1. Safety Information
READ AND SAVE THESE INSTRUCTIONS.
- To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before you begin.
- All wiring must be in accordance with the National Electrical Code "ANSI/NFPA 70" and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.
- The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 lbs (15.9 kg). Use only UL Listed outlet boxes marked "Acceptable for Fan Support of 35 lbs. (15.9 kg) or less."
- Do not place objects in the path of the blades.
- To clean the fixture, turn off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.
- All setscrews must be checked and retightened where necessary before installation.
WARNING:
- To reduce the risk of electrical shock or fire, do not use this fan with any solid-state fan speed control device. It will permanently damage the electronic circuitry.
- To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets balancing the blades, or cleaning the fan. Do not insert any objects.
- To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked "acceptable for fan support of 35 lbs. (15.9 Kg) or less" and use screws provided with the outlet box.
- To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring.
- To reduce the risk of electrical shock, this must be installed with an isolating wall control / switch.
CAUTION:
- To reduce the risk of personal injury, use only the screws provided with the outlet box.
- Please use carefully when working around or cleaning the fan to avoid injury or damage of fan.
- The fan must be mounted with a minimum of 7 ft (2.1 m) clearance from the trailing edge of the blades to the floor.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
2. Product Overview: Exploded View
This diagram illustrates the main components of your ceiling fan.

Figure 2.1: Exploded View of Ceiling Fan Components
- Hanger Bracket: Secures the fan to the ceiling.
- Motor Assembly: The core unit that drives the fan blades.
- Outer Cover: Decorative housing for the motor assembly.
- Blade: Fan blades for air circulation.
- Light Kit: Integrated LED lighting unit.
- Lampshade: Diffuses light from the light kit.
3. Installation Instructions
Step 1: Mounting the Hanger Bracket
Determine your ceiling type and use the appropriate mounting hardware:
- For Wooden Roof: Use four wooden teeth screws.
- For Concrete Roof: Use four expansion screws.

Figure 3.1: Wooden Roof Installation

Figure 3.2: Concrete Roof Installation
Step 2: Install Motor Assembly
- Remove the four screws from the hanger bracket.
- Lock the motor assembly onto the hanger bracket using four screws.

Figure 3.3: Outlet Box Screws

Figure 3.4: Motor Assembly Installation
Step 3: Connection Remote Control Wiring
Make the following wire connections to the receiver unit using the wire nuts supplied:
- Connect the red, black, and white wires on the controller to the corresponding red, black, and white wires on the motor.
- Connect the white and blue lines on the controller to the white and blue lines on the motor.
- After making the wire connections, ensure the wires are spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box, and the ungrounded conductor on the other side of the outlet box.
- Ensure the splices are turned upward and pushed carefully up into the outlet box.

Figure 3.5: Remote Control Wiring Diagram
NOTE: Once ground wires are connected, carefully tuck all wires and marrettes into the metal box, making sure that the wires are clear of the hemisphere and downrod when positioned in the mounting bracket.
Step 4: Install Outer Cover
- Push all connected wires up into the ceiling box.
- Put the receiver into the mounting bracket.
- Ensure to connect all ground wires accordingly.
- Reserve installation positions on the three sides of the external component.

Figure 3.6: Receiver Placement

Figure 3.7: Outer Cover Installation
Step 5: Install Blades
Lock the fan blades up and down with screws.

Figure 3.8: Blade Installation
Step 6: Install Light Kit
- Remove light kit screws.
- Align the light kit hole with the connecting piece and lock the screw.
- Insert the terminal of the light wire into the light source port.
- Place the lampshade onto the fan and turn to secure.

Figure 3.9: Removing Light Kit Screws

Figure 3.10: Light Kit Alignment

Figure 3.11: Light Wire Terminal Insertion

Figure 3.12: Lampshade Installation
4. Operating Instructions
Remote Control Functions
The fan is operated via a remote control. Ensure the remote has 2 AAA (1.5V) batteries installed (not included).

Figure 4.1: Remote Control Layout
- Power On/Off: Press the 'ALL OFF' button to turn off all loads.
- Fan Speed Control: Adjust the fan speed using buttons 1-6. The fan offers 6 wind speeds: 1-2 (Sleep wind/Comfortable Wind), 3-4 (Natural wind), 5-6 (Strong wind/Cool Wind).
- LED Indicator Light: The remote has an LED indicator.
- Light On/Off & Color Change: Press the 'LIGHT ON/OFF' button to turn the light on or off. Each press cycles through 3 color temperatures: Cold Light (6000K), Warm Light (3000K), and Natural Light (4500K).
- Fan Off: Press the 'FAN/OFF' button to turn off the fan.
- Fan Direction Control (Reversible Motor): Use the 'F' (Forward/Summer Mode) and 'R' (Reverse/Winter Mode) buttons to change the fan's rotation direction.
- Summer Mode (Forward): Downward airflow quickly cools the room.
- Winter Mode (Reverse): Upward airflow quickly disseminates heat.
- Fan Timing Control: Set a timer for 1 hour ('1H'), 2 hours ('2H'), or 4 hours ('4H').
Remote Control Pairing (Learning Code)
If the remote control does not operate the fan:
- Turn "ON" the supply power to the fan.
- Within 10 seconds of turning on power, press the remote's "ALL OFF" button for 5 seconds.
- You will hear a long "bee" sound, indicating successful learning and normal operation.
Troubleshooting Remote: If the remote still doesn't work, check battery installation (positive/negative, full/empty) and ensure no similar remote-controlled products nearby are causing interference. Remove batteries if the remote will be unused for a long time.
Video 4.1: Product demonstration showing fan operation, light changes, and speed settings.
5. Maintenance
To ensure the longevity and optimal performance of your ceiling fan, regular maintenance is recommended:
- Cleaning: Turn off the power, wait for the fixture to cool, and wipe it with a clean, soft cloth. Avoid using harsh chemicals or abrasive cleaners.
- Screw Checks: Periodically check and retighten all setscrews, especially after initial installation, to ensure they are secure.
- Blade Balance: If the fan wobbles, check that all blades are screwed firmly into blade holders and that blade holders are securely tightened to the motor. Refer to the troubleshooting section for detailed steps on balancing.
6. Troubleshooting Guide
If you encounter any issues with your ceiling fan, refer to the table below for common problems and their solutions.
| Problem | Suggested Remedy |
|---|---|
| Fan does not work. |
|
| Fan sounds noisy. |
|
| Fan wobbles. |
|
| Light does not work. |
|
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | IRALAN |
| Model Number | CY01-FAN |
| Item Type | Ceiling Fans |
| Installation Method | Assembly |
| Luminous Flux | 2000-82000 |
| Control Method | Remote control |
| Number of Lights | >8 |
| Finish | Spray Paint |
| Features | Energy-saving Mute DC Motor, 3 Color Changeable Light, 6-speed adjustment, Dual mode (summer/winter) |
| Is Batteries Included | No |
| Nominal Voltage | 120V-240V |
| Is Dimmable | No |
| Is Bulbs Included | No (Integrated LED) |
| Certification | CCC, CE |
| Base Type | Wedge |
| Origin | Mainland China |
| Power Source | AC |
| Light Source | LED bulbs |
| Style | Modern Style |
| Switch Type | Remote control |
| Warranty | 2 Years |
| Body Material | ABS, Iron |
| Size (42 inch) | 105*105*22 CM |
| Size (52 inch) | 132*132*22 CM |
| Color Options | White, Wood Grain, Black |
| Material | Iron + ABS + Acrylic |
| Applicable Area | 10-25㎡ |
| Motor Power | 30W |
| Lamp Power | 18W |
| Lumen (42 inch) | 1620LM |
Note: There may be a small error in product size due to manual measurement; the actual size shall prevail.

Figure 7.1: Fan Dimensions and Features

Figure 7.2: 42-inch Fan Specifications
8. User Tips
- Quiet Operation: For quiet operation, especially during sleep, utilize the lower fan speeds (1-2). Higher speeds may produce more noticeable sound.
- Light Color Selection: The light color temperature cycles through Cold Light (6000K), Warm Light (3000K), and Natural Light (4500K) with each press of the light button on the remote. To select a specific color, press the button until the desired color appears.
9. Warranty and Support
This IRALAN Ceiling Fan comes with a 2-Year Warranty.
For customer service inquiries or support, please contact:
Customer Service: sxdsltd@.com
A detailed user manual in PDF format is also available for download. Please refer to the product page or contact customer service for the link.