1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your maXpeedingrods Front 3.5'' Rear 2.5'' Lift Kit. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The premium lift material is designed to maintain structural integrity and will not compress or warp, ensuring dependability under various riding conditions.
2. Warnings and Safety Information
- Use proper tools to avoid damage to the component or injury.
- If unsure about any procedure, consult a professional technician.
- If the component is connected to other systems, ensure those are inspected simultaneously for compatibility.
- Always wear appropriate safety equipment, such as gloves and goggles, during installation.
- Ensure the vehicle is on a flat, stable surface and the engine is off before beginning any work.
- Disconnect the battery if electrical work is involved to avoid hazards.
Failure to follow these warnings may result in serious injury or damage to the vehicle.
3. Product Information
Product Name: Automotive Parts
Model: CVS-68192-R
Batch Number: 20251023
Application:
- For Ford Expedition 2003-2018 2WD/4WD
- For Lincoln Navigator 2003-2006 2WD/4WD
Note: This kit is not suitable for models where the rear suspension is an air suspension system.
4. Package Contents
Verify that all components are present and undamaged before beginning installation.
- 2 x Front strut spacers
- 2 x Rear strut spacers
- 12 x Nuts
- 12 x Flat washers
5. Specifications
| Feature | Detail |
|---|---|
| Part Type | Strut spacer lift |
| Lift Height | 3.5" Front, 2.5" Rear |
| Spacer Thickness | 1.8" Front & 1.3" Rear |
| Material | Carbon Steel |
| Placement on Vehicle | Left, Right, Front, Rear |
| Item Weight | 6.2 kg (approx. 13.67 lbs) |
| Item Length | 33.5 cm (approx. 13.2 inches) |
| Item Width | 23.6 cm (approx. 9.3 inches) |
| Item Height | 15 cm (approx. 5.9 inches) |
| Country/Region of Manufacture | China Mainland |
Note: Spacer thickness to lift height is not a 1:1 ratio. Strut spacer installation alters the angle of the lower control arm, which accounts for additional lift beyond the actual thickness of the spacers.
6. Product Installation
6.1. Preparation
- Ensure the engine is off and the vehicle is on a flat, stable surface.
- Disconnect the battery (if required) to avoid electrical hazards.
- Gather all necessary tools and safety equipment (e.g., gloves, goggles).
6.2. Component Installation
- Carefully inspect the part for any damage or missing pieces.
- Align the component with the designated area following the vehicle's technical diagram.
- Use the recommended torque settings to tighten bolts or screws to avoid over-tightening or damaging parts.
- Reconnect any electrical connections, hoses, or brackets if applicable.
This kit is designed for user-friendly installation, requiring no cutting or drilling.
6.3. Final Inspection
- Double-check all connections and fasteners for security.
- Reconnect the battery (if previously disconnected).
- Perform a quick test (if feasible) to ensure the part is functioning as expected.
7. Initial Use and Operation
- After installation, monitor the component during the first operation to ensure proper function.
- Pay attention to any unusual sounds, vibrations, or warning lights.
8. Product Maintenance
8.1. Routine Inspection
- Schedule periodic inspections in alignment with the vehicle's maintenance plan.
- Look for signs of wear, corrosion, or leaks.
8.2. Cleaning & Care
- Clean the part with appropriate solutions (if applicable) to prevent dust and grime buildup.
- Avoid using high-pressure water jets or harsh chemicals that could damage sensitive components.
8.3. Replacement & Service
- Replace the component based on the vehicle's recommended service intervals or if wear is detected.
- If the component is connected to other systems, ensure those are inspected simultaneously for compatibility.
9. Troubleshooting
- If the component does not function correctly, check for loose connections, wear, or damage.
- If issues persist after basic checks, consult a professional technician.
10. User Tips
- An alignment is always recommended after altering the height of your vehicle to ensure proper handling and tire wear.
- Consider checking tire pressure after installation, as changes in suspension geometry can affect optimal pressure.
- Regularly inspect the lift kit components for any signs of stress or wear, especially after off-road use.
11. Customer Support
Our Customer Service team is available to assist you with inquiries related to the product, returns, repairs, or other support.
Contact Information:
- Email: support@maxpeedingrods.com
For the full user manual in PDF format, please refer to the official document: User Manual (PDF)
12. Environmental Responsibility
Dispose of old components in accordance with local environmental regulations. Recycle materials when possible, and avoid disposing of automotive parts in regular waste bins.
13. Manufacturer & EU Representative Information
Manufacturer: Chongqing Guoyu Technology Co., Ltd.
Manufacturer Address: Tuchang Town, Hechuan District, Chongqing, China
EU Authorized Representative:
GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA
CASTELLANA 9144, 28046 Madrid, Spain