1. Introduction
The GL-iNET Brume 3 (GL-MT5000) is a compact, high-performance wired security gateway designed for home users and small businesses. It integrates enterprise-grade software capabilities to provide advanced VPN functionality, secure remote access, and robust network protection. With speeds up to 1,100 Mbps for VPN connections, three 2.5GbE ports, and flexible multi-WAN configuration, the Brume 3 ensures fast, reliable, and secure wired networking. Its modern, space-saving design and convenient Type-C power input offer a balanced combination of performance, security, and versatility.
Image: GL-iNET Brume 3 (GL-MT5000) highlighting key features.
2. Package Contents
Verify that all items are present in your package:
- 1 x Brume 3 (GL-MT5000) Gateway
- 1 x Power Adapter
- 1 x Ethernet Cable
- 1 x User Manual
- 1 x Warranty Card
- Converters (Base on your shipping countries)
Video: Unboxing Brume 3 (GL-MT5000) showing package contents.
3. Product Overview
3.1 Device Layout
Image: Rear view of Brume 3 with labeled ports.
- USB-C Power Port (POWER 5V-3A): Connect the provided power adapter here.
- WAN 2.5G Port: Connect to your internet source (modem/router).
- LAN 1 2.5G Port: Connect to local network devices. Can also be configured as a WAN port for Multi-WAN setups.
- LAN 2 2.5G Port: Connect to local network devices.
- USB-C Data Port (DATA USB 3.0): For connecting external storage or other USB devices.
- Reset Button: Used for resetting network settings or factory reset.
Image: Side view of Brume 3 showing the reset button.
3.2 LED Indicators
Image: Top view of Brume 3 with LED indicators.
- System LED (White / Blue): Indicates device status.
- VPN Status LED (White): Indicates VPN connection status.
4. Initial Setup
- Connect Power: Plug the provided USB-C power adapter into the POWER port of the Brume 3 and then into a power outlet.
- Connect to Internet: Connect an Ethernet cable from your modem or existing router to the WAN 2.5G port on the Brume 3.
- Connect Devices: Connect your computer or other network devices to the LAN 1 2.5G or LAN 2 2.5G ports using Ethernet cables.
- Access Admin Panel: Once powered on, wait for the System LED to stabilize. Open a web browser on a connected device and navigate to the default gateway IP address (usually
192.168.8.1). Follow the on-screen instructions to set up your administrator password and configure basic network settings.
Image: Brume 3 in a typical desktop setup.
5. Operating Instructions
The Brume 3 runs on a customized OpenWrt system with an intuitive web interface. This section covers its primary functionalities.
5.1 VPN Functionality
The Brume 3 supports high-speed VPN connections, including WireGuard® (up to 1,100 Mbps) and OpenVPN (up to 1,000 Mbps via Data Channel Offload). It can act as both a VPN client and server.
- VPN Client: Connect your entire network to a VPN service provider.
- VPN Server: Create a secure tunnel to access your home network remotely.
- VPN Obfuscation: This feature masks VPN traffic to appear as normal encrypted data (e.g., HTTPS), helping to bypass network restrictions and reduce traffic identification in environments with strict network controls.
Image: VPN Obfuscation diagram.
5.2 Multi-WAN Configuration
The Brume 3 features three 2.5GbE ports, allowing for flexible WAN/LAN configurations, including dual-WAN load balancing and failover. This enhances network reliability by providing redundancy and improved bandwidth utilization.
- Dual ISP Line: Connect two different internet service providers for redundancy or combined bandwidth.
- USB Tethering: Use a 4G/5G USB modem or smartphone tethering as an additional WAN source for failover.
Image: Multi-WAN Failover setup with dual ISP and USB tethering.
5.3 Deep Packet Inspection (DPI) & Traffic Control
The built-in DPI provides intelligent traffic visibility and content protection.
- Traffic Monitoring: Monitor network traffic through an intuitive visual dashboard. View real-time and historical data (up to 7 days) to identify high-usage applications or abnormal activity.
- Content Protection: Automatically identify and block malicious or inappropriate websites. Custom blocking rules can be set by application, domain, or IP.
- Smart Queue Management (SQM): Reduces bufferbloat and maintains low latency during network congestion. Configure basic SQM controls to balance latency and throughput.
- Quality of Service (QoS): Prioritize latency-sensitive traffic, such as video conferencing and online gaming, to ensure smooth performance even under heavy network load.
Image: DPI-based traffic monitoring dashboard.
5.4 OpenWrt Flexibility
The Brume 3 offers full OpenWrt compatibility, allowing advanced users to access open-source packages and custom scripts for deep flexibility and long-term extensibility.
6. Maintenance
- Firmware Updates: Regularly check for and install firmware updates from the GL.iNet official website to ensure optimal performance, security, and access to new features.
- Physical Care: Keep the device in a well-ventilated area, away from direct sunlight and moisture. Clean with a soft, dry cloth.
7. Troubleshooting
7.1 Reset Button Functions
The reset button on the side of the device has two functions:
- Restore Network Settings: Press and hold the reset button for more than 3 seconds but less than 8 seconds to restore network settings to the device's initial state.
- Restore Factory Settings: Press and hold the reset button for 8 seconds or longer to restore the device to its factory default settings.
7.2 Common Issues
- No Remote VPN Access (WireGuard Server): If you are using the Brume 3 as a WireGuard server and cannot access it remotely, ensure you have a public IPv4 address from your ISP. ISPs using CGNAT (Carrier-Grade Network Address Translation) or private IPs may prevent port forwarding, making direct remote access difficult without additional services like a VPS or mesh VPN.
- Slow VPN Connection: Ensure your internet connection speed is adequate. For optimal VPN performance, consider using WireGuard over OpenVPN if supported by your VPN provider, as it generally offers higher speeds.
- Network Instability: Check all Ethernet cable connections. If using Multi-WAN, ensure both internet sources are stable.
8. User Tips
- For Tailscale exit node functionality, update to the latest firmware (e.g., v4.9) and consider updating the OpenWrt version via available GL.iNet scripts.
- The web interface is generally clear and simple, offering many functionalities and options for customization.
- The Brume 3 is noted for its fast VPN connection speeds, especially when compared to previous models.
9. Specifications
| Feature | Detail |
|---|---|
| Model | GL-MT5000 (Brume 3) |
| CPU | MediaTek, Quad-core @2.0GHz |
| Memory / Storage | DDR4 1GB / eMMC 8GB |
| Ethernet Speed | WAN/LAN Port: 10/100/1000/2500Mbps |
| WAN Ports | 1 x 2.5G WAN, 1 x 2.5G WAN/LAN |
| LAN Ports | 1 x 2.5G LAN, 1 x 2.5G WAN/LAN |
| USB Port | 1 x USB3.0 Type-C (Max. output: 5V/2A) |
| Power Input | USB Type-C (5V/3A) |
| Power Consumption | <5W |
| Operating Temperature | 0 ~ 40°C (32 ~ 104°F) |
| Storage Temperature | -20 ~ 70°C (-4 ~ 158°F) |
| Operating Humidity | 5% ~ 95%, non-condensing |
| Storage Humidity | 5% ~ 95%, non-condensing |
| Dimension / Weight | 75 x 92 x 25mm / 148g |
| Operating System | OpenWrt 21.02 (Kernel version 5.4.281) |
| Network Mode | Routing |
| Ethernet Dialing Mode | DHCP, Static, PPPoE |
| Firewall Function | Firewall, Port Forwarding, Port Management (Open Port), DMZ |
| VPN Support | OpenVPN (Client & Server, up to 1,000Mbps, DCO supported), WireGuard (Client & Server, up to 1,100Mbps) |
| System Functions | Restart, Restore Factory Settings, VPN Obfuscation, Content Protection (DPI), Data Statistics (DPI), SQM, QoS, Multi-WAN, Load-balancing, Failover, Cloud Remote Management |
10. Certifications
- CE
- UKCA
- RoHS
- WEEE
- FCC
- CA65
- IC
- RCM
- VCCI
11. Warranty and Support
For warranty information and technical support, please refer to the official GL.iNet resources:
- Website: www.gl-inet.com
- Email: sales@gl-inet.com
- Manufacturer: GL Technologies (Hong Kong) Limited
- Address: Unit 601, Building 5W, Hong Kong Science Park, Shatin, N.T., Hong Kong
Copyright © 2026 GL Technologies (Hong Kong) Limited. All rights reserved.