Sumry ECO SERIES

Contents

Sumry ECO Series Hybrid Solar Inverter

User Manual for 4.2KW and 6.2KW Models

1. Introduction

The Sumry ECO Series Hybrid Solar Inverter is an advanced power solution designed for both on-grid and off-grid solar energy systems. It integrates a pure sine wave inverter, a 120A MPPT solar charger, and a battery charger into one compact unit. This inverter is capable of operating with or without a battery and features dual communication ports for enhanced system monitoring and control. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Sumry ECO Series Hybrid Solar Inverter.

Front view of the Sumry ECO Series Hybrid Solar Inverter with its display panel.

Figure 1: Front view of the Sumry ECO Series Hybrid Solar Inverter

2. Safety Information

Please read all instructions and cautionary markings on the unit and in this manual before installation and operation. Failure to follow these instructions may result in electric shock, fire, or severe injury.

  • Ensure all wiring is performed by qualified personnel.
  • Do not disassemble the inverter. There are no user-serviceable parts inside.
  • Keep the inverter away from flammable materials and liquids.
  • Ensure proper ventilation around the inverter to prevent overheating.
  • Verify that the input and output voltages are within the specified ranges before connecting.
  • Always disconnect all power sources (PV, utility, battery) before performing any maintenance or wiring.

3. Product Features

  • Pure sine wave solar inverter (on/off Grid capability)
  • Output power factor 1.0
  • WIFI & GPRS connectivity for iOS and Android monitoring
  • Ability to operate without a battery
  • One-key restoration to factory settings
  • Built-in Lithium battery automation activation
  • Dual communication ports for battery and Wifi communication (RS232/RS485/WIFI/GPRS/LITHIUM BATTERY)
  • Built-in 120A MPPT Solar charger: max 6200W (for 4.2KW model), max 6500W (for 6.2KW model)
  • High PV input voltage range (60~500VDC)
  • Built-in anti-dust kit for harsh environments
  • Smart battery charge design to optimize battery life
  • Dual AC output

4. Product Overview

Familiarize yourself with the inverter's components and connection ports.

Rear view of the inverter showing AC In, Main Out, Second Out, Input Breaker, Battery, and PV In ports.

Figure 2: Rear view of the inverter with connection ports

4.1. Connection Ports:

  • AC IN: Connection for utility grid input (220/230VAC).
  • MAIN OUT: Primary AC output for connected loads.
  • SECOND OUT: Secondary AC output for additional loads (dual output feature).
  • INPUT BREAKER: Circuit breaker for AC input (250VAC).
  • BATTERY (+/-): Terminals for connecting battery packs (24VDC or 48VDC).
  • PV IN (+/-): Terminals for connecting solar modules.
  • Communication Ports: RS232, RS485, WIFI, GPRS, Lithium Battery communication ports.

5. Installation

Proper installation is crucial for the safe and efficient operation of the inverter. Always consult with a qualified electrician for installation.

5.1. Mounting the Inverter

  • Choose a suitable location that is dry, well-ventilated, and protected from direct sunlight and moisture.
  • Ensure adequate clearance around the inverter for heat dissipation.
  • Mount the inverter vertically on a sturdy wall using appropriate fasteners.

5.2. Wiring Diagram

The following diagram illustrates a typical system setup for the Sumry ECO Series Hybrid Solar Inverter. Ensure all connections are secure and correctly polarized.

System wiring diagram showing connections between solar modules, generator, utility grid, inverter, battery packs, and home appliances.

Figure 3: Typical System Wiring Diagram

5.3. Connection Steps

  1. Battery Connection: Connect the battery packs to the BATTERY (+/-) terminals. Ensure correct polarity.
  2. PV Array Connection: Connect the solar modules to the PV IN (+/-) terminals. Verify the PV input voltage is within the MPPT range (60-450VDC) and maximum DC voltage (500VDC).
  3. AC Input Connection (Utility/Generator): Connect the utility grid or generator to the AC IN (L, N) terminals.
  4. AC Output Connection (Loads): Connect your home appliances or loads to the MAIN OUT (L, N) and SECOND OUT (L, N) terminals.
  5. Communication Connections: Connect any desired communication modules (WIFI, GPRS, RS232, RS485) or lithium battery communication cables to their respective ports.
  6. Grounding: Ensure the inverter is properly grounded.

WARNING: Incorrect wiring can cause severe damage to the inverter and connected devices. Always double-check all connections before applying power.

6. Operation

Once installed, the inverter can be configured and operated via its display panel and communication interfaces.

6.1. Initial Startup

  1. Ensure all physical connections are secure.
  2. Turn on the battery breaker (if applicable).
  3. Turn on the PV array breaker (if applicable).
  4. Turn on the AC input breaker (utility/generator).
  5. The inverter will perform a self-test and then begin operation according to its default or pre-configured settings.

6.2. Operating Modes

The inverter supports various operating modes, including on-grid, off-grid, and hybrid modes. Refer to the on-screen display and the detailed software manual (if provided separately) for mode selection and parameter adjustments.

6.3. Monitoring

The inverter's display panel provides real-time information on system status, input/output voltages, current, power, and battery status. For remote monitoring, use the WIFI or GPRS module with the compatible iOS/Android application.

7. User Tips

  • Battery Management: For optimal battery life, ensure your battery type and charging parameters are correctly configured in the inverter settings.
  • Ventilation: Regularly check that the inverter's ventilation openings are clear and not obstructed to prevent overheating.
  • Firmware Updates: Keep an eye out for official firmware updates to ensure your inverter operates with the latest features and improvements.
  • System Sizing: Ensure your solar array and battery bank are appropriately sized for your energy consumption and inverter capacity to maximize efficiency.

8. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your inverter.

  • Cleaning: Periodically clean the exterior of the inverter with a dry cloth. Do not use liquid cleaners. Ensure the anti-dust kit is clean and functioning.
  • Connections: Annually inspect all electrical connections for tightness and signs of corrosion.
  • Ventilation: Ensure the cooling fans and vents are free from dust and debris.
  • Performance Check: Monitor the inverter's performance through the display or monitoring app to detect any anomalies early.

9. Troubleshooting

This section provides solutions to common issues. For more complex problems, contact technical support.

Problem Possible Cause Solution
Inverter not turning on No power from battery, PV, or utility; input breaker tripped. Check all power connections and breakers. Ensure battery voltage is sufficient.
No AC output Overload; output breaker tripped; inverter fault. Reduce load. Check output breakers. Consult display for error codes.
PV input not charging battery Low PV voltage; PV array disconnected; MPPT fault. Check PV connections and voltage. Ensure sufficient sunlight.
Communication issues (WIFI/GPRS) Module not connected; network issues; incorrect settings. Verify module connection. Check network signal. Review communication settings.

10. Specifications

Parameter VICTOR NM-ECO-4.2KW PLUS VICTOR NM-ECO-6.2KW PLUS
Maximum PV Input Power 6200W 6500W
Rated Output Power 4200W/4200VA 6200W/6200VA
Maximum Solar Charging Current 120A
GRID-TIE OPERATION - PV INPUT (DC)
Nominal DC Voltage / Maximum DC Voltage 360/500VDC
Start-up Voltage / Initial Feeding Voltage 60VDC/90VDC
MPPT Voltage Range 60-450VDC
Maximum Input Current 1/18A 1/22A
GRID-TIE OPERATION - GRID OUTPUT (AC)
Nominal Output Voltage 220/230/240VAC
Output Voltage Range 195-253VAC
Nominal Output Current 18.2A 27.0A
Power Factor >0.99
Maximum Conversion Efficiency (DC/AC) 98%
TOW LOAD OUTPUT POWER
Full Load 4200W 6200W
Maximum Main Load 4200W 6200W
Maximum Load Cut Off Voltage 26VDC 52VDC
Maximum Load Return Voltage 27VDC 54VDC
OFF-GRID OPERATION - BATTERY MODE OUTPUT (AC)
Nominal Output Voltage 220/230/240VAC
Output Wave Form Pure sine wave
Efficiency (DC to AC) 94%
BATTERY & CHARGER
Nominal DC Voltage 24VDC 48VDC
Maximum Solar Charging Current 120A
Maximum AC Charging Current 100A
PHYSICAL
Dimension (H*W*D) 420*350*110mm
Carton Dimension (H*W*D) 500*415*180mm
Net Weight 8.0 kg 8.9 kg
Gross Weight 9.0 kg 10.0 kg
INTERFACE
Communication Port RS232/RS485/WIFI/GPRS/LITHIUM BATTERY
ENVIRONMENT
Humidity 5% to 95% Relative Humidity (Non-condensing)
Operating Temperature -10℃ to 50℃
STANDARD
Compliance Safety CE

11. Warranty & Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your vendor or the manufacturer's customer support. Ensure you have your product model and serial number ready when contacting support.

Contact information provided by the seller: Whats-App: +86 158-0252-3190, We-Chat: +86 158-0252-3190, or email: 229-320-0068@qq.com.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.