1. Important Safety Information
Please read all instructions carefully before installation and operation. Professional installation by a car audio professional is highly recommended.
General Precautions
- Do not watch videos or operate the machine while driving. Adjust volume to hear outside sounds clearly.
- If difficulties arise during operation, park your car in a safe place before proceeding.
- Do not allow children to operate the machine to prevent personal injury or damage.
- Follow traffic rules when using the satellite navigation function.
- Avoid using electronic equipment in prohibited areas (e.g., gas stations, wineries, strong electromagnetic interference areas).
- Do not attempt to maintain, repair, or install the machine yourself, especially with power on. This is dangerous and should only be done by trained professionals.
- Do not install or store the machine in direct sunlight or near hazardous substances.
- If the LCD screen is near air conditioning ventilation, ensure cool and hot air does not blow directly onto the machine, as this may cause damage.
- Do not scratch the display screen with sharp objects or press it vigorously with hard objects, as this can damage the screen.
Power and Wiring Safety
- Do not replace the power fuse without professional guidance. Improper use can cause damage or fire.
- To prevent short circuits, always turn off the car and disconnect the connection between ACC and B+ before installation.
- This machine is suitable for a 12V car power system with a grounding wire. Do not install on 24V vehicles, as it will damage the unit.
- Avoid placing the product in wet environments or near water to prevent electric shock or other damage.
2. Product Overview
The MEKEDE T113 is a car multimedia player designed to upgrade your BMW's infotainment system with modern features like wireless CarPlay, Android Auto, GPS navigation, and Bluetooth connectivity, while retaining original car functions.
Compatibility
This unit is compatible with specific BMW 3 Series and 5 Series models. Please verify your car's original system (CCC or CIC) and LVDS connector type before installation.
| System | Model | Year | Screen |
|---|---|---|---|
| CCC | E60 E90 | 2005-2008 | 8.8inch |
| CIC | E60 E90 | 2008-2010 | 8.8inch |
For BMW 5 Series E60 E61 E63 E64 2004-2010 (original CCC iDrive, 10pin LVDS)
For BMW 5 Series E60 E61 E63 E64 2004-2010 (original CIC iDrive, 4pin LVDS)
For BMW 3 Series E90 E91 E92 2005-2012 (original CCC iDrive, 10pin LVDS)
For BMW 3 Series E90 E91 E92 2005-2012 (original CIC iDrive, 4pin LVDS)

LVDS Connector Types
It is crucial to identify the correct LVDS connector type in your original car system:
- Original 10-pin LVDS connector: Choose the CCC version.
- Original 4-pin LVDS connector: Choose the CIC version.

Package Contents
The package includes the main unit and necessary accessories for installation and operation.

Specific accessory lists may vary slightly between Linux and Android system versions:


3. Setup and Installation
Installation of this multimedia player requires careful attention to wiring and system configuration. Professional installation is highly recommended.
Wiring Connections
Refer to the following diagrams for specific wiring connections based on your vehicle's system (EVO, NBT, CIC, CCC, NTG, A4/Q5).

Specific Wiring for EVO Series (Vehicle Series 1)

Sound Output Configuration (AUX Mode)
This unit outputs sound through the AUX interface. It is essential to confirm that your car has an AUX function before installation. If your car does not have AUX, you may need an FM transmitter, but the sound quality will not be as good as direct AUX connection.

Retaining Original Car Functions
After installing the MEKEDE T113, your original car functions such as the radio system, CD function, steering wheel controls, audio system, reversing image, and i-Drive control will continue to work properly.

4. Operating Instructions
Main Menu Navigation
When the machine powers on, the original car interface will be displayed. Long press the original car MENU key to switch to the navigation interface. From the main menu, touch the 'Home' icon to return to the main interface, and the 'Back' icon to return to the upper menu.

System Settings
Access system settings by clicking the 'Settings' icon on the main menu. This interface includes options for language, audio, system, and system information. Further navigation within settings allows access to secondary menus for navigation settings and more.
Bluetooth Function
Click 'Bluetooth' on the main interface to enter the Bluetooth application. Once paired with a mobile phone, all icons in the interface will light up, and a Bluetooth icon will appear at the top of the interface. Features include BT music, contact synchronization, and call recording.

Multimedia Playback (Film & Music)
Click 'Movie' or 'Music' on the main interface to play audio and video files. The unit supports AVI, MP4, RMVB, MP3, WAV, and MID formats from external SD cards or USB devices. Double-click the screen for full-screen mode; touch any area to return to the operation interface.

Instrument Display
Click the instrument icon on the main interface to view car information such as speed, fuel level, oil pressure, and safety warnings on the dashboard.

CarPlay & Android Auto
The unit supports both wireless and wired CarPlay and Android Auto. Connect your iPhone or Android phone to intelligently and safely use navigation, make calls, send/receive messages, and listen to music. The phone screen can be mirrored to the player.

Phone Mirrorlink (AirPlay & Autolink)
Support for wireless/wired mirror link for both iOS and Android phones allows you to display your phone's screen on the unit. This feature enables map navigation, video playback, and music streaming directly from your phone's apps.

Dual System Free Switching
The unit supports dual system operation, allowing you to switch freely between the original car system and the Linux/CarPlay menu with one button.

UI Customization
The device supports UI replacement, offering personalized UI designs that integrate commonly used functions into the desktop. You can switch between different UI styles and benefit from automatic day/night mode switching to reduce visual fatigue.

GPS Navigation
The built-in global positioning system provides omni-directional map display, synchronous display of real-time traffic conditions, and rapid, accurate positioning. It supports various navigation applications.

AHD Reversing Video
The unit supports AHD rear-view video, providing clearer picture quality compared to ordinary cameras. Note that the rear view camera is typically not included and must be purchased separately.

Added Camera Wiring and Settings
For an added reversing camera, connect the reverse line detection to the reversing detection lamp and the ground wire. In the settings, navigate to 'BackCar setting' to configure the camera type. If using an original camera, set the camera type to 'Original back car'.

5. Maintenance
To ensure the longevity and optimal performance of your MEKEDE T113 multimedia player, follow these maintenance guidelines:
- Keep the screen clean using a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Ensure proper ventilation around the unit to prevent overheating.
- Regularly check all cable connections to ensure they are secure.
- Perform system firmware updates (OTA) when available to benefit from new features and optimized performance.

6. Troubleshooting
Frequently Asked Questions
- Problem: No response to key operation (protocol failure), abnormal display, flower screen.
Reason: Model setting is not correct.
Solution: Enter the factory Settings to set the correct model. - Problem: No Bluetooth function.
Reason: There is no Bluetooth pairing and connection with mobile phone.
Solution: Enter the Bluetooth Settings and check the machine name and password. - Problem: No video display on the dashcam.
Reason: The type of dashcam is not chosen correctly.
Solution: In system Settings > Factory Settings > ARM related Settings > Dashcam Settings, select the correct dashcam type. - Problem: No display when reversing.
Reason: Wrong choice of reversing camera.
Solution: Enter the Settings inside the reversing Settings, choose the original car or rear mounted camera.
How to Solve No Sound Problem
- Connect the original car fiber optic cable to the interface of the conversion line, and then connect to the host.
- Connect the "AUX" cable and switch the mode to "AUX" in your original car system.

Display Issues
- What if my original system doesn't show up?
Connect the original LVDS cable to the back connector of the Android radio. - What should I do if the original system is flashing?
Please input “Setting” > “Personalized Setting” > “Resolution ratio”. The display screen of the original car should correspond to the selected option; otherwise, the display quality may be poor.

7. Specifications
| Feature | Specification |
|---|---|
| Warranty | 3 years |
| Built-in DVD Player | No |
| Built-in CD Player | No |
| Touch Screen | Yes |
| Built-in Screen | Yes |
| Category | Car multimedia player |
| TF/Micro SD Slot | 0 |
| RAM | 256Mb (Linux System) / 4+64G (Android System) |
| Interface | Plug and play |
| Operating System | Linux (or Android for specific variants) |
| Out Power | 45W |
| Voltage | 12 V |
| Item Size | 8.8 Inch / 9.3 Inch |
| Output Type | Colored |
| Special Features | WiFi function, Built-in GPS, Charger, Mobile Phone, MP3 players, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control |
| Digital Media Format | DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG |
| OSD Language | Chinese (Traditional), Arabic, Irish, Polish, Danish, German, Russian, French, Korean, Dutch, Czech, Malay, Japanese, Swedish, Thai, Turkish, Ukrainian, Greek, Spanish, Italian, English, Vietnamese |
| Resolution | 1280*480 / 1920*720 / 2400*900 |
| Display Size | 8.8” / 9.3” |
| Certification | CE, Dot, FCC, RoHS, WEEE |
| Material | Plastic + Hardware + Screen |
| WiFi | Support |
| Built-in GPS navigation systems | Support |
| Wireless iPhone CarPlay | Support |
| Wireless Android Auto | Support |
| Original car information | Support |
| Steering wheel controls | Support |
| Split Screen | Support |
| iDrive | Support |
| Reversing camera | Optional |
| Front camera DVR ADAS | Optional |
| 1080P Video player | Support |
| Operating temperature | -20°C ~ +70°C |
| Storage temperature | -30°C ~ +85°C |
| Working humidity | 45% - 80% |
| Storage humidity | 30% - 90% |
8. Warranty and Support
The MEKEDE T113 Car Multimedia Player comes with a 3-year warranty. If the product experiences problems within 15 days after confirmation, free replacement support is offered (contact staff for details).
For further assistance, please refer to the official user manual PDF: View User Manual (PDF)
MEKEDE aims to continuously innovate and provide a personalized experience, offering free software, user interface, and GPS navigation map updates.
9. User Tips
- Sound Issues: Many users report that sound problems are often resolved by correctly connecting the fiber optic cable to the amplifier and ensuring the car's original system is set to AUX mode. Double-check these connections during installation.
- Display Glitches: If your cluster starts jumping or the original system flashes, verify all connection wires are secure. Also, ensure the display resolution is correctly set in the unit's settings to match your original car's display.
- Software Updates: Take advantage of OTA (Over-The-Air) updates to keep your system optimized and benefit from new features.
- Support: While the product is generally well-regarded, some users have noted that direct communication with the store for support can be challenging. Utilize the provided troubleshooting steps and PDF manual first.
- Android vs. Linux: Consider the Linux version for a stable, up-to-date CarPlay/Android Auto experience if the price difference is significant, as it often provides sufficient functionality without the complexities of a full Android system.
10. Product Video
Watch this video for a visual demonstration of the product's features and operation.