1. Introduction
The ATK 68RX and 60RX are high-performance magnetic switch mechanical keyboards designed for both daily office work and intensive gaming. These keyboards are essential input devices for computers, facilitating text, number, symbol input, and command execution with speed and precision. They feature advanced magnetic switches, ultra-low latency, and high polling rates to enhance user experience.
2. Safety & Warnings
General Safety Information
- This product is intended for users aged 14 years and older.
- Always use the product under appropriate supervision, especially for younger users.
Important Warnings
WARNING: Choking Hazard
This product contains small parts. Keep out of reach of children under 3 years of age to prevent choking. In case of ingestion, seek medical attention immediately.
WARNING: Magnetic Components
The keyboard contains magnetic sensitive components. When using it, please keep a distance of at least 30cm from magnetic objects such as speakers, headphones, watches, and other electronic devices to avoid interference.
WARNING: Not Waterproof
This product does not have a waterproof function. Please avoid liquid from entering to prevent short circuits or PCB damage, which may affect normal use and is not covered by warranty.
WARNING: Usage Sensitivity
When setting limit parameters for the magnetic switches, be aware that desktop vibrations can cause keyboard resonance. Even slight pressure on the key switches, or pressing them all the way down and then lifting them slightly, can trigger or disconnect the keyboard. Adjust settings carefully.
Note: Damage caused by human falling, pressing, smashing, etc., is not covered by the warranty, and the relevant losses will be borne by the user.
3. Package Contents
Please check the box for the following items:
- Packaging shell
- Product warranty certificate
- Keyboard body (ATK 68RX or 60RX)
- Plastic replacement parts for hand rest (same color as the keyboard shell)
- M2 cross screwdriver
- 6-in-1 switch puller
- 8K low resistance data cable
- Interchangeable streamer panels
- 9 personalized ribbons
- Additional keycaps
Before first use, carefully remove all packaging materials. Keep plastic bags away from children to avoid suffocation. Inspect the product for any damage before use.
4. Setup
4.1 Connecting the Keyboard
The ATK 68RX/60RX keyboard uses a wired USB connection. Connect the provided 8K low resistance data cable to the Type-C port on the keyboard and the other end to an available USB port on your computer.
The keyboard is compatible with Windows, macOS, and Linux operating systems.
4.2 Attaching the Hand Rest and Adjusting Foot Support
The keyboard features a detachable full CNC hand rest for ergonomic support. Align the hand rest with the keyboard and secure it as intended. The keyboard also has adjustable two-section foot support, allowing you to set the typing angle for optimal comfort and stability.
4.3 Customizing Streamer Panels and Keycaps
The keyboard comes with interchangeable streamer panels and additional keycaps, allowing for personalized aesthetics. Use the provided tools to carefully remove and replace these components as desired.
5. Operating Instructions
5.1 Magnetic Switch Technology
The ATK keyboards utilize magnetic switches, offering high precision and customization:
- RT Accuracy: 0.005mm
- Step Accuracy: 0.001mm
- Adjustable Range: 0.005mm to 3.3mm
This allows for fine-tuning of actuation points to suit individual preferences for gaming and typing.
5.2 Performance Features
- Polling Rate: True 8000Hz for fast and stable input.
- Latency: Ultra-low 0.08ms competition-grade latency.
- Scanning Rate: 256K ultra-high scanning rate (32K full-key).
- Zero-Dead-Zone Technology: Ensures smoother skill execution and quicker emergency stops by allowing adjustable deadband on both top and bottom.
5.3 Backlight and Customization
The keyboard features a multicolor backlight with 16 million colors and 22 preset lighting effects. Use the keyboard's software (available at WWW.ATKGEAR.COM) to customize lighting, key remapping, and adjust dead zones (RT/DKS/MT/TGL support).
5.4 Competitive Paddle (ATK 68RX only)
The ATK 68RX model includes a competitive paddle feature, allowing for one-touch switching between three custom modes (e.g., office and gaming status) via the driver software.
6. Maintenance
6.1 Cleaning
- Regularly clean the keyboard with a soft, dry cloth.
- For dust and debris between keycaps, use compressed air.
- To clean under keycaps, use the provided switch puller to carefully remove keycaps and clean the switch area. Ensure the keyboard is disconnected before cleaning.
- Avoid using harsh chemicals or abrasive materials that could damage the keyboard's finish or components.
6.2 Storage
When not in use, store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, consider using the original packaging to protect it from dust and potential damage.
7. Troubleshooting
- Keyboard not responding: Ensure the USB cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- Keys not registering: Check if any software settings (e.g., dead zones) are preventing key presses from registering. If using hot-swappable switches, ensure switches are fully seated.
- Backlight issues: Verify that the backlight is enabled through the keyboard's software or dedicated function keys. If specific keys are not lighting up, it might indicate a switch or LED issue.
- Interference with magnetic devices: If experiencing erratic behavior, ensure the keyboard is at least 30cm away from strong magnetic sources like speakers or headphones.
- Unstable performance: Ensure you are using the original data cable. If the light brightness is set too high and the computer interface is not powered enough, it may cause instability. Please adjust the light brightness carefully.
If problems persist, refer to the official ATK website for further support or driver updates.
8. Specifications
The ATK 68RX and 60RX keyboards come in various configurations. Below are the detailed specifications:
| Product Name | ATK 60 RX | ATK 68 RX | ATK 68 RX Forged Carbon Version |
|---|---|---|---|
| Color Matching | White, Black | Pink | Forged carbon version |
| Shaft Body | Glass blade shaft | Wolf axis / Hunyuan axis | Axis of heaven and earth |
| Satellite Axis | V1 demagnetized satellite axis | ||
| RT Adjustment Range | 0.005 ~ 3.3mm | ||
| RT Step Accuracy | 0.001mm | ||
| Delay | 0.08ms | ||
| Scanning Rate | 256K | ||
| Polling Rate | 8000 Hz | ||
| Keycap | PC top fog transparent keycap | ||
| Liner Filling | Aluminum alloy positioning plate + silicone sandwich cotton + Ixpe shock-absorbing pad + pet voice actor pad | ||
| Bottom Padding | Epdm shaft seat cotton + po silicone composite bottom cotton | ||
General Properties:
- Switches Hot Swap: Yes
- Backlight Type: Multicolor (RGB, 16 million colors, 22 preset effects)
- Interface Type: Wired USB
- Keyboard Standard: 68 keys
- Style: Standard, Ergonomics, Gaming, Mini, For Laptop, For Tablet
- Application: Desktop, Laptop, Tablet
- Operation Style: Mechanical
- Language: English
- Battery Included: No (Wired keyboard)
- Origin: Mainland China
9. User Tips
- Experiment with RT settings: Take time to adjust the magnetic switch actuation points (RT adjustment range 0.005-3.3mm) to find the perfect sensitivity for different games or typing tasks.
- Utilize customization software: Download the official ATK software from WWW.ATKGEAR.COM to unlock full customization for RGB lighting, key remapping, and advanced magnetic switch settings.
- Keep it clean: Regular cleaning of keycaps and under the switches can prevent dust buildup and maintain optimal performance and feel.
- Secure cable connection: Always ensure the USB cable is firmly connected to avoid intermittent disconnections during use, especially during critical gaming moments.
10. Warranty & Support
Your ATK keyboard comes with a product warranty certificate included in the package. Please retain this certificate and your proof of purchase for any warranty claims.
Manufacturer Information:
Company Name: Chongqing Mengya Rabbit Network Technology Co., Ltd.
Address: Building 15-5, #15-5-319, Qiyuan 1st Road, Yuzhou Road Sub-district, Jiulongpo District, Chongqing City, CN Chongqing
Phone Number: 86-18723183702
Email: 913331165@qq.com
EU Authorized Representative:
Company Name: MJCM SARL
Address: 78 avenue des Champs Elysees Bureau 326, PARIS, FR
Email: mjcm190928@gmail.com
Online Support:
For driver downloads, software, and additional support, please visit the official ATK website: WWW.ATKGEAR.COM
A user manual in PDF format may also be available for download: View User Manual (PDF)