Introduction
Thank you for choosing the HOMCOM 3-in-1 Folding Armchair Bed. This versatile piece of furniture is designed to provide comfort and functionality, easily transforming from a stylish armchair to a comfortable recliner or a single bed. Its robust construction and adjustable features make it an ideal addition to any living room, bedroom, or guest space. Please read this manual carefully before assembly and use to ensure safe and optimal performance of your product.
Safety Instructions
- Ensure all parts are present and undamaged before assembly.
- Follow the assembly instructions precisely. Do not overtighten screws.
- Keep children and pets away from the product during assembly.
- Do not exceed the maximum load capacity of 120 kg (264 lbs).
- Place the armchair bed on a flat, stable surface.
- Avoid exposing the product to direct sunlight or extreme temperatures to prevent material degradation.
- Do not stand or jump on the armchair bed.
- Regularly check all fasteners to ensure they remain tight.
Package Contents
Please check the package to ensure all items are included:
- 1 x Folding Armchair Bed unit
- 1 x Cushion
- Assembly Hardware (screws, tools if provided)
- 1 x Instruction Manual (this document)
Specifications
| Feature | Detail |
|---|---|
| Model Number | 839-875V01Gy |
| Color | Grey |
| Material | Faux linen fabric (100% polyester), Foam, Steel, Rubber wood |
| Installation Method | Assembly required |
| Sofa Dimensions (L x W x H) | 90 x 78 x 79 cm (35.4 x 30.7 x 31.1 inches) |
| Bed Dimensions (L x W x H) | 90 x 190 x 25 cm (35.4 x 74.8 x 9.8 inches) |
| Seat Dimensions (L x W x H) | 90 x 62 x 38 cm (35.4 x 24.4 x 15 inches) |
| Backrest Dimensions (L x W) | 90 x 41 cm (35.4 x 16.1 inches) |
| Seat/Backrest Thickness | 11 cm (4.3 inches) |
| Cushion Dimensions (L x W x H) | 60 x 34 x 8 cm (23.6 x 13.4 x 3.1 inches) |
| Maximum Load Capacity | 120 kg (264 lbs) |
| Adjustable Backrest Positions | 6 levels (100°, 115°, 125°, 140°, 160°, 180°) |

Figure 1: Product Dimensions in Chair and Bed Modes
Setup and Assembly
The HOMCOM 3-in-1 Folding Armchair Bed requires some assembly. Please follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches. Verify that all components listed in the "Package Contents" section are present.
- Attach Legs: Identify the wooden legs and the metal support legs. Attach the wooden legs to the designated points on the main armchair frame using the provided screws and tools. Ensure they are securely fastened.
- Attach Metal Support Legs: The metal support legs are typically integrated into the folding mechanism. Ensure they are correctly aligned and can extend and retract smoothly.
- Initial Unfolding: Gently unfold the armchair into its recliner or bed position to ensure all moving parts operate correctly. Refer to the "Operating Instructions" section for detailed guidance on transformation.
- Final Check: Once assembled, ensure all screws are tight and the armchair bed is stable before use.
Operating Instructions
This 3-in-1 armchair bed offers three primary modes: armchair, recliner, and single bed. Follow these instructions to switch between modes and adjust the backrest.
1. Adjusting the Backrest (Chair to Recliner)
The backrest can be adjusted to 6 different positions, from an upright 100° to a fully flat 180°.
- To recline, gently push the backrest forward slightly to disengage the locking mechanism.
- Then, slowly lower the backrest to your desired angle. You will hear clicks as it locks into each of the 6 available positions.
- To bring the backrest back to an upright position, push it all the way forward until it clicks into the highest position, then release it to fall back into the desired upright angle.

Figure 2: Adjustable Backrest Positions

Figure 3: Adjusting the Backrest
2. Transforming to Bed Mode
To convert the armchair into a single bed:
- Ensure the backrest is fully reclined to the 180° flat position.
- Locate the hidden support legs at the front section of the seat. Gently pull the seat forward and unfold these legs to support the extended bed section.
- The armchair will now be fully extended into a single bed.

Figure 4: 3-in-1 Design Transformation
3. Returning to Armchair Mode
To convert the bed back into an armchair:
- Fold the front support legs back into their hidden position.
- Push the extended seat section back towards the main frame until it locks into the armchair position.
- Adjust the backrest to your desired upright position as described in "Adjusting the Backrest".
Maintenance
Proper care will extend the life and appearance of your armchair bed.
Cleaning the Fabric
- Regular Cleaning: Vacuum the fabric regularly using an upholstery attachment to remove dust and debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain. For stubborn stains, use a mild fabric cleaner following the product's instructions. Test on an inconspicuous area first.
- Avoid Harsh Chemicals: Do not use bleach or abrasive cleaners, as these can damage the fabric.
Frame and Legs
- Wipe the steel frame and rubber wood legs with a soft, damp cloth. Dry immediately.
- Avoid using harsh chemicals or abrasive materials on the frame or legs.
- Periodically check all screws and fasteners and tighten them if necessary to maintain stability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Armchair feels unstable or wobbly. | Loose fasteners or uneven placement. | Ensure all screws are tightened. Place the armchair on a flat, level surface. |
| Difficulty adjusting the backrest. | Mechanism might be stiff or misaligned. | Ensure you push the backrest slightly forward before reclining. Apply gentle, even pressure. Check for any obstructions. |
| Difficulty transforming to bed mode. | Front support legs not fully extended or mechanism stuck. | Ensure the backrest is fully flat. Check that the hidden support legs are fully extended and locked into place. Do not force the mechanism. |
| Squeaking noises during use. | Loose joints or friction between metal parts. | Tighten all fasteners. If squeaking persists, a small amount of silicone lubricant can be applied to moving metal joints (avoiding fabric). |
User Tips
No specific user reviews or Q&A were provided for this product. However, general tips for convertible furniture include:
- Smooth Transitions: Always operate the folding and reclining mechanisms slowly and deliberately to prevent damage and ensure smooth transitions between modes.
- Space Consideration: Before transforming to bed mode, ensure you have adequate clear space around the armchair to fully extend it.
- Cushion Placement: The included cushion can be used for lumbar support when in armchair mode or as a pillow when in bed mode.
Warranty and Support
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact the seller directly. If you encounter any issues not covered in this manual or require further assistance, please reach out to HOMCOM customer support or the retailer from whom you purchased the product. Please have your model number (839-875V01Gy) and proof of purchase ready when contacting support.