Mudiro M-5S EVO-H

Contents

Mudiro M-5S EVO-H 8KW Diesel Heater User Manual

Model: M-5S EVO-H | Brand: Mudiro

1. Introduction

1.1 Product Overview

Diesel heaters are on-board heating devices that are independent of the automobile engine, and have their own fuel lines, circuits, combustion heating devices, and control devices. Originally, the machine was often used to preheat the engine and cab of a car parked in a cold environment in winter, as a way to eliminate cold start wear and tear of the car. Now diesel heaters have a wider range of uses, which can be used as space heating equipment in tents, indoors, and RVs, making users living and traveling more comfortable.

1.2 Explanation of Principles (Heat Source, Heating, Control)

1.2.1 Heat source:

After the equipment is started, the ignition plug will continue to heat up. This process will take 1-3 minutes. Then the fan will be started to deliver air to the combustion chamber, and the diesel pump will also pump the diesel into the combustion chamber. After the atomized diesel is mixed with gas, it begins to burn after coming into contact with the high-temperature ignition plug, generating a large amount of heat. The high-temperature exhaust gases after combustion are discharged from the exhaust gas outlet below.

1.2.2 Heating:

The heat generated in the combustion chamber is quickly transferred to the aluminum heat exchanger and dissipated into the warm air duct via the aluminum fins. An external fan blows the gas around the heat exchanger, and the heated air is blown out of the warm air outlet.

1.2.3 Control:

The controller is embedded in the device, and the user can control the device through the switch panel connected to the controller. The user can check the running status of the equipment, control the gear, and make an appointment through the switch panel. Users can also use the remote control or install the app developed by Mudiro for remote control.

2. Specifications

AttributeValue
Switch TypeLCD Switch
FuelDiesel
Voltage12V/24V/240V (with adapter)
Item Weight9.5kg
Item Height25cm
Item Width25cm
Item Length37cm
Brand NameMudiro
OriginMainland China
CertificationCE, RoHS
Item TypeHeating & Fans
Heating Area215ft² ~ 289ft²
Adjustable Temperature Range46.4°F – 96.8°F
Fuel Consumption0.12–0.36L per hour
Altitude CompensationUp to 18,045 ft (5,500 m)

2.1 Internal Key Parts Terminology

Understanding the internal components is important for maintenance and repair. Refer to the diagram below for key parts.

Diagram of internal components of the diesel heater, showing Control box, Ignition plug, Safety plug, Combustion chamber, Heating zone, Air inlet, Air outlet, Air fan, and Flame retardant impeller.
Figure 1: Internal Key Parts Diagram

3. Packing List

The Mudiro M-5S EVO-H diesel heater package includes the following items:

Image showing the packing list for the M-5S EVO-H Diesel Heater, including the heater unit, LCD Switch, optional Adapter, Remote Control, User Manual, Intake and Exhaust Pipe, Air Outlet Pipe, Elbow, Muffler, Air Filter, Installation Parts, and LCD Switch Extension Cord.
Figure 2: Included Components
  • 1x M-5S EVO-H Diesel Heater (Host)
  • 1x LCD Switch
  • 1x Remote Control
  • 1x User Manual
  • 1x Intake and Exhaust Pipe
  • 1x Air Outlet Pipe
  • 1x Elbow (Vent)
  • 1x Muffler
  • 1x Air Filter
  • 1x Silent Oil Pump
  • 1x LCD Switch Extension Cord
  • 1x Set of Installation Parts
  • 1x AC-DC Power Adapter (Optional purchase)

4. Installation Instructions

4.1 Power Supply Requirements

Please use a 12V or 24V DC power supply to power your device, or use an AC to DC adapter. The discharge current is recommended to be greater than 15A (the device needs to heat the glow plug when starting, and the operating current may reach 12A and last for 3-5 minutes).

4.2 Installation Diagram

The installation process involves connecting the exhaust pipe, intake pipe, air outlet pipe, and electrical connections. Ensure all connections are secure.

Diagram showing the installation of the diesel heater with its components, including the main unit, exhaust pipe, intake pipe, air outlet, and electrical connections. An optional AC-DC adapter is also shown.
Figure 3: General Installation Diagram

WARNING: Exhaust Pipe Temperature

The exhaust pipe works at a very high temperature! During installation, use, maintenance, and scrapping of this machine, there shall be no flammable or explosive materials around the exhaust pipe. Care must be taken to avoid igniting flammable materials that may cause fire. The discharged exhaust gas can reach temperatures as high as 400°C. Please keep it away from your pets and children, and be aware of the gap from the ground to avoid damaging your floor or lawn.

5. Operation

5.1 Smart LCD Switch (K007)

The K007 LCD switch provides comprehensive control and monitoring of your diesel heater. Familiarize yourself with its buttons and display.

Detailed diagram of the Smart LCD Switch with numbered labels pointing to different parts of the display and buttons. The labels describe functions like Power Button, Confirm Button, Adjust Up/Down, Remote Control Pairing Status, Bluetooth Connection Status, Voice Broadcast Indicator, Power Supply Voltage Display, Real-time Altitude Display, CO Alarm Time and CO Level Display, CO Alarm On/Off, Language Indicator, Gear Temperature Setting, Case Temperature or Set Temperature Display, and Temperature Unit.
Figure 4: Smart LCD Switch Interface

5.1.1 Button Functions

Image showing the K007 switch with button functions: Power button (long press to turn on/off), OK button (short press to switch display, long press for menu, short press to confirm in menu, long press to return), Up button (short press to increase temp/fuel, short press to increase parameters in menu), Down button (short press to decrease temp/fuel, long press for voice prompt, short press to decrease parameters in menu).
Figure 5: K007 Switch Button Functions
  • Power Button (Power Button Icon): Long press to turn on/off the heater.
  • OK Button (OK Button Icon):
    • Short press on the main interface: Switch between ambient temperature and housing temperature.
    • Long press on the main interface: Enter the menu page.
    • On the menu page: Short press to confirm settings, long press to return.
  • Adjust Up Button (Up Button Icon):
    • Short press on the main interface: Increase working temperature or fuel quantity.
    • On the menu page: Short press to increase parameters.
  • Adjust Down Button (Down Button Icon):
    • Short press on the main interface: Decrease working temperature or fuel quantity.
    • Long press on the main interface: Enable/disable voice prompt.
    • On the menu page: Short press to decrease parameters.

5.1.2 Menu Page Function Introduction

Long press the OK key to enter the menu page.

  • Language Switch: Short press Up or Down to select language/flag, then short press OK to switch.
  • Mode Switch: Short press OK to switch between:
    • Temperature control mode: Auto Mode (AT) <=> Manual Mode (MT)
    • Altitude unit of measurement: Meter (M) <=> Foot (FT)
    • Temperature unit: Celsius (°C) <=> Fahrenheit (°F)
    • Auto start-stop function: ON <=> OFF. The unit powers on if ambient temp is 2°C or more below set temp, and powers off if ambient temp is 1°C or more above set temp.
    • Extreme Heat Mode: ON <=> OFF. Increases fuel pump output and adjusts air-fuel ratio for rapid heating.
  • Remote Control Pairing: Short press Up or Down to select remote icon, then short press OK to start pairing. The remote icon will flash. Press the power key on the remote control for connection. After successful connection, the remote icon on the control panel will light up.
  • Manual Fuel Pumping: Short press Up to enable, Down to disable. Stop pumping once fuel reaches the oil inlet. Excessive fuel causes black smoke.
  • Timing Setting:
    • If not connected to Bluetooth: Short press Down to select time calibration icon, then OK to enter. Set hour, minute, second, week. Short press OK to confirm. Long press OK to return.
    • Select timing setting icon, short press OK to enter on/off time setting. Select week, time, on/off status, weekly cycle. Short press OK to confirm. Long press OK to exit.
    • Note: With Bluetooth connection, time is automatically calibrated. The device supports three timing schedules per day, but only one group is usable daily for simplified operation.
  • Parameter Settings: Optimal parameters are preset. Do not modify arbitrarily. Contact manufacturer for password if adjustment is needed.
  • Carbon Monoxide Parameters:
    • CO alarm function: Short press OK to turn on/off.
    • Alarm time setting: Short press OK to enter. Up/Down to adjust time duration. Save with long press OK.
    • CO alarm threshold setting: Short press OK to enter. Up/Down to adjust value. Save with long press OK.
Image showing the K007 switch display with various mode settings like Auto Mode, Manual Mode, Meter, Foot, Celsius, Fahrenheit, ON/OFF for auto start-stop, and Extreme Heat Mode. It also shows icons for auto start-stop status.
Figure 6: K007 Switch Mode Settings
Image showing the K007 switch display with options for Manual Fuel Pumping (Display Off/On), Timing Setting, and Parameter Settings. It highlights the icons for these functions.
Figure 7: K007 Switch Advanced Settings

5.2 Bluetooth APP Download Guide

The Mudiro diesel heater can be controlled via a smartphone app. Scan the QR code below or search for the app in your app store.

QR codes for iOS and Android app downloads. The iOS QR code is for 'Air Heater' and the Android QR code is for 'Warm Drive'.
Figure 8: APP Download QR Codes
  • iOS System: Scan the QR code via your iPhone browser to download the iOS APP, or open the App Store and search for "Air Heater" to download.
  • Android System: Scan the QR code with an Android browser to download the Android APP, or open Google Play and search for "Warm Drive" to download.

First Connection:

Tap "Connect Device" in the APP. The control switch will display the pairing icon. Then short press the OK key on the switch to confirm connection.

6. Maintenance

Regular maintenance ensures the longevity and efficient operation of your diesel heater. Always ensure the device is turned off and cooled down before performing any maintenance.

  • Cleaning: Periodically clean the air filter to ensure proper airflow. Dust and debris can accumulate and reduce efficiency.
  • Fuel System Check: Inspect the fuel lines for any kinks, blockages, or leaks. Ensure the fuel pump is operating correctly.
  • Exhaust System Check: Verify that the exhaust pipe is clear of obstructions and securely connected. Ensure no flammable materials are near the hot exhaust.
  • Electrical Connections: Check all wiring harnesses and connectors for secure and undamaged connections.
  • Sensor Check: Ensure all sensors (temperature, altitude, CO) are clean and properly connected.

For internal component inspection or repair, refer to the Internal Key Parts Terminology diagram in Section 2.1.

7. Troubleshooting

The LCD switch displays fault codes to help diagnose issues. Refer to the table below for common fault codes and their solutions.

Image showing the K007 switch main interface with various indicators and a table of fault codes (E-01 to E-05) and their solutions.
Figure 9: K007 Switch Main Interface and Fault Codes (Part 1)
Fault CodeMachine FaultSolution
E-01Power UndervoltageThe power supply voltage is insufficient. It is necessary to raise the supply voltage.
E-02Power OvervoltageSupply voltage is too high, please reduce the supply voltage.
E-03Glow Plug FaultCheck the glow plug for open circuit or short circuit.
E-04Fuel Pump FaultCheck the fuel pump and wiring harness for open circuit or short circuit.
E-05Machine OverheatingCheck the temperature sensor on the housing and whether the fan speed is abnormal.
E-06Motor FaultCheck magnet polarity, Hall sensor position, or loose motor terminals.
E-07Wire Disconnection FaultCheck the panel connector, loose or broken connection of the blue wiring harness.
E-08Flame ExtinctionCheck the oil circuit for air or wax blockage, which causes poor fuel supply.
E-09Sensor FaultCheck if the sensor connector is loose, broken or short-circuited.
E-10Ignition FailureCheck for blocked oil circuit, poor oil intake, seized fuel pump, or clogged vaporization mesh caused by poor fuel quality, which leads to abnormal combustion during secondary ignition.
E-11Altitude Sensor FaultAltitude sensor malfunction.
E-12Inlet Air Temperature Sensor FaultInlet air temperature sensor malfunction.
E-13Outlet Air Temperature Sensor FaultOutlet air temperature sensor malfunction.
E-14Carbon Monoxide Sensor FaultAdjust the carbon monoxide threshold.
Table of fault codes (E-06 to E-14) and their solutions for the diesel heater.
Figure 10: Fault Codes (Part 2)

8. User Tips

Based on user experiences, here are some helpful tips for using your Mudiro diesel heater:

  • App Control: The smartphone app (Air Heater/Warm Drive) is highly recommended for easier operation and access to detailed information like voltage and operating temperature.
  • Quiet Operation: The upgraded fuel pump ensures very quiet operation, making it suitable for overnight use in RVs or tents without disturbance.
  • Efficient Heating: The heater starts quickly and provides effective heating, even in cold conditions.
  • Timer Functionality: Utilize the weekly on/off programmer for automated heating schedules, enhancing convenience.
  • Fuel Line Care: The heater features improved fuel line design with springs to prevent kinking, contributing to reliable fuel delivery.
  • Voice Prompts: If the voice prompts are not preferred, they can be disabled via a long press on the 'Down' button on the LCD switch.
  • Power Adapter: If using 240V, an AC-DC adapter is required and may need to be purchased separately if not included in your specific package.

9. Warranty & Support

9.1 Contact Us

Thank you for your support and trust in us. Parking heater structures are complex, and you may use them in various outdoor or indoor environments, therefore you may encounter various unexpected situations. If you encounter difficulties that you cannot resolve, you can contact us, and we will guide you in adjustments or repairs.

If you need our after-sales technical support, or if you have any questions about our products, you can send an email to mudiromarketing@gmail.com or contact our after-sales personnel through the sales platform where you purchased the product. We will provide you with more detailed instructions or operational videos. Thank you for your feedback and support.

9.2 FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.