RADIOMASTER ERS-RC01

Contents

Radiomaster ERS-RC01 CDI Gas Engine Tachometer Instruction Manual

Model: ERS-RC01

1. Introduction

The ERS-RC01 Gasoline Engine Tachometer is designed to measure engine RPM by connecting directly to your engine's CDI speed output. This sensor accurately detects engine speed and transmits the data to a compatible ExpressLRS receiver through the CRSF interface. The data is then sent back to your EdgeTX radio for real-time monitoring. It is an ideal solution for any application requiring accurate RPM feedback for gasoline engines.

As a member of the ERS sensor family, the ERS-RC01 also supports pass-through expansion, enabling easy daisy-chaining with additional telemetry modules for a comprehensive monitoring setup.

Radiomaster ERS-RC01 CDI Gas Engine Tachometer

Image: Radiomaster ERS-RC01 CDI Gas Engine Tachometer with antenna and wiring.

2. Features

  • Accurate Engine RPM: Monitors gasoline engine speed in real time with high precision.
  • ExpressLRS Integration: Seamlessly sends RPM data to compatible ExpressLRS receivers via the CRSF interface.
  • Versatile Applications: Suitable for various applications requiring precise RPM feedback for gasoline engines.
  • Compact & Lightweight: Designed for easy installation without adding significant weight to your setup.
  • Plug-and-Play: Offers simple connection to the CDI output for quick and straightforward setup.
  • Daisy Chain Expansion: Supports pass-through expansion for easy integration with other ERS telemetry modules.
  • Real-time Data Monitoring: Provides instant RPM data feedback to your EdgeTX radio.
Radiomaster ERS-RC01 RPM-CDI Sensor overview with features

Image: Overview of the ERS-RC01 RPM-CDI Sensor highlighting its key features including Daisy Chain Expansion, Real-time Data Monitoring, Plug and Play, and ExpressLRS™ Compatibility.

3. Package Contents

The ERS-RC01 package includes the following items:

  • 1 * ERS-RC01 RPM-CDI Sensor
  • 3 * Heat-Shrinkable Tube
  • 1 * Manual QR Code Card
Package contents of Radiomaster ERS-RC01

Image: Visual representation of the package contents, showing the ERS-RC01 sensor, a Manual QR Code Card, and three Heat-Shrinkable Tubes.

4. Specifications

Item Detail
Product Name ERS-RC01 RPM-CDI Sensor
Operating Voltage 5–8.4V
Operating Current 8mA
Connector Type 3 pin
Supported Ignition CDI gasoline ignition
RPM Range 200–300,000 RPM
Accuracy ±0.1%
Temperature Range –10 ℃ to +85 ℃
Size 28 × 12 × 8mm
Weight 6.0g
Radiomaster ERS-RC01 Specifications Table

Image: Detailed specifications table for the ERS-RC01 RPM-CDI Sensor.

Radiomaster ERS-RC01 Sensor Dimensions

Image: Dimensions of the ERS-RC01 sensor, showing 28mm length, 12mm width, and 8mm height.

Radiomaster ERS-RC01 Sensor Weight

Image: The ERS-RC01 sensor on a scale, indicating a weight of 6.0g.

5. Setup and Installation

5.1 General Connection

The ERS-RC01 sensor connects directly to your gasoline engine's CDI speed output. Ensure a secure connection to prevent signal loss.

Radiomaster ERS-RC01 Sensor Connection Labels

Image: Close-up of the ERS-RC01 sensor showing connection labels: RX, TX, +, and -. These correspond to the CRSF interface for telemetry data.

5.2 Plug-and-Play Compatible Receivers

The following ExpressLRS PWM receivers are designed for plug-and-play compatibility with the ERS-RC01 sensor:

  • ER6 2.4GHz ExpressLRS PWM Receiver
  • ER8 2.4GHz ExpressLRS PWM Receiver
  • ER8G ExpressLRS PWM Receiver
  • ER8GV ExpressLRS PWM Receiver

For these receivers, simply connect the ERS-RC01 sensor to the designated telemetry port (CRSF interface) on the receiver.

5.3 Using with Non-Plug-and-Play PWM ExpressLRS Receivers

Most PWM ExpressLRS receivers are fully compatible with ERS sensors. However, receivers without a dedicated UART port require reconfiguration to support external sensors for telemetry. To enable this, you will need to reassign two PWM output pins as a serial UART (one for TX and one for RX).

This reconfiguration can be done via:

  • The receiver's Web UI (accessed by putting the receiver into WiFi mode).
  • The ExpressLRS LUA script on your radio.

This process enables sensor connectivity while preserving the remaining PWM channels for servos or ESCs. For receivers that only provide standard servo pins, an optional adapter cable is available (sold separately) that converts the sensor’s UART connector to two standard servo plugs (TX and RX).

Radiomaster ERS-RC01 Plug and Play Compatibility and Wiring

Image: Diagram illustrating plug-and-play compatibility with various ExpressLRS receivers. It shows a table indicating which receivers are plug-and-play and which require an adapter. A visual example shows the ERS-RC01 connected to an ER6 receiver.

6. Operation

Once the ERS-RC01 sensor is correctly installed and connected to your ExpressLRS receiver, it will begin monitoring your engine's RPM. The sensor transmits this data in real-time to your compatible EdgeTX radio via the CRSF interface.

To view the RPM data:

  1. Ensure your EdgeTX radio is properly bound to the ExpressLRS receiver.
  2. Navigate to the telemetry screen or sensor display on your EdgeTX radio.
  3. The engine RPM will be displayed, typically in RPM units, with an accuracy of ±0.1%.

The sensor is capable of monitoring RPMs within a range of 200 to 300,000 RPM.

Real-time monitoring of engine RPM data

Image: Illustration of real-time monitoring, showing the ERS-RC01 sensor connected and RPM data (e.g., 15903rpm) displayed on an EdgeTX radio screen.

7. Maintenance

The ERS-RC01 sensor is designed for durability and requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

  • Keep Clean: Periodically inspect the sensor for dirt, dust, or debris. Gently clean with a soft, dry cloth if necessary. Avoid using harsh chemicals or solvents.
  • Check Connections: Ensure all wiring connections remain secure and free from corrosion. Loose connections can lead to intermittent data readings.
  • Environmental Protection: While the sensor operates within a wide temperature range (–10 ℃ to +85 ℃), avoid exposing it to extreme moisture or direct impacts.
  • Heat Shrink Tubes: Utilize the provided heat-shrinkable tubes to protect exposed connections from environmental elements and vibrations.

8. Troubleshooting

No RPM data displayed on radio:
  • Verify all connections between the ERS-RC01 sensor, the ExpressLRS receiver, and the engine's CDI speed output are secure.
  • Ensure your ExpressLRS receiver is properly bound to your EdgeTX radio.
  • If using a non-plug-and-play receiver, confirm that the PWM pins have been correctly reassigned as a serial UART (TX/RX) via the receiver's Web UI or ExpressLRS LUA script.
  • Check the operating voltage supplied to the sensor (5–8.4V).
  • Confirm that your engine's CDI unit has a functional speed output.
Inaccurate RPM readings:
  • Ensure the sensor is correctly positioned and securely attached to the CDI speed output.
  • Check for any electrical interference near the sensor or wiring.
  • Verify the sensor's operating temperature is within the specified range (–10 ℃ to +85 ℃).
Compatibility with specific engines (e.g., Zenoah Pum engines):
  • The ERS-RC01 is designed to support CDI gasoline ignition systems. If your Zenoah Pum engine uses a standard CDI speed output, it should be compatible.
  • Consult your engine's manual to confirm the type of ignition system and the presence of a dedicated RPM output or a suitable point for signal tapping.

9. User Tips

  • Verify CDI Output: Before installation, confirm that your gasoline engine's CDI unit provides a clear and accessible speed output signal for the tachometer.
  • Receiver Configuration: For ExpressLRS receivers that are not natively plug-and-play with external sensors, remember to reconfigure two PWM pins to act as a serial UART (TX/RX) using the receiver's Web UI or the ExpressLRS LUA script. This step is crucial for telemetry data transmission.
  • Cable Management: Use the included heat-shrinkable tubes to protect wiring connections from vibrations and environmental factors, ensuring long-term reliability.
  • Daisy Chaining: Leverage the daisy-chain expansion feature to integrate other ERS telemetry modules (e.g., current sensors, cell voltage sensors) for a more comprehensive data logging and monitoring system.
Linear Daisy Chained Sensors for Scalable Telemetry

Image: Diagram illustrating how multiple ERS sensors, including the ERS-RC01, can be linearly daisy-chained for scalable telemetry, connecting to an ESC, current sensor, and cell voltage sensor.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Radiomaster website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.