DATA FROG ACC03

Contents

Data Frog PC07 Wireless Retro Game Controller

Model: ACC03 | Brand: DATA FROG

Introduction

Thank you for purchasing the Data Frog PC07 Wireless Retro Game Controller. This manual provides detailed instructions on how to set up, operate, and maintain your new game controllers. Designed for a classic retro gaming experience, these controllers offer stable 2.4GHz wireless connectivity and broad compatibility with various platforms.

Two Data Frog PC07 wireless controllers and dual USB receivers

Image: Two Data Frog PC07 wireless controllers (black) with a USB receiver and a USB to Type-C & Micro adapter.

Package Contents

Please check the package to ensure all items are present:

  • 2 x Data Frog PC07 Wireless Controllers
  • 1 x Dual USB Wireless Receiver
  • 1 x USB to Type-C & Micro Adapter
  • 1 x User Manual (this document, or refer to the PDF version)
Contents of the Data Frog PC07 package, showing two controllers, a wireless receiver, and a USB adapter.

Image: Package contents including two wireless controllers, a wireless receiver, and a USB to Type-C & Micro adapter.

Setup Guide

1. Battery Installation

  1. Locate the battery compartment on the back of each controller.
  2. Open the battery cover.
  3. Insert 1 AAA battery into each controller, ensuring correct polarity (+/-). (Batteries are not included)
  4. Close the battery cover securely.
Controller with open battery compartment showing AAA battery slot and quick wake-up button

Image: Illustration of AAA battery installation and the quick wake-up button on the controller.

2. Connecting the Wireless Receiver

The Data Frog PC07 uses a 2.4GHz wireless connection via a dual USB receiver, supporting two players simultaneously.

  • For PC (Windows, MAC, Linux): Plug the USB wireless receiver directly into an available USB port on your computer.
  • For Android Devices & TV Boxes: Use the provided USB to Type-C & Micro adapter if your device requires it, then plug the USB wireless receiver into the adapter.
Diagram showing USB receiver being plugged into a port, and controllers being used for gaming.

Image: Visual guide for plugging in the USB receiver and using the controllers.

Two controllers and a 2.4G wireless receiver, highlighting stable connection up to 10 meters.

Image: Dual receiver setup for stable 2.4GHz wireless connection.

3. Powering On the Controller

After installing batteries and connecting the receiver, slide the ON/OFF switch on the controller to the 'ON' position. The controller should automatically connect to the receiver. No drivers are typically needed for most compatible systems (Plug & Play).

Operating Instructions

1. Basic Controls

The controller features a classic retro layout with a D-pad, action buttons (A, B, X, Y), SELECT, START, ON/OFF switch, and shoulder buttons (L1, R1).

2. Digital/Analog Mode Switching

The controller supports both Digital and Analog input modes. To switch between modes, press and hold the R1 + L1 + SELECT buttons simultaneously. This allows compatibility with a wider range of games and emulators.

3. Power-Saving Mode & Quick Wake-up

To conserve battery life, the controller features an intelligent auto-sleep function that activates after a period of inactivity. To wake up the controller, simply press the START button.

4. Wireless Range

The 2.4GHz wireless connection provides an ultra-stable connection within a 10-meter (approximately 32 feet) range, ensuring responsive gameplay without interference.

Maintenance and Care

  • Cleaning: Use a soft, dry cloth to clean the controller. Avoid using harsh chemicals or abrasive materials.
  • Battery Replacement: When the controller's performance degrades or it fails to power on, replace the AAA battery with a fresh one.
  • Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
  • Avoid Drops: Protect the controller from drops and impacts, which can damage internal components.

Troubleshooting

Problem Possible Cause Solution
Controller does not power on. Low or dead battery; incorrect battery installation. Replace the AAA battery; ensure correct polarity.
Controller does not connect to device. Receiver not properly inserted; out of range; interference; controller not powered on. Ensure receiver is fully inserted; move closer to receiver; power on controller; try a different USB port.
Buttons are unresponsive or incorrect input. Incorrect mode (Digital/Analog); software/emulator configuration; specific button issues. Switch between Digital/Analog modes (R1 + L1 + SELECT); check game/emulator settings for controller mapping. Note: Some users report D-pad and analog output may not be independent, or L/R keys may affect directional input, or multiple buttons may register as one. This may indicate a compatibility limitation with certain games/emulators or a specific unit issue.
Controller not recognized by PC. PC operating system not compatible with DInput; driver issues. Ensure your PC game or emulator supports DInput (DirectInput). This controller is primarily designed for DInput.

Specifications

Feature Detail
Model Number ACC03
Brand Name DATA FROG
Type Gamepads
Connection Type 2.4GHz Wireless
Wireless Range Up to 10 meters
Compatible Brand/Model PC (DInput only), Android devices, TV boxes, MAC, Linux, Genesis, Raspberry Pi, Retropie
PC System Compatibility Windows 10 (and likely other Windows versions supporting DInput)
Battery 1 x AAA battery (not included) per controller
Battery Life Up to 32 hours (approximate)
Key Lifespan >1,000,000 presses
Key Force 130g
Key Type Silicone Pad
Package Dimensions (approx.) 23 cm (Length) x 20 cm (Width) x 8 cm (Height)
Package Weight (approx.) 0.286 kg
Side profile of a red controller highlighting durable build, key lifespan, key force, and key type.

Image: Durable build and comfortable grip features of the controller.

User Tips

  • These controllers are highly recommended for classic retro games and emulators due to their design and functionality.
  • The overall build quality is generally considered good by users.
  • Be aware that the D-pad and analog stick might not always provide independent outputs in all games or emulators.
  • Some users have reported issues where pressing L and R keys can interfere with directional input, or where multiple buttons are recognized as a single input. If you encounter this, try adjusting your game or emulator's controller settings.
  • The controller is not compatible with Nintendo Switch OLED or similar modern consoles; it is designed for PC (DInput), Android, and retro emulation platforms.

Warranty and Support

For detailed warranty information and further support, please refer to the official product documentation. A comprehensive user manual in PDF format is available for download and can be accessed via this link: Data Frog PC07 User Manual (PDF).

If you experience any issues not covered in this manual, please contact the seller or manufacturer's customer support for assistance.

© 2024 DATA FROG. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.