SZSINOCAM QW6 Dual Lens Solar Security Camera

Contents

SZSINOCAM WiFi 3MP Dual Lens Solar Security Camera User Manual

Model: QW6 Dual Lens Solar Security Camera

1. Product Overview

The SZSINOCAM WiFi 3MP Dual Lens Solar Security Camera is designed for outdoor surveillance in private residential estates, farms, and gardens. It offers real-time video, event detection, and recording functions via local applications, cloud services, or SD card storage. This camera is specifically designed for environments without power or network cables, utilizing solar power for continuous operation.

Key Features:

  • Dual Lens: Provides enhanced viewing capabilities.
  • 3MP High Definition: Captures clear and detailed images.
  • Solar Powered: Equipped with a 5W solar panel and built-in rechargeable battery for autonomous operation.
  • 2.4GHz WiFi Connectivity: Supports IEEE 802.11 b/g/n/ax (Wi-Fi 6) for wireless connection.
  • IP66 Water Resistant: Designed for outdoor use in various weather conditions.
  • Full Color Night Vision: Offers clear visibility even in low-light conditions.
  • Human Detection: AI functions for accurate human detection, reducing false alarms.
  • 360° Panoramic View: Pan and Tilt movement range of 0°-360° for comprehensive coverage.
  • Two-Way Audio: Enables communication through the camera.
  • Storage Options: Supports cloud storage (subscription needed) and SD card storage (not included, up to 256GB).

Product Components:

Project Quantity Notes
Camera 1 Keep clean; Do not use for observing in private areas.
Solar panels 1 Must be installed in a location that receives at least five hours of sunlight per day.
Camera mounting plate 1
Solar panel mounting brackets 1
Materials Included DOC, printed instructions, installation stickers
Fixed configuration Included Screws/plastic plugs

2. Safety and Compliance Information

FCC Compliance Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement:

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operate in conjunction with any other antenna or transmitter.

Product Usage Guidelines:

  • Use only within the specified operating temperature range: -10°C to 60°C, operating humidity <90%, IP66 rating, and DC 5V=2A.
  • Install only in locations where the user has the right to conduct surveillance. Avoid use in public areas, neighboring properties, and spaces where people have a reasonable expectation of privacy.
  • Do not use this product as the sole means of fire detection, life safety, medical monitoring, emergency response, access control, or protection of high-risk assets.
  • Do not modify the product, firmware, antenna, power supply, or installation system.
  • Do not use facial recognition, audio recording, or other analytical features unless they comply with the principles of lawfulness, necessity, and transparency and are configured correctly.

Warning – No Guarantee of Security: This product can assist with surveillance but cannot prevent intrusions, injuries, or losses. Network, power, service, or storage failures may delay or prevent alerts and recordings. Maintain appropriate physical security measures and test the system regularly.

Electrical and Power Safety:

  • This product is not supplied with a power adaptor; users must use an adaptor that is certified to EU standards (EN 62368-1).
  • The mains plug or appliance coupler must remain readily accessible where it is used as the disconnect device.
  • Do not use damaged cables, connectors, adapters or sockets. Disconnect power before cleaning, moving or servicing.
  • Keep indoor-only power supplies and connections dry. Do not touch them with wet hands.
  • Do not connect a passive PoE injector unless the product specification expressly permits it. Passive PoE can damage the product and create a hazard.

Installation and Mechanical Safety:

  • Use the specified fasteners for the mounting surface. Check for concealed cables and pipes before drilling.
  • Install overhead or outdoor products so that the mount, safety restraint and cable entries withstand expected loads and weather.
  • Route cables to prevent trips, crushing, sharp bends, water tracking and access by children or pets.
  • Keep small parts, protective films and packaging away from children. They may present choking or suffocation hazards.
  • Do not place the product on an unstable surface or near heat sources, flames, corrosive chemicals or strong magnetic fields.
  • This equipment shall be installed by a skilled person. If the equipment is not provided with an internal all-pole mains disconnect device, an appropriate all-pole disconnect device complying with Annex L of EN IEC 62368-1 shall be incorporated into the building installation. The disconnect device shall be located close to the equipment and shall be readily accessible.
  • This equipment may receive power from more than one source. Disconnect all power sources before installation or servicing. Disconnecting only one power source may not fully de-energize the equipment.

Thermal, Optical and Environmental Safety:

  • The enclosure may become warm during normal operation. Maintain ventilation and do not cover the product.
  • Do not stare into infrared LEDs at close range. Install so that emitters are not directed at eyes at short distance.
  • Condensation can damage the product. Allow it to reach room temperature before powering after a cold transfer.
  • A stated IP rating applies only when the product is correctly assembled with approved seals, cable glands and covers; it does not apply to an indoor power supply.

Battery and Charging Safety:

Battery: INR, 18650, 3.7 V, 6000 mAh / 22.2 Wh, rechargeable, serviceable by authorized technicians.

Charging: Charge only through approved camera input / charger / solar panel and its electrical rating within the charging temperature range (0°C to 40°C). Stop charging if the product becomes unusually hot, swells, leaks, smells unusual or is damaged.

Discharge (operating) temperature: -10°C to 60°C.

Charging input: DC 5V=2A.

Solar panel (electrical parameters, for information only): Vmp ≤ 5.5 V, Imp ≤ 1 A, Voc ≤ 6.5 V, Isc ≤ 1.1 A, operating within -10°C to 45°C.

Battery safety warnings: Do not crush, puncture, short-circuit, disassemble, heat above 72°C (+2°C) burn, or place the battery in water. Keep loose batteries away from metal objects and observe the marked polarity. Do not mix old and new batteries, different chemistries, brands, or charge levels. Never recharge a non-rechargeable battery.

Battery replacement (if user-replaceable): Switch off the device and disconnect the mains adapter before replacing the battery. Use only certified batteries (rated voltage 3.7 V, capacity 8000 mAh, specifications verified as complying with GB 31241). Carry out replacement at a temperature of -10°C to 45°C and relative humidity ≤ 85% RH (non-condensing).

3. Setup Guide

3.1 Initial Charging

The camera's internal battery is not fully charged due to shipping safety regulations. Please use a USB cable (5V adapter not included) to charge the battery. The LED indicator light will be red while charging and turn off when fully charged. A full charge takes approximately 5-6 hours.

Camera charging status with red indicator light

Image: Camera charging status with red indicator light.

3.2 App Download and Registration

Scan the QR code below or search for "Yuicam" in the APP Store/Google Play to download the official application.

QR code for Yuicam app download

Image: QR code for Yuicam app download.

  1. After entering the APP login interface, click the upper right corner for the registration function.
  2. Enter your country, registered e-mail address, and desired APP login code.
  3. Read and accept the User Agreement and Privacy Policy, then click Next.
  4. An e-mail authentication interface will appear. The APP will send a registration verification code to your registered e-mail address. Enter this code into the APP registration verification code box. If you do not receive the verification code, please check your spam mailbox.

Note: The camera only supports 2.4GHz WiFi. Ensure your network is configured accordingly.

3.3 Adding a Device

  1. On the home screen, click the "+" icon in the upper right corner or "Add Device" in the center of the screen.
  2. On the 'Select the device type' screen, enable the app's 'Location permissions' and 'Nearby devices permissions'.
  3. The app will automatically detect the serial number of the device connected to your mobile phone.
  4. Enter your router's WiFi name and password in the respective fields. If the camera supports 5GWiFi, it can connect to both 2.4G/5GWiFi. If not, it will only connect to 2.4GWiFi.
  5. Once successfully connected, the app will redirect you to set the device name.

3.4 Account Security

  • Enable multi-factor authentication where available.
  • Do not reuse passwords.
  • Give each authorized user an individual account and minimum necessary permissions.
  • Remove access promptly when no longer needed.

3.5 Mounting and Positioning

Place or mount the camera on a stable surface. The recommended installation height is 2.5 meters. Avoid strong backlighting, direct sunlight, reflective surfaces, high temperatures, and swaying leaves. Position the camera in a straight line with the router, avoiding thick solid walls, fridges, digital TV sets, cordless phones, Bluetooth devices, and other equipment that causes significant interference to the Wi-Fi signal.

The camera uses PIR detection for alarms; the optimal installation height is 2.5 meters.

Camera Mounting Steps:

  1. Mark holes on the wall using the provided drilling template. Drill 4 holes using a 6mm (15/64") drill bit.
  2. Install anchors to fix the screws.
  3. Align the Support plate with the drilled screw holes, and fix the Support plate to the wall with the matched screws.
  4. Align the raised positions on both sides of the camera support with the slots on both sides of the support plate, and then push the camera upward until it connects directly with the support plate.
Diagram showing 360-degree panoramic view capability of the camera.

Image: Diagram illustrating 360-degree panoramic view capability of the camera.

Solar Panel Installation Steps:

  1. Secure the solar panel bracket in place using the screws provided. First, drill a hole in the wall.
  2. Insert the wall plug into the hole, and then secure the bracket with the screws.
  3. Screw the gimbal into the back of the solar panel. Tighten it with the included nut.
  4. Screw the locking screw into place, ensuring the universal joint is angled upward.
Solar-powered WiFi camera mounted on a wall under sunlight.

Image: Solar-powered WiFi camera mounted on a wall under sunlight.

4. Operating Instructions

4.1 Video Interface Features:

The app's video interface provides various controls for managing your camera:

  • Camera Settings: Access general camera configurations.
  • Picture Quality Switch (2K): Adjust video resolution.
  • Cut to Camera (1X 4X): Switch between different camera views or zoom levels.
  • Full Screen: View the video feed in full screen.
  • Monitor: Activate monitoring mode.
  • Call/Intercom: Initiate two-way audio communication.
  • Manual Video: Manually start video recording.
  • Take a Picture: Capture a still image.
  • Warning Message: View alert notifications.
  • Video Replay: Access recorded footage.
  • PTZ Functions: Control Pan, Tilt, and Zoom movements.
  • Favorites: Save preferred camera positions.
  • Setting the Night Vision Mode: Adjust night vision settings (e.g., full color, infrared).
  • Warning Sound: Activate or deactivate warning sounds.
  • Setting the Call Mode: Configure call-related settings.
Camera with full-color night vision illuminating a dark outdoor scene.

Image: Camera with full-color night vision illuminating a dark outdoor scene.

4.2 Alarm Settings:

To configure motion alerts, go to Camera Settings > Motion Alert and turn Motion Alert on.

  • Time Table: Selects the camera detection time. Users can choose all day or customized time.
  • Alarm Attachment: Determines whether the camera records a video or takes a picture when an alarm is triggered. By default, the camera takes a picture; manually change to video if desired.
  • Detection Area: Specify the video area for detection. Alarms will not be triggered outside this area.
  • Detection Sensitivity: Adjust the camera's detection sensitivity. Higher sensitivity drains the battery faster.
  • Detection Interval: Set the interval between consecutive alarms. For example, if set to 50 seconds, a second alarm will not trigger within 50 seconds of the first.
Image showing PIR Human Detection feature, with a person approaching a door and a phone notification.

Image: PIR Human Detection feature with phone notification.

4.3 Equipment Sharing:

To share your camera with another user:

  1. Install the "Yuicam" app on the other phone, register a new account, and log in.
  2. Go to Camera Settings > Invite Family and Friends > Invite New Members.
  3. Input the account number of the sharing user, confirm it is correct, and click Next. The APP will confirm the invitation.
  4. When prompted with "Device Sharing" in the invitee's app, click "Receive" to complete the sharing.

4.4 Video Demonstration:

Video: Product demonstration showcasing features like two-way call, automatic tracking, cruise detection, and full-color night vision.

5. Maintenance

  • Disconnect power before cleaning.
  • Wipe with a soft, dry or slightly damp lint-free cloth. Do not use solvents, abrasives or high-pressure water.
  • Keep the lens, microphone opening, ventilation slots, cable seals and mount free from dirt and obstruction.
  • For outdoor products, inspect seals, fasteners, cables and corrosion every six months and after severe weather.
  • Test live view, alerts, recording, storage, account access and update status at least once every three months.
  • Wipe dust from the surface of the solar panels with clean water or a cloth at least once every two months.

6. Troubleshooting

6.1 Cannot Connect:

  • Check supported Wi-Fi band/security, signal strength, router isolation settings, app permissions, date/time, and service status.
  • Move the camera temporarily closer to the router.

6.2 Video Unavailable / Poor Quality:

  • Check bandwidth, privacy mode settings, lens cleanliness, lighting conditions, resolution settings, and the number of concurrent users.
  • Avoid uploading sensitive diagnostics publicly.

6.3 No Recordings:

  • Check event rules, ensure recording is enabled, verify the SD card is not damaged, and confirm the SD card has been formatted.

6.4 Frequent False Alarms / Incorrect Recognition:

  • Adjust activity zones/sensitivity.
  • Avoid reflective surfaces, insects, rain, heat sources, and moving foliage.
  • Improve lighting/angle, correct labels, and delete poor examples.
  • Disable recognition if lawful, fair, and reliable use cannot be maintained.

6.5 Update Failed:

  • Keep power/network stable.
  • Retry the official update process and contact support if issues persist.
  • Do not install unverified firmware.

6.6 Account / Device Compromised:

  • Disconnect if safe.
  • Change account/router passwords.
  • Revoke sessions.
  • Enable Multi-Factor Authentication (MFA).
  • Preserve relevant logs and contact security support.

7. Specifications

7.1 Network:

Parameter Value
Wireless network 2.4G WiFi IEEE 802.11 b/g/n/ax (Wi-Fi 6)
Operating Frequency Band 2412 - 2472MHz
Maximum Radio-Frequency Power (EIRP) 15.44dBm

7.2 Power Consumption (Commission Regulation (EU) 2023/826):

Mode Consumption
Power consumption in standby mode 0.0025W
Networked equipment (networked standby) 0.005W
Time to automatically reach standby mode 2 min
Time to automatically reach networked standby 1 min

7.3 Imaging Systems:

Parameter Specification
Image sensor CV2005 low-light CMOS sensor
Lens Focal length 4 mm, aperture F2.0
Field of view 90° diagonally
Video encoding H.264/JPEG
Video frame rate 15fps
Supported resolutions 2304*1296p/640*360p
Image Rotation/Mirroring Support
Image Settings Time display settings

7.4 Hardware and Environment:

Parameter Specification
Mobile detection Motion Detection, Human Detection
Power consumption Standby current: 1mA, Maximum operating current: 1.3 A
Infrared LED Wavelength 850
Power adapter USB 5V adapter
White light fill lamp Colour temperature 4000
Operating temperature -10 ~ 55°C
Memory card SD cards, 8-256 GB
Microphone/Speaker 8KHz/16bit: G711A; External -38 dB microphone; External 8Ω 1 W loudspeaker
Dual-lighting Full-colour night vision, dual light sources, 8 dual-colour dual-light-source LEDs
Digital zoom 5x digital zoom

8. Warranty and Support

8.1 Servicing:

The product contains no user-serviceable parts except the microSD card, battery, and solar panels. Do not open the enclosure. Contact a professional repair technician if the product is damaged, emits smoke or unusual odor, has been exposed to liquid beyond its rating, or operates abnormally.

8.2 Cybersecurity, Updates, and Product Lifetime:

Information Details
Security lifecycle information Verified release text
Security-update support period 5 years
Update delivery OTA via app push notifications
Effect of delaying/declining updates Due to unpatched security vulnerabilities, some features may be restricted.
Vulnerability reporting http://www.szsinocam.com/Reporting/
Technical security support During the support period, free technical security support is provided. Contact via the APP or email after-sales support at gaojun08@szsinocam.com.
End-of-support notice Security updates for this product will be provided for a period of five years from the date of release, ending in December 2032.

8.3 Disposal and Recycling:

This product must not be disposed of as unsorted municipal waste. Take it to an appropriate separate-collection facility or use the return/take-back route available in your country. Proper collection supports reuse and recycling and reduces risks to health and the environment. Remove personal data before disposal.

Do not place waste batteries in household waste. Removal is by an independent professional; prevent short circuits and return the battery separately.

9. User Tips

  • For optimal solar charging, ensure the solar panel receives at least 5 hours of direct sunlight daily.
  • Regularly check the camera's battery level through the app to ensure continuous operation.
  • To maximize battery life, adjust motion detection sensitivity and recording intervals as needed.
  • Periodically clean the solar panel and camera lens to maintain efficiency and clear image quality.
  • Utilize the two-way audio feature for direct communication or to deter unwanted visitors.
  • Take advantage of the 360° panoramic view to cover a wide area, and use PTZ functions to focus on specific points of interest.
  • Consider using both cloud and SD card storage for redundant backup of important footage.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.