1. Introduction
Welcome to the ISUDAR T75X Android 14 Car Radio user manual. This guide provides detailed instructions for the installation, operation, and troubleshooting of your new car multimedia system. Designed specifically for the Honda Civic 8th Generation (2006-2012) with manual air conditioning, this unit offers advanced features including Wireless Carplay, Android Auto, GPS navigation, 4G network connectivity, WiFi 6, Bluetooth 5.4, a powerful DSP sound system, and a vibrant QLED display. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
2. Safety Precautions
- For any issues during installation or usage, please contact our after-sales support.
- Installation should be performed under professional guidance, as it involves electronic equipment and automotive accessories that may pose risks such as electric shock, injury, or other hazards if handled by untrained individuals.
- Ensure the vehicle's power is disconnected before installation.
- This product is designed for vehicles with a 12V DC power system only. Do not install it on vehicles with a different power supply, as it may damage the product or cause a fire due to over-voltage.
- Turn off the car and disconnect the positive battery terminal before installation. Insulate all wires properly after installation to prevent short circuits that can lead to product damage or fires.
- Avoid using the car audio system for an extended period after turning off the engine to prevent draining the battery.
- If the product is exposed to water damage or foreign matter while driving, park the vehicle in a safe location, turn off the ignition switch (ACC OFF) immediately, and consult your dealer or customer service. Do not use the product in this condition, as it may result in fire, electric shock, or other failures.
- In case of smoke, strange noises, unusual odors, or any other abnormal signs during normal use, immediately turn off the power and consult your dealer or customer service. Do not use the product in this condition, as it may result in fire, electric shock, or other failures.
- Please place the product out of reach of children to avoid unnecessary harm.
3. Setup & Installation
3.1. Wiring Diagram & Cable Connection
Refer to the diagram below for the general wiring connections. Ensure all cables are securely connected to their respective ports on the car radio and vehicle harness.

The following video demonstrates the cable connection process:
Video: Cable Connection and CANbus Setting Guide
- GPS Antenna: Connect the GPS antenna to the dedicated port on the car radio. It is recommended to install the GPS antenna on the dashboard or below the windshield for optimal signal reception.
- 4G Antenna: Connect the 4G antenna to its designated port.
- WIFI/BT Antenna: Connect the WIFI/BT antenna. This port is crucial for proper WiFi and Bluetooth signal reception.
- RCA Cable: Connect the RCA cable for audio/video input/output as needed.
- Power Cable: Connect the main power cable harness to the car radio.
- CANBUS Connection: If your package includes a CANBUS box, connect the CANBUS port on the power cable to the corresponding socket on the car radio.
3.2. Power Plug Definition
The power connector supply pinout is defined as follows:
| Pin No. | Function | Description | Pin No. | Function | Description |
|---|---|---|---|---|---|
| 1 | GND | Ground | 9 | FR- | Front Right Speaker- |
| 2 | B+ | Battery +12V | 10 | RL- | Rear Left Speaker- |
| 3 | ACC | Accessory | 11 | FR+ | Front Right Speaker+ |
| 4 | ILL | Illumination | 12 | RL+ | Rear Left Speaker+ |
| 5 | BACK UP | Camera Back up | 13 | FL- | Front Left Speaker- |
| 6 | WHEEL1 | Steering Wheel Control 1 | 14 | RR+ | Rear Right Speaker+ |
| 7 | WHEEL 2 | Steering Wheel Control 2 | 15 | FL+ | Front Left Speaker+ |
| 8 | ANT+12V | Antenna Power | 16 | RR- | Rear Right Speaker- |
3.3. Frame Installation Tip
Transfer the snap clip from the original frame to the new one. (Skip if not applicable to your vehicle.)

3.4. CANBUS Setup
Setting the correct CANBUS type allows the car radio to better integrate with the original vehicle information system. This step is only necessary if your car radio includes a CANBUS Box and requires setup. If not, you can skip this step entirely.
- Connect the device to Wi-Fi.
- Go to: Settings > Factory (Code: 123456) > Select models.
- Select: CanBox > Cars for > Models for > Config.
For example, if you purchased a car radio for a Jeep Renegade, and the CANBUS box shows the brand SS (Simple Soft), then choose: 03: Simple Soft > 87: JEEP > 11: 16 Renegade > LowConfig. Other options depend on the vehicle model.
3.5. Reverse Camera Connection & Setting
Proper connection and configuration of the reverse camera are essential for safe operation.
3.5.1. Connection for Original Camera:
Just connect the yellow Port "A" (Reverse Camera Output) to the yellow Port "B" (Reverse Camera Input) as shown in the wiring diagram.
3.5.2. Connection for Aftermarket Reverse Camera (With Canbus):
- Connect the yellow port “B" to the yellow port "C". The Camera red wire connects with the power cable wire “BACK" or "Reverse". (Camera Back UP: The 5th Pin on the “Power Connector" is the brown or pink wire.)
- The red wire connects with red wire. The black wire connects with the Car reversing light negative electrode.
3.5.3. Connection for Aftermarket Reverse Camera (Without Canbus):
- Connect the yellow port "B" to the yellow port "C". The Camera red wire connects with the power cable wire “BACK" or "Reverse". (Camera Back UP: The 5th Pin on the “Power Connector" is the brown or pink wire.)
- The red wire connects with red wire and connects with the Car reversing light positive electrode. The black wire connects with the Car reversing light negative electrode.
3.5.4. Setting the Reverse Camera Display:
Shift the gear into reverse and check if the rearview camera displays a proper image. If the image does not appear correctly, follow these steps:
- Go to: Settings > Reverse > Reversing System selection > Set the correct camera format.
- Engage reverse gear in your car > Tap the car screen > Tap the setting icon > Set the correct camera format.
For original rearview cameras, the "NTSC" format is recommended. For aftermarket rearview cameras, if your camera uses a different format, please select the appropriate option based on its specifications. (If you have installed an AHD camera, the "AHD 1080P-25Hz" format is recommended.)
4. Operating Instructions
4.1. Steering Wheel Control
To configure steering wheel controls:
- Click the Steering Wheel icon to open the settings page.
- Click "START", press the corresponding button on the screen, and then press the physical button on the steering wheel. After learning, the button will be highlighted.
- After setting all the necessary buttons, click “END” to complete and save.
Note: For car radios equipped with CANBUS, the steering wheel control buttons are directly decoded by CANBUS and do not require setting in this application. If your car radio is equipped with CANBUS, but the steering wheel control buttons still do not work after setting the CANBUS type, please contact after-sales support for reset instructions.
4.2. System Settings
4.2.1. Logo Setting:
You can customize your startup image:
- Prepare a 32-bit Bitmap image (BMP, PNG, JPG) with a resolution of 1024*600, 1280*720, or other resolutions depending on your screen.
- Copy the logo image to a USB flash drive.
- Insert the USB flash drive into the USB port of the car radio.
- Click "Settings > Factory (Code:123456) > LOGO Setting”. The logo image in the USB will be displayed at the bottom. Select the image and click "Logo setting".
4.2.2. Animation Boot Logo:
To add a custom animation boot logo:
- Prepare a 32-bit Bitmap animation (Zip format) with a resolution of 1024*600, 1280*720, or other resolutions depending on your screen.
- Copy the compressed animation package to the USB root directory.
- Insert the U-disk into the device USB port.
- Click "Boot Animation > Pull down the status bar and click the "Menu" > An import box will pop up > Click "Import from external storage" and a password box will pop up > Enter the password "Topway". The Animation in the USB will be displayed. Select the zip and click "Confirm".
4.2.3. Radio Setting:
- Adjust Radio Reception Area: Settings > Factory (Code:123456) > Select radio region > Default Radio Area.
- RDS: Settings > Factory (Code:123456) > Config info > RDS > ON/OFF.
4.2.4. Button Color:
Click "Color" > Select the desired physical button color. If you don't have the Color app, click "Settings > Factory (Code:123456) > Config info > Color > ON/OFF”.
4.3. Connectivity Features
4.3.1. Wired & Wireless Carplay:
To use Carplay, click the Tlink5 APK icon.
- Wired Connection: Turn off Wi-Fi and Bluetooth on your phone. Use a 4-pin USB cable to connect.
- Wireless Connection:
- Turn on Wi-Fi and Bluetooth on your iPhone.
- Find the stereo's Bluetooth (name: CarKit_blink, PIN: 0000) and connect.
- On your iPhone, accept the Bluetooth pairing request and allow contacts/favorites sync. Confirm to use CarPlay with "ZLINK".
- Click the Tlink5 APK. The car stereo will display "Connecting, please wait..." and then enter the CarPlay page. After a successful connection, it will automatically switch to Wi-Fi.
Tip: Long press the bottom left lower corner menu key to activate Siri. Click the "Car" icon to return to the car stereo's app interface.
4.3.2. Wired & Wireless Android Auto:
To use Android Auto, click the Tlink5 APK icon.
- Wired Connection: Turn off Wi-Fi and Bluetooth on your phone. Use a 4-pin USB cable to connect. Turn on the Android Auto app on your phone.
- Wireless Connection:
- Go to Play Store and download the Android Auto App on your phone.
- Turn on Wi-Fi and Bluetooth on your phone.
- Find the stereo's Bluetooth (name: CarKit_blink, PIN: 0000) and connect.
- Turn on the Android Auto app on your phone after connecting the Bluetooth successfully.
Notes:
- Ensure your phone supports Google services and wireless Android Auto.
- Apple CarPlay & Android Auto do not support playing video apps like YouTube due to safety considerations while driving.
- After accessing Carplay & Android Auto, if you want to exit and play music using Bluetooth, please turn off Wi-Fi instead of disconnecting Bluetooth.
4.3.3. Mirror Link:
To use Mirror Link, click the ZLINK APK icon and switch to the Mirror Link page by pressing the icon.
- iPhone AirPlay Connection:
- On the car radio, tap the iPhone icon to activate hotspot connection mode. Connect the car radio to your iPhone's personal hotspot.
- On your iPhone, open “Control Center”, tap “Screen Mirroring”, and select "zj-airplay”. Once connected, wireless screen mirroring will begin successfully.
- Android Link Connection:
- Tap the Android icon and scan the QR code to download the app.
- Turn on your phone's Bluetooth and connect it to the car radio. After connection, turn off your phone's Wi-Fi and enable the mobile hotspot.
- Connect the car radio to your phone's hotspot. Select Wireless Connection, then enter the setup wizard.
- On your phone, tap Start Screen Mirroring. The screen will then be mirrored successfully.
4.4. Additional Features
- GPS and GLONASS Navigation: Includes GPS antenna, supports both GPS and GLONASS. Supports online and offline navigation apps like Google Maps, Yandex, Waze, IGO.
- Split Screen & Picture-in-Picture (PIP): (For T10C, T58M, T58B, T75X) The screen can be divided into two parts, allowing simultaneous viewing of navigation and music. Video can also be displayed in Picture-in-Picture mode.
- 4G Network: (For T75X & Q74X) Features a 4G SIM card slot and antenna for stable and fast network connectivity. Supports Google Play for app downloads (Spotify, YouTube, Netflix, etc.) and online music, video, radio, and navigation.
- Faster WiFi 6: New WiFi module supports 2.4G and 5GHz, with a maximum speed of up to 9.6 Gbps.
- Bluetooth 5.4 Handfree: Built-in Bluetooth 5.4 for stable connection, longer distance, and higher transmission efficiency. Supports mobile phone hands-free calls, music streaming, phonebook, dial key, and calling history. Features automatic connection after the initial pairing.
- DSP Sound System: Includes a built-in Digital Signal Processor with 32 bands EQ setting for customized music styles. Features sound field adjustment for immersive audio and subwoofer output adjustment to enhance bass and reduce driving fatigue.
- QLED Display: 9-inch QLED screen with 1280*720P resolution, offering higher pixels, clearer, more delicate display quality, and vivid, richer colors for a wonderful visual experience.
- USB DVR Input: Supports ADAS USB 1080P DVR input, displaying obstacle distance and providing alarms. (DVR not included).
- Rear Camera Support: Supports 1080p & 720p AHD/RCA rear view cameras with parking lines.
- Online Theme Launchers: More than 60 sets of online theme launchers available.
- Network Radio: Provides access to radio stations from all over the world in different languages.
- Online Voice Control: Professional version voice control with AI assistant for relaxed driving. Supports online voice commands (e.g., "Go to Airport", "Play Beat It on Spotify"). (Note: Activated code may be required, contact support).
5. Specifications
The ISUDAR T75X series car radio offers various configurations. Below are the general specifications, with a detailed comparison table for different models:
| Attribute | Value (T75X) |
|---|---|
| Brand Name | ISUDAR |
| Chipset | UIS7865 |
| Processor Type | 8 core (Cortex 2*A75+6*A55 @2.2GHz+6*A55@1.8GHz) |
| Operating System | Android 14 |
| RAM | 8G (LPDDR4X) |
| ROM | 128G (eMMC) |
| Display Size | 9" QLED |
| Resolution | 1280*720P |
| Out Power | 4*48W |
| Voltage | 12 V |
| Max External Memory | 256G |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| Special Features | Built-In Speaker/Microphone, WiFi function, Support 3G/4G Network, Built-in GPS, Charger, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control |
| OSD Language | Multi-language support (Chinese, English, Arabic, German, French, Spanish, etc.) |
| Certification | CE |
| On-line Weather | Support |
| On-line Theme | Optional |
| Carplay & Android Auto | Support |
| Subwoofer | Support |
| Microphone | Built-in |
5.1. Model Comparison Table
Refer to the table below for a comparison of features across different ISUDAR models:

6. Troubleshooting (FAQ)
- Q: Why are my steering wheel controls and rear-view camera functions not working properly?
- A: You may need to reconfigure the Canbus type. Please contact our after-sales support to receive guidance on the specific Canbus settings for your vehicle model.
- Q: Black screen / can't power on.
- A:
- Press the RST button on the car stereo. This button is typically used to reset the system and may help resolve any temporary issues.
- Check if the car stereo is receiving a stable DC12V voltage. Ensure the power source is providing the correct voltage to the stereo.
- Inspect the car stereo fuse to see if it is burnt out. If the fuse is blown, replace it with a new one of the same rating.
- Reconnect the BATT + / ACC / GND wires of the car stereo to the corresponding BATT + / ACC / GND wires of the original car wiring. Ensure the connections are secure and properly aligned.
- Q: My car has an amplifier system. Why is there no sound after installation?
- A:
- Please ensure the power cable provided is compatible with your car. If not, contact our after-sales support for a compatible power cable.
- Connect the AUX cable of the power cable to the AUX cable of the RCA cable. (AUX-L-IN = AUDIO OUT L; AUX-R-IN = AUDIO OUT R; AUX L = AUX IN L; AUX R = AUX IN R).
- Make sure the power cable provided includes a separate blue AMP Control wire, which should be connected to the blue "AMP CONT" wire on the RCA harness.
- Turn on the amplifier switch in the settings: The amplifier and fan share a power supply. Therefore, please enable "Always on" in the Fan app.
- Q: Why can't I play videos while driving?
- A: For safe driving, video playback is disabled. You need to set it to open as follows: Settings > Factory (Code:8888) > Brake setting > Close.
- Q: Why does the music stop when reversing?
- A: For safety reasons, you need to turn it on as follows: Settings > Reverse > Reversing volume control, and adjust the volume to your desired level.
- Q: How to set up automatic connection to CarPlay after connecting Bluetooth?
- A: Settings > General > Application self start > Tlink5.
- Q: How to change between Celsius and Fahrenheit units?
- A: First, connect your car stereo to your phone's hotspot or WiFi. Then, open the weather app. Click the gear icon in the top right corner and select your preferred temperature unit. To switch the air conditioning temperature unit: Settings > Original > TEMP norm > Fahrenheit/Centigrade > confirm.
- Q: How to change the speed unit?
- A: Please follow the path below to modify the settings: Click the "Theme" APP icon > Click the gear icon in the upper right corner > Plugin > Speed unit.
- Q: Why is the time or time zone not updating automatically?
- A: Follow this path to set it: Settings > System > Date & Time, connect your car stereo to your phone's hotspot or WiFi and then open the "Set time automatically".
- Q: Why is my weather information and location not updated?
- A: You need to connect the car stereo to your mobile phone hotspot or WiFi, and the weather information and location will be updated online.
- Q: The touch screen is not sensitive or the touch position is wrong.
- A: Find a wired mouse and connect it to the USB port, then use the mouse cursor to click the following path to enter the settings: Settings > Factory (Code:123456) > Touch area key > POSITION. Then select "CALIBRATION", last you need to click the screen position with your finger instead of clicking the mouse.
- Q: How to use the picture-in-picture function?
- A: Settings > General > Video suspension window > ON.
- Q: If I don't have a factory-installed rearview camera and don't want the reversing image to be displayed when reversing, how do I turn it off?
- A: Settings > Factory (Code: 123456) > Reverse Mode > Prohibit reversing.
- Q: How to change the language?
- A: Settings > More > System > Languages > System Languages.
7. User Tips
- For optimal GPS and 4G signal, ensure antennas are placed in clear, unobstructed locations, such as on the dashboard or below the windshield.
- Regularly check for software updates to ensure your device has the latest features and performance improvements.
- When experiencing connectivity issues with Carplay or Android Auto, try toggling Wi-Fi and Bluetooth on your phone and the car radio.
- If you encounter any persistent issues, a factory reset (Settings > Factory, code 123456) can often resolve software glitches, but remember to back up any important settings or data first.
8. Support & Contact
For any questions, technical support, or after-sales service, please contact ISUDAR support:
- Email: xyl-supports@aliyun.com
- Manufacturer: Shenzhenshi Xinyingli Technology CO., Ltd. Room 402, Building A5, Third Industrial Zone, Huaide Community, Fuyong Street, Baoan District, 518103, Shenzhen, China.
ISUDAR is committed to providing high-quality products and excellent customer service. Your satisfaction is our priority.