1. Introduction
Thank you for choosing the SENSE S10 10 Channel RC Transmitter. This high-quality digital proportional radio system is designed to provide precise and reliable control for your RC model simulation cars and other compatible vehicles. Featuring a multi-function color screen, the S10 offers extensive customization and real-time data display to enhance your remote control experience.
Package Contents
Please inspect the package contents carefully. If any items are missing or damaged, contact your retailer.
- SENSE S10 10 Channel RC Transmitter
- SENSE Receiver
- Grip Cover
- USB Charging/Data Cable
- Wrist Strap
- User Manual (this document)

2. Specifications
| Feature | Detail |
|---|---|
| Model Number | S10 |
| Channels | 10 Channels |
| Display | Multi-function Color Screen |
| Power Source | Electric (Batteries not included) |
| Recommended Age | 14+ years |
| Usage | Vehicles & Remote Control Toys (Cars) |
| Certification | CE |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 30 cm x 20 cm x 20 cm |
| Package Weight | 0.6 kg |
3. Initial Setup
3.1 Transmitter Battery Installation
The SENSE S10 transmitter requires batteries for operation (not included). Locate the battery compartment on the underside of the transmitter handle. Open the cover, insert the recommended batteries (e.g., 4x AA batteries or a compatible LiPo pack, refer to the label inside the compartment for exact type and polarity), and close the cover securely.

3.2 Receiver Connection
Connect the receiver to your RC vehicle's Electronic Speed Controller (ESC) and servos. Ensure correct polarity for all connections. The receiver typically has multiple ports for channels (CH1, CH2, etc.) and a dedicated port for battery/power (BATT/VCC).
- Connect the ESC to Channel 2 (throttle).
- Connect the steering servo to Channel 1 (steering).
- Connect other servos or accessories to available channels (CH3-CH10) as required by your model.
- Ensure the receiver is securely mounted in your vehicle.

3.3 Binding the Transmitter and Receiver
To establish communication between the transmitter and receiver, a binding process is required. Follow these general steps:
- Ensure the transmitter is OFF.
- Connect a bind plug (if supplied with your receiver) to the BIND/VCC port on the receiver.
- Power on your RC vehicle (which powers the receiver). The receiver's LED should flash, indicating it's in bind mode.
- Turn on the SENSE S10 transmitter. Navigate to the "BIND" menu option on the color screen (refer to Section 4.2 for menu navigation).
- Select the bind option. The transmitter and receiver should now bind. The receiver's LED will turn solid when binding is successful.
- Turn off the vehicle and then the transmitter. Remove the bind plug from the receiver.
- Power on the transmitter first, then the vehicle. Test controls to ensure proper operation.
4. Operation
4.1 Basic Controls
- Steering Wheel: Controls the left/right direction of your vehicle.
- Throttle Trigger: Pull to accelerate forward, push to brake/reverse.
- Trim Levers/Buttons: Used for fine-tuning steering and throttle neutral positions.
- Auxiliary Switches/Knobs: Control additional channels (e.g., lights, gear shifts, winches) as configured.

4.2 Color Screen and Menu Navigation
The SENSE S10 features a vibrant color screen for easy access to settings and real-time telemetry. Use the buttons adjacent to the screen to navigate through menus and adjust parameters.

Common menu options include:
- MODEL: Select and manage different vehicle profiles.
- BIND: Initiate the binding process with a receiver.
- REVERSE: Change the direction of a servo's movement.
- EPA (End Point Adjustment): Adjust the maximum travel limits for each servo.
- DR (Dual Rate): Adjust the sensitivity of steering and throttle.
- TRIM: Electronically fine-tune the neutral position of servos.
- ABS (Anti-lock Braking System): Simulate ABS for improved braking control.
- CURVE: Customize the response curve of channels for non-linear control.
- MIX: Set up custom mixing functions between channels.
- FAILSAFE: Configure the receiver's response in case of signal loss (e.g., neutral throttle, slight brake).
- TIMER: Set up timers for race laps or battery monitoring.
- SYSTEM: Access general system settings, calibration, and firmware updates.

Refer to the on-screen prompts and the full digital manual (if available) for detailed instructions on each function.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the transmitter and receiver. Avoid using solvents or harsh chemicals.
- Storage: Store the transmitter and receiver in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods.
- Firmware: Check the manufacturer's website periodically for firmware updates to ensure optimal performance and access to new features. Use the provided USB cable for updates.
6. Troubleshooting
- No Power: Ensure batteries are correctly installed and charged. Check the power switch.
- No Control/Signal Loss: Re-bind the transmitter and receiver. Check for interference sources. Ensure the receiver antenna is properly positioned and not damaged.
- Erratic Servo Movement: Check all wiring connections for security and correct polarity. Ensure servos are not binding mechanically.
- Screen Issues: If the screen is unresponsive or displays errors, try restarting the transmitter. If issues persist, contact support.
7. User Tips
- Always turn on the transmitter BEFORE powering on your RC vehicle, and turn off the vehicle BEFORE turning off the transmitter. This prevents accidental runaways.
- Regularly check battery levels on both the transmitter and vehicle to avoid unexpected power loss during operation.
- Experiment with EPA and Dual Rate settings to fine-tune the control response to your driving style and vehicle type.
- Utilize the model memory function to save settings for different vehicles, making it easy to switch between them without reconfiguring.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided by your retailer or visit the official SENSE website. Keep your proof of purchase for warranty claims.