. Troubleshooting

Problem Possible Cause Solution
Monopod sections slip or collapse. Locking collars are not tightened sufficiently. Ensure all locking collars are firmly tightened after extending sections.
Ball head does not hold position. Ball Head Locking Knob is loose. Tighten the Ball Head Locking Knob firmly. Ensure camera weight does not exceed capacity.
Camera feels wobbly on the quick release plate. Camera not securely attached to the quick release plate, or plate not secured in the clamp. Check that the camera screw is tight on the plate and the Quick Release Clamp Locking Knob is fully tightened.

8. Specifications

General specifications for the Smallrig Carbon Shadow Monopod (Model 5564):

  • Type: MONOPOD
  • Use: Video Camera
  • Material: Carbon Fiber
  • Origin: Mainland China
  • Max Extended Length: 1655mm (65.6 inches)
  • Folded Length: 680mm (26.8 inches)
  • Weight: Approximately 2400g (2.4kg)
  • Package: Yes

Detailed Specifications by Model:

Feature A1883FS2N A2883FS4N
Sections 4 4
Max Tube Diameter 26mm 29mm
Min Tube Diameter 17mm 20mm
Max Height 1650mm 1655mm
Height without Center Column 1360mm 1335mm
Min Height 540mm 555mm
Storage Height 535mm 550mm
Load Capacity 2.5kg 4kg
Net Weight 2.13kg 2.86kg
Ball Bowl Diameter 56mm 56mm

Note: Product parameters are measured manually and may have slight errors. Data is subject to the actual product. Online product images may vary slightly in color due to environmental light and flash photography.

9. User Tips

  • Always double-check the tightness of all locking knobs and collars before and during use, especially when changing locations or camera setups.
  • When using the monopod with heavier cameras, ensure the tripod base is fully deployed and consider using additional support if available.
  • For quick adjustments, familiarize yourself with the feel of the locking knobs to make changes efficiently without looking.

10. Frequently Asked Questions (FAQ)

Q: Is the product currently in stock?
A: For real-time stock availability, please refer to the product page or contact the seller directly. Stock levels can fluctuate.

11. Warranty and Support

Smallrig products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Smallrig website. If you encounter any issues or require technical assistance, please contact Smallrig customer support.

A detailed user manual in PDF format may also be available for download. Please check the product page or the manufacturer's website for the latest version of the User Manual (PDF).

© 2023 Smallrig. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.