1. Product Overview
The MEKEDE MN-X Series Car Multimedia Player is an intelligent Android 14 system designed to upgrade your Mercedes Benz W212's infotainment experience. It features a high-definition touch screen, wireless CarPlay, Android Auto, GPS navigation, Bluetooth, and 4G/WiFi connectivity.
Key Features:
- Android 14 Operating System
- High-definition capacitive touch screen (1920x720 or 1280x480 resolution)
- 8-Core or Quad-Core processor options
- RAM options: 2GB, 4GB, 6GB, 12GB
- ROM options: 32GB, 64GB, 128GB, 512GB
- Built-in Wireless CarPlay and Android Auto
- Integrated GPS Navigation
- Built-in Bluetooth for hands-free calling and music streaming
- DSP (Digital Sound Processor) with 32 EQ adjustments (available on select models)
- 4G LTE and WiFi connectivity
- Support for original car functions (steering wheel control, iDrive, car info)
- Dual system free switching (original car system + Android system)
2. Package Contents
Please verify that all items listed below are included in your package:

Image: MN-X Series Package Contents
- Main Unit (Screen)
- Packaging Box
- Power Cable
- GPS Antenna
- 4G Antenna
- Microphone (MIC)
- Speaker
- Audio adapter box (only for NTG 5.0)
3. Setup and Installation
3.1 Compatibility Check
Before installation, it is crucial to confirm your car's system type. The MEKEDE MN-X Series is compatible with Mercedes Benz W212 models from 2005-2015. Please identify if your car uses NTG 4.0, NTG 4.5, or NTG 5.0. If unsure, remove the original monitor and check the LVDS connection as shown in the image below.

Image: Tips for checking car system (NTG 4.0, 4.5, 5.0) and LVDS connection.
3.2 Audio Transmission Note
For NTG 4.0 and NTG 4.5 systems, sound is transmitted via AUX or AMI. For NTG 5.0, sound is transmitted via USB. If your car does not have AUX or AMI ports, you may need an FM transmitter to produce audio. However, the sound quality with an FM transmitter will not be as good as direct AUX or AMI connection. Please consider this before proceeding with the installation.

Image: Attention regarding AUX/AMI audio transmission and FM transmitter alternative.
An optional AMI AUX cable is available if needed:

Image: AMI AUX cable (optional).
3.3 Installation Process
The MEKEDE MN-X Series is designed for plug-and-play installation, requiring no external box. However, due to the complexity of car electronics, it is highly recommended to have the product installed by a professional at a car service store to prevent damage to the device or vehicle.

Image: Before and After installation in a Mercedes Benz W212.
The unit supports all original car functions, including iDrive, steering wheel control, and car information display. It also supports the original radio, built-in Bluetooth, original rear view camera, and parking trajectory/radar. The system automatically switches to AUX when needed and allows switching back to the original screen and functions.
4. Operating Instructions
4.1 Main Menu and User Interface
The Android 14 system features a newly upgraded and optimized user interface designed for ease of use while driving. You can select from various main menu styles to personalize your experience.

Image: MN-X series with Android 13/14 system overview and main menu styles.
4.2 Dual System Switching
The device supports seamless switching between the original car system and the Android system. This allows you to retain all original functionalities while enjoying the advanced features of the Android unit.

Image: Dual system free switching (original car system + Android system).

Image: Dual system switching interface.
4.3 Wireless CarPlay and Android Auto
The multimedia player comes with built-in Wireless CarPlay and Android Auto, eliminating the need for additional accessories. Follow these steps to connect:

Image: Car-Play and Android Auto connection steps.
4.4 Bluetooth Functionality
The built-in smart Bluetooth system supports mobile phone pairing, hands-free dialing, and steering wheel button control for safe communication while driving. You can also stream BT music and sync contacts.

Image: Built-in smart Bluetooth system features.
4.5 GPS Navigation and Split Screen
Utilize the built-in global positioning system for omni-directional map display, real-time traffic conditions, and rapid, accurate positioning. The split-screen function allows you to run two applications simultaneously, such as navigation and media playback.

Image: GPS Navigation, Split Screen, and Mirror Link support.
4.6 4G LTE and WiFi Connectivity
Stay connected on the go with the built-in 4G modules and WiFi. This allows you to access cellular data networks without needing to use your phone's hotspot.

Image: Built-in 4G LTE and WiFi connectivity.
4.7 Dashboard Information Display
The unit can display essential car information such as speed, fuel level, oil pressure, and safety warnings directly on the dashboard, enhancing driving awareness.

Image: Dashboard information display with speed, fuel, oil pressure, and safety warnings.
5. Maintenance and Customization
5.1 DSP 32 EQ Adjustments
For optimal audio experience, the powerful DSP chip supports 32 equalizer adjustments, giving you precise control over various audio frequencies.

Image: DSP 32 EQ adjustments interface.
6. Troubleshooting and Advanced Features
6.1 OBD II Support
The unit supports OBD II (On-Board Diagnostics), allowing you to diagnose your car's status anytime. With an optional OBDII device, you can monitor real-time data and retrieve fault codes from your vehicle's computer.

Image: Support OBD II (On-board diagnostics).
6.2 TPMS Support
After correctly installing the optional TPMS (Tire Pressure Monitoring System) sensors in your car, the unit will automatically monitor tire pressure and temperature, providing real-time statistics to the receiver.

Image: Support TPMS (Tire Pressure Monitoring System).

Image: TPMS sensor installation and monitoring.
6.3 ADAS DVR (Anti-collision Warning Driving Recorder)
Enhance driving safety with the optional ADAS DVR. This feature provides front vehicle distance prediction, anti-collision warnings, and lane departure warnings.

Image: ADAS DVR (Anti-collision warning driving recorder).
6.4 AHD Reversing Video
The unit supports AHD rear-view video, offering clearer picture quality compared to ordinary cameras for improved reversing safety.

Image: AHD Reversing Video display.
7. Specifications
7.1 General Specifications
| Attribute | Value |
|---|---|
| Brand Name | MEKEDE |
| Operating System | Android 14 |
| Din | Double Din |
| RAM | 12G (various options available) |
| ROM | 128G (various options available) |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 3kg |
| Item Size | 10.25 inch, 12.3 inch |
| Max External Memory | 128G |
| Interface | plug and play |
| Tuner Type | FM/AM |
| Built-in DVD Player | No |
| Built-in CD player | No |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| TF/Micro SD Slot | 0 |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support (e.g., English, German, French, Spanish, Russian, etc.) |
| Certification | CE |
| Origin | Mainland China |
7.2 Screen Resolution
The unit offers different screen resolutions based on the display size:
- 10.25 Inch Screen resolution: 1280*480
- 12.3 Inch Screen resolution: 1920*720

Image: High-definition capacitive touch screen with 1920x720 resolution.
7.3 Physical Dimensions
The physical dimensions vary between the 10.25-inch and 12.5-inch models. Please refer to the diagram for detailed measurements.

Image: Comparison of 10.25-inch vs 12.5-inch screen sizes and dimensions.
7.4 Model Variants
The MN-X series offers different configurations:
- MNX: Android 14 + IPS Screen + Quad Core + 2GRAM + 32GROM + Split Screen + Built-in WIFI + 1080P Video Play + Support Steering wheel controls + Built-in Carplay + Android Auto
- MNXA: Android 14 + IPS Screen + Eight Core + 4GRAM + 64GROM + 32EQ DSP + Split Screen + Built-in WIFI + 1080P Video Play + 4K + Support Steering wheel controls + 4G LTE (With SIM card slot) + Built-in Carplay + Android Auto + Support voice control (Optional)
- MNXB: Android 14 + IPS Screen + Eight Core + 6GRAM + 128GROM + Split Screen + Built-in WIFI + 1080P Video Play + 4K + Support Steering wheel controls + 32EQ DSP + 4G LTE (With SIM card slot) + Built-in Carplay + Android Auto + Support voice control (Optional)
8. Warranty and Support
8.1 Product Warranty
All MEKEDE products come with a 1-year factory warranty (accessories not included). We strive to provide continuous software updates for firmware, UI, and GPS navigation maps for free to enhance your experience.
Additionally, if the product experiences a problem within 365 days after receipt confirmation, MEKEDE supports free return and refund within 15 days, or a direct replacement of the new machine. Please contact customer service to communicate before initiating any return or replacement.

Image: 365 Days free replacement warranty terms and conditions.
8.2 Customer Support
For any questions or concerns regarding the device, please contact MEKEDE customer service. Most issues can be resolved through proper communication and troubleshooting.
If you have any questions, please contact our business manager, JACK.
9. User Tips
This section is typically populated with helpful hints and advice based on user reviews and frequently asked questions. As no specific reviews or Q&A data were provided for this product, this section is currently empty.