Introduction
This manual provides instructions for the assembly, operation, and maintenance of your vidaXL TV Stand. Please read these instructions carefully before assembly and retain them for future reference.
Image: Front view of the white vidaXL TV Stand, showcasing its design and functionality with a TV and decor.
Safety Information
- Always assemble the TV stand on a clean, soft surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use.
- Do not overload the TV stand; adhere to weight limits for the top surface and shelves.
- Keep small parts away from children during assembly.
- Periodically check all connections and re-tighten if necessary.
Package Contents
Before beginning assembly, please verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Engineered wood panels (various sizes for top, bottom, sides, shelves, drawers)
- Drawer slides and handles
- Assembly hardware (screws, dowels, cam locks, etc.)
- Instruction manual (this document)
Setup and Assembly
Assembly is required for this TV stand. Please follow these general steps. Refer to the specific assembly diagrams and instructions included in your product packaging for detailed guidance.
- Unpack and Identify Parts: Carefully unpack all components and lay them out on a soft, clean surface. Identify each part using the provided parts list.
- Assemble the Main Frame: Begin by attaching the side panels to the bottom panel using the specified hardware (e.g., dowels and cam locks).
- Install Shelves and Dividers: Insert the internal shelves and dividers into their designated slots or attach them with hardware.
- Assemble Drawers: Construct the drawer boxes by attaching the sides, front, and back panels. Install the drawer slides onto the drawer boxes and the corresponding locations on the TV stand frame. Attach the handles to the drawer fronts.
- Attach Back Panel: Secure the back panel to the main frame using small nails or screws.
- Attach Top Panel: Place and secure the top panel to the assembled frame.
- Final Tightening and Placement: Once fully assembled, gently move the TV stand to its desired location. Ensure all connections are tight and the stand is stable.
Image: The TV stand with drawers open, illustrating the storage capacity.
Operating Instructions
Your vidaXL TV Stand is designed for convenient storage and display of your entertainment equipment and media.
- Placing a Television: Carefully place your television on the top surface of the stand. Ensure the TV's base fits securely and does not overhang excessively. Distribute the weight evenly.
- Using Open Compartments: The open compartments are ideal for media players, gaming consoles, soundbars, or decorative items. Ensure proper ventilation for electronic devices.
- Using Drawers: The two drawers provide enclosed storage for DVDs, remote controls, cables, or other accessories, helping to keep your living space tidy.
Image: Front view of the TV stand with drawers closed, highlighting the open compartments.
Maintenance
- Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the engineered wood finish.
- Spills: Immediately wipe up any spills to prevent moisture damage.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.
- Stability Check: Periodically check all screws and fittings to ensure they remain tight. Re-tighten if necessary to maintain stability.
Troubleshooting
- Issue: TV stand feels wobbly after assembly.
- Solution: Ensure all cam locks and screws are fully tightened. Check that the stand is on a level surface. If not, use furniture levelers if available or place shims under the feet.
- Issue: Drawers do not slide smoothly.
- Solution: Verify that the drawer slides are correctly installed and aligned. Ensure no debris is obstructing the tracks. A small amount of silicone lubricant can be applied to the slides if needed.
- Issue: Parts do not fit together during assembly.
- Solution: Double-check the part numbers against the assembly instructions. Ensure parts are oriented correctly. Do not force parts together, as this can cause damage.
Specifications
| Feature | Detail |
|---|---|
| Model Number | AT202601 |
| Brand | vidaXL |
| Material | Engineered Wood (Wooden) |
| Overall Dimensions (L x D x H) | 93 x 35.5 x 45 cm |
| Weight | Approximately 21.52 kg |
| Color Options | White, Brown, Grey |
| Storage | 2 Drawers, 2 Open Compartments |
| Installation Method | Assembly Required |
Note: Dimensions and weight are approximate and may vary slightly.
Brown variant
Grey variant
User Tips
- For optimal stability, place the TV stand against a wall.
- Consider using cable management clips or ties to keep wires organized and out of sight.
- If placing heavy items in the open compartments, ensure they are distributed evenly to prevent bowing of the shelves.
- When moving the TV stand, always lift it rather than dragging to prevent damage to the base and floor.
Warranty and Support
For any questions regarding assembly, missing parts, or product defects, please contact the retailer or manufacturer's customer support. Keep your proof of purchase for warranty claims.
This product is designed for residential use. Any modifications to the product may void the warranty and compromise safety.
