1. Introduction
Thank you for purchasing the X15 Violent Fan. This high-speed handheld turbo fan is designed for a variety of applications, including camping, outdoor activities, car cleaning, PC cleaning, and as a powerful dust blower. Featuring a brushless motor, multiple speed settings, and a portable design, it offers efficient and versatile performance. Please read this manual thoroughly before use to ensure safe and optimal operation.
2. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
- WARNING: Keep this product and its small parts out of reach of children under 3 years old due to choking hazard.
- WARNING: Do not disassemble, modify, or repair this product by yourself. Unauthorized modifications will void the warranty and may cause safety hazards.
- WARNING: Do not expose the product to water, moisture, extreme temperatures (below 0°C or above 40°C) or direct sunlight for long periods.
- WARNING: Stop using the product immediately if it shows signs of damage, cracking, overheating, or malfunction.
- WARNING: Keep the product away from open flames, flammable materials, and high-voltage sources.
- WARNING: Please use only the original charging cable and adapter. Do not overcharge the battery.
- WARNING: Wear protective gloves when installing sharp-edged parts (if applicable).
3. Package Contents
Please check the package for the following items:
- X15 Violent Fan Unit
- Standard Nozzle
- USB Charging Cable
- Storage Case
Note: Depending on the purchased option (e.g., Vacuum Kit), additional nozzles and various cleaning brushes may be included.


4. Setup
- Unpacking: Carefully remove all protective films and packaging materials from the product. Inspect all parts to ensure they are complete and undamaged.
- Charging: For optimal performance, fully charge the device before its first use. Connect the USB charging cable to the fan's charging port and plug the other end into a suitable USB power adapter (not included). The indicator light will show charging status.
- Attach Nozzle: Select the appropriate nozzle for your task and firmly attach it to the fan's air outlet.
5. Operation
Use the product only for its intended purpose as described.
- Power On/Off: Press and hold the power button (usually located on the handle) to turn the fan on or off.
- Speed Control: The X15 Violent Fan features multiple speed gears. Press the power button briefly to cycle through the available speed settings. The fan typically has 3 gears:
- Gear 1: Approximately 40,000 RPH (Revolutions Per Hour)
- Gear 2: Approximately 80,000 RPH
- Gear 3: Approximately 150,000 RPH
- Auxiliary Lighting: Some models are equipped with auxiliary LED lighting. This can be activated or deactivated via a dedicated button or by cycling through power modes.
- Digital Display: If your model has a digital display, it may show battery level, current gear, or other operational information.


6. Maintenance & Storage
- Cleaning: Turn off the device before cleaning. Use a soft, lint-free cloth to wipe the surface. Do not use harsh chemicals or abrasive cleaners. Ensure air intake and exhaust vents are clear of debris.
- Storage: Store the fan in a dry place at room temperature (15°C - 35°C). Keep it away from direct sunlight and extreme temperatures.
- Long-term Storage: If the device will not be used for an extended period, charge the battery to approximately 50% every 3 months to maintain battery health.
7. Troubleshooting
- Device not turning on: Ensure the battery is sufficiently charged. Connect to the charger and try again.
- Reduced wind power: Check if the battery is low. Ensure the nozzle and air intake vents are not obstructed.
- Device overheating: Stop use immediately and allow the device to cool down in a well-ventilated area. Ensure vents are clear. The device has built-in overheat protection.
- Unusual noises: Turn off the device and check for any foreign objects in the fan blades or vents. Do not attempt to disassemble the unit.
If problems persist, please contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Product Name | X15 Violent Fan |
| Motor Type | 230W High-speed Brushless Motor |
| Battery Capacity | 6000mAh |
| Working Time | 10 minutes (max gear) - 100 minutes (min gear) |
| Charging Time | Approx. 2.5 - 3 hours (15W fast charge) |
| Wind Speed | 45+ m/s |
| RPM (Max) | 150,000 RPH |
| Product Dimensions | 133 x 58 x 36 mm (L6.2 x W1.6 x H2.4 inches) |
| Weight | 285g / ~0.63 lb |
| Protection | Overheat Protection (NTC 105°C) |
| Certifications | CE, UKCA, FC |


9. User Tips
- Always fully charge the fan before extended use, especially for outdoor activities.
- Select the appropriate nozzle for the task. A narrower nozzle provides more concentrated airflow, while a wider one covers a larger area.
- Start with lower speed settings and increase as needed to conserve battery life and prevent accidental damage to delicate items.
- Keep the air intake and exhaust vents clear of obstructions during operation to ensure optimal performance and prevent overheating.
- For cleaning electronics, ensure the device is powered off before using the fan to blow away dust.
10. Disposal & Recycling
This symbol indicates that this product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health. Please contact your local authorities for information on designated collection points.
11. Compliance Information
This product complies with relevant EU legislation, including Machinery Regulation (EU) 2023/1230. This product bears the CE, UKCA, and FC marks, indicating conformity with applicable health, safety, and environmental protection standards.
12. Warranty & Support
For warranty information, technical support, or service inquiries, please refer to your point of purchase or contact the seller directly. Keep your proof of purchase for warranty claims.